• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.95-100
• /
• 2009

This study was conducted to develop an imaging processing system of inoculation processing of a lily callus. The image processing system was composed of a camera, a image processing board, and etc. And the illuminance always decided by setting up 55W/3 wavelength lamp respectively on all aspects and the side was maintained by the lighting part. The image characteristic was examined according to each frame of RGB,therefore the culture vessel was able to be separated with B frame. The required time was 2.2 seconds in one cycle from the image acquisition to obtaining the result. The recognition rate of the container was 100%, and the result of image processing showed that the recognition success rate of lily callus was 93%.

• Korean Institute of Interior Design Journal
• /
• v.16 no.6
• /
• pp.240-249
• /
• 2007

The purpose of this paper is to produce color harmony code based on color harmony prototype in terms of environmental color design. This paper proposes ways of categorizing more accurate color harmony prototype through digital image processing by the computer program called the Color Syntax. The method of analysis adopted in this paper is pixel based color image processing. The study suggests color harmony prototype which are categorized by a color harmony angles. These angles represented internal relations between colors. This study describes development processes of color harmony prototype which is a basis for creating color harmony codes. Development processes of color harmony schema consists of color analysis, color codes generation and color selection. Also, how to analyze color images and to chose suitable harmony color codes among various codes are main research issues. As a final result, 109 color harmony codes have been obtained. These code numbers are suggested through rotating 2 color pairs in a 360-degree arc in the same color harmony angles, the codes which is applicable to the color harmony schema previously developed. This color harmony codes will produce better color environment in a sense that it will help designers to maximally reduce their time consumption, and the results of their designs will also be related to the use of proper color for regional environments.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.943-944
• /
• 2008

In this paper, image processing technologies was employed to monitor and visualize the conditions of the inside of furnace for glass. In order to capture the images of the furnace under the high temperature environment, specially designed camera system was used. From the experimental results we see that the developed software showed good information about the inside conditions such as a scum line and positions of bubbles.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.5
• /
• pp.435-441
• /
• 2000

This paper deals with the development of RACOM(Radar Signal Detecting ＆ Processing Computer). RACOM is a radar display system specially designed for radar scan conversion, signal processing and PCI radar image display. RACOM contains two components； i )RSP(Radar Signal Processor) board which is a PCI based board for receiving video, trigger, heading & bearing signals from radar scanner ＆ tranceiver units and processing these signals to generate high resolution radar image, and ⅱ）Applications which perform ordinary radar display functions such as EBL, VRM and so on. Since RACOM is designed to meet a wide variety of specifications(type of output signal from tranceiver unit), to record radar images and to distribute those images in real time to everywhere in a networked environment, it can be applicable to AIS(Automatic Identification System) and VDR(Voyage Data Recorder).

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.19-20
• /
• 2010

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.342-348
• /
• 2002

This paper presents a computer image processing system, which measures the thickness of the ALC block and inspects the defect on a real-time basis. The Image processing system was established with a CCD camera, an image grabber, and a personal computer without using assembled measurement equipment. The image obtained by the system was analyzed by a devised algorithm, specially designed for the enhanced measurement accuracy. For the realization of proposed algorithm, the pre-processing method that can be applied to overcome uneven lighting environment, and threshold decision method, and subpixel method are developed. from the experimental results, we could find that the required measurement accuracy specification is sufficiently satisfied using our proposed method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.113-120
• /
• 2014

In this paper, we examine Asymmetric Multi-Processing Environment to provide LDW service. Asymmetric Multi-Processing Environment consists of high-speed MCU to support rapid image processing and low-speed MCU for controlling with other ECU at the control domain. Also we designed rapid image process application and LDW application Software Component(SW-C) according to the development process rule of AUTOSAR. To communicate between two MCUs, timer based polling based IPC was designed. Also to communicate with other ECUs(Electronic Control Units), we designed CAN messages to provide alarm information and receiving CAN message to catch the Turn signal. We confirm the possibility of the various ADAS development using an Asymmetric Multi-Processing Environment and AUTOSAR platform. We also expect providing ISO 26262 functional safety.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.5
• /
• pp.479-486
• /
• 2012

In this paper, a ranging system is proposed that is able to measure 360 degree omnidirectional distances to environment objects. The ranging system is based on the structured light imaging system with catadioptric omnidirectional mirror. In order to make the ranging system robust against environmental illumination, efficient structured light image processing algorithms are developed; sequential integration of difference images with modulated structured light and radial search based on Bresenham line drawing algorithm. A dedicated FPGA image processor is developed to speed up the overall image processing. Also the distance equation is derived in the omnidirectional imaging system with a hyperbolic mirror. It is expected that the omnidirectional ranging system is useful for mapping and localization of mobile robot. Experiments are carried out to verify the performance of the proposed ranging system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.33-52
• /
• 2008

This research intended to study a vehicle detection method for traffic volume, speed, stoping, parking activity, etc. using real time image processing and to propose the more accurate, environment adaptive image processing algorithm. The new method was compared with an existing commercialized image processing system, 'A' Product, for performance reliability tests. Also, the new method improved and developed the comparative advantage image processing algorithm. With regard to the test results, the algorithm over-counted one more vehicle, while 'A' product missed four vehicles during the test period. The first test results were used to improve the performance of this algorithm, and it's performance was improved though the second test in various and complicated traffic environment to yield superior performance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.2
• /
• pp.60-67
• /
• 2007

This paper describes the development of on-line computer vision laboratories to teach the detailed image processing and pattern recognition techniques. The computer vision laboratories include distant image acquisition method, basic image processing and pattern recognition methods lens and light, and communication. This study introduces a case study that teaches computer vision in distance learning. environment. It shows a schematic of a distant teaming workstation and contents of laboratories with image processing examples. The study focus more on the contents of the vision Labs rather than internet application method. The study proposes the ways to improve the on-line computer vision laboratories and includes the further research perspectives.