• 한국연소학회지
• /
• 제14권1호
• /
• pp.31-38
• /
• 2009

The effects of acoustic excitation of coaxial air on mixing enhancement and reduction of nitrogen oxides (NOx) emission were investigated. A compression driver was attached to the coaxial air supply tube to impose excitation. Measurements of NOx emission with frequency sweeping were performed to observe the trend of NOx emission according to the fuel and air flow conditions and to inquire about the effective excitation frequency for reducing NOx. Then, Schlieren photographs were taken to visualize the flow field and to study the effect of excitation. In addition, phase-locked particle image velocimetry (PIV) was performed to acquire velocity field for each case and to investigate the effect of vortices more clearly. Direct photographs and OH chemiluminescence photographs were taken to study the variation of flame length and reaction zone. It was found that acoustic forcing frequencies close to the resonance frequencies of coaxial air supply tube could reduce NOx emission. This NOx reduction was influenced by mixing enhancement due to large-scale vortices formed by fluctuation of coaxial air jet velocity.

• 대한기계학회논문집B
• /
• 제32권8호
• /
• pp.574-581
• /
• 2008

The characteristics of combustion and flow for a lean premixed flame in lab-scale gas turbine combustor was studied through experiment and numerical analysis. From the experiment, flame structure and heat release rate were obtained from OH emission spectroscopy. Qualitative comparisons were made line-integrated OH chemiluminescence image and abel-transformed one. NOx analyzer was implemented to get the characteristic of NOx exhaust from the combustor. From the numerical analysis, the thermal distribution and characteristic of recirculation zone with the change of fuel-air mixing degree, the characteristic of methane distribution with equivalence ratio in the combustor respectively. Total heat release rate is increased with increasing equivalence ratio. Thermal Nox is reduced with increasing fuel-air mixing degree. Increasing equivalence ratio results in the decrease of the size of reaction zone and alteration of the position of the reaction zone into the entrance of the combustor.

• 한국가스학회지
• /
• 제14권6호
• /
• pp.7-14
• /
• 2010

본 연구에서는 자착화특성이 다른 DME와 n-Butane을 이용하여 다양한 흡기공급방식에 따른 HCCI엔진연소에서 압력상승률의 저감특성에 대하여 조사하였다. 연소실내부의 가스압력측정, 광학측정용 엔진을 이용한 화학발광법의 측정 그리고 화학반응수치계산을 통하여 연소실내부에서 각 국소부분의 연소특성을 파악하였다. 최대압력상승률은 DME와 n-Butane의 혼합 상태에 의해 결정되어진다. DME가 성층화되고 n-Butane이 균일하게 분포되진 조건에서 가장 많이 감소되는데 두 연료가 균일한 경우에 비해서 최대압력상승률은 0.25MPa/ms 로 저감되었고 CA50도 5deg 지각되었다.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3625-3634
• /
• 2021

The crossflow is the key phenomenon in turbulent flow inside rod bundles. In order to establish confidence on application of computational fluid dynamics (CFD) to simulate the crossflow in rod bundles, three Reynolds-Averaged Navier Stokes (RANS) models i.e. the realizable k-ε model, the k-ω SST model and the Reynolds stress model (RSM), and the Large Eddy simulations (LES) with the Wall-Adapting Local Eddy-viscosity (WALE) model are validated based on the Particle Image Velocimetry (PIV) flow measurement experiment in a 5 × 5 rod bundle. In order to investigate effects of periodic boundary condition in the gap, the numerical results obtained with four inner subchannels are compared with that obtained with the whole 5 × 5 rod bundle. The results show that periodic boundaries in the gaps produce strong errors far downstream of the spacer grid, and therefore the full 5 × 5 rod bundle should be simulated. Furthermore, it can be concluded, that the realizable k-ε model can only provide reasonable results very close to the spacer grid, while the other investigated models are in good agreement with the experimental data in the whole downstream flow in the rod bundle. The LES approach shows superiority to the RANS models.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.43-52
• /
• 2007

Offset printing is one of the well known printing technique of lithographic process and consists of image area and 'non-image area on a flat image carrier. The surface tension of dampening water can be controlled by adding IPA after mixing of raw water and etching solution. The etching solution contains a surfactant for reducing surface energy, a clean agent for non-imaging area, wetting agent for protecting non-imaging area from oil components like ink and also an emulsifying agent for controlling emulsification. In this study, the present situation of dampening water maintenance has examined by collecting dampening water using at domestic companies. The pH related to dampening water, conductivity, contact angle, emulsification curve are measured to define the current situation of dampening water control of each companies and to analyze the relationship among measured properties. In the study most of companies among 16 printing companies tested controlling dampening water through pH value. However, the quality of printing has varied depending upon conductivity, contact angle, IPA content, and emulsification value. The control of dampening water should be carry at the state of the standard when adding proper ratio of etching solution. It would be more effective when pH or conductivity control carries out in parallel with controlling dampening water. Therefore the concept that pH5.5 is correct is based concept. Based on these initial tests it is defined that the standardization of dampening water control is required.

• 복식문화연구
• /
• 제17권6호
• /
• pp.1009-1020
• /
• 2009

This study aims to express the androgynous image via shirts as a fashion item. Shirts are widely worn as a fashion item regardless of sex and age, with growing importance as a casual outer, with the increase in leisure activities driven by the recent implementation of the 5-Day Work Week system in Korea. As for the theoretical background, the study was reviewed previous studies of books, thesis, a series of publication, and the Internet sites on this topic. Through a careful analysis of these previous studies, it designed and made shirts that inspired by androgynous image. Conclusions of this study are as follows: First, the study found that meanings of symbolism in clothing continue to change, not fixed at all, depending on historic and cultural environments, and so does symbolism for femininity and masculinity of clothing. Second, shirts are widely worn as a fashion item regardless of sex and age, with growing importance as a casual outer, with the increase in leisure activities driven by the recent implementation of the 5-Day Work Week system in Korea. Third, two patters were used for the work in this study in order to emphasize its form, along with mono color white and stripe patterns. For materials, cotton and blend as a most basic material for a shirt were used with unique variations in the form. Fourth, decorative details or trimming such as ribbon tying methods, shirring, attaching in layers, and irregular pleading widely used for women's wear were applied, and silhouettes with strong drape feelings were used to add feminine feature to men' shirts, in an effort to propose a fashion design of the androgynous look. Fifth, clothes proposed in this study are different from feminine clothing item blouse, because they are androgynous shirts mixing masculinity and femininity. Stiff pads were used in collars and cuffs characteristics of men's traditional shirts to maintain masculinity of a shirt, and design was developed by adding feminine decorative elements, which is different from women's blouse.

• 한국임상수의학회지
• /
• 제17권2호
• /
• pp.411-415
• /
• 2000

For comparison with conventional barium-gastrointestinal study, modified method using barium and methylcellulose was performed in 16 normal dogs (4-8 kg) divided into two groups. The group 1 received 8ml/kg of 40% w/v barium suspension only, and group 2 had taken 15 ml/kg of 0.6% w/v methylcellulose after administration 4 ml/kg of 40% w/v barium suspension by feeding tube. The barium suspension was prepared mixing full strength-barium suspension with water and methylcellulose solution was produced by blending methylcellulose sterilized water Sequential radiographs, lateral and ventrodorsal projections were obtained at 5 minute, 20 minute,40 minute. 60 minute and every 30 minutes thereafter, until the contrast is seen in the large intestine Inage qual- ity was rated by three veterinary radiologists as " poor" " fair ". "good", or "excellent" We analyzed the relationship between image quality,, transit time. Between two techniques, the modified method with 4ml of 40% w/v barium suspension and 15 ml of 0.6% w/v methylcellulose showed much better image quality ["excellent" result in 7 of the 8 subjects (88%)] and shorter transit time (107 minutes) toe the cecum. In addition, the best image quality was obtained at 20 and 40 minutes after admin-istration of contrast agent. It call be concluded the modified gastrointestinal study using methylcel-lulose after administration of barium suspension was a simple technique and easily improved the image quality and diagnostic accuracy of gstrointestinal disorders in small animal.racy of gstrointestinal disorders in small animal.

• 한국컴퓨터정보학회논문지
• /
• 제7권3호
• /
• pp.30-35
• /
• 2002

본 연구는 영상처리 기술을 활용하여 현재 섬유원단의 품질 검사를 자동화하기 위하여 CCD카메라에 의해 캡쳐된 영상을 받아 섬유 원단의 불량 여부를 판별하는 알고리즘을 개발하려는 것이다. 섬유 제조업에 이미지 처리기술을 활용, 섬유원단의 품질 검사에 적용하기 위한 알고리즘을 개발하면 섬유제조업 전반에 많은 생산성 향상을 꾀할 수 있을 것으로 기대할 수 있다. 본 연구는 섬유원단 무인 자동 검사를 위하여 섬유원단 검사과정에서 원단의 올빠짐, 이물질 첨가, 오염, 찢어짐 검사 등 품질에 중요한 영향을 미치는 부분에 대한 영상처리 알고리즘을 개발하였으며 또 섬유원단의 현저한 이색에 대한 검출 알고리즘을 개발하였고 이를 실용화하기 위한 기계제작을 통하여 알고리즘을 검증할 수 있었다. 이 연구를 통하여 섬유원단의 검사를 무인화하는 계기를 마련하였으며 보다 폭 넓은 생산품의 품질 검사부분에 영상처리 기술을 활용할 수 있는 방안을 제시하였다.

• 한국산업융합학회 논문집
• /
• 제6권1호
• /
• pp.23-29
• /
• 2003

This paper proposes an efficient feature extraction of the images by using independent component analysis(ICA) based on neural networks of the hybrid learning algorithm. The proposed learning algorithm is the fixed point(FP) algorithm based on Newton method and moment. The Newton method, which uses to the tangent line for estimating the root of function, is applied for fast updating the inverse mixing matrix. The moment is also applied for getting the better speed-up by restraining an oscillation due to compute the tangent line. The proposed algorithm has been applied to the 10,000 image patches of $12{\times}12$-pixel that are extracted from 13 natural images. The 144 features of $12{\times}12$-pixel and the 160 features of $16{\times}16$-pixel have been extracted from all patches, respectively. The simulation results show that the extracted features have a localized characteristics being included in the images in space, as well as in frequency and orientation. And the proposed algorithm has better performances of the learning speed than those using the conventional FP algorithm based on Newton method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권2호
• /
• pp.136-142
• /
• 2015

The shell and tube heat exchanger is an essential part of a power plant for recovering transfer heat between the feed water of a boiler and the wasted heat. The baffles are also an important element inside the heat exchanger. Internal materials influence the flow pattern in the bed. The influence of baffles in the velocity profiles was observed using a three-dimensional PIV (Particle Image Velocimetry) around baffles in a horizontal circular tube. The velocity of the particles was measured before the baffle and between them in the test tube. Results show that the velocity vectors near the front baffle flow along the vertical wall, and then concentrate on the upper opening of the front baffle. The velocity profiles circulate in the front and rear baffle. These profiles are related to the Reynolds number (Re) or the flow intensity. Velocity profiles at lower Re number showed complicated mixing to obtain the velocities and concentrate on the lower opening of the rear baffle as front wall. Numerical simulations were performed to investigate the effects of the baffle and obtain the velocity profiles between the two baffles. In this study, a commercial CFD package, Fluent 6.3.21 with the turbulent flow modeling, k-${\epsilon}$ are adopted. The path line and local axial velocities are calculated between two baffles using this program.