• 전기학회논문지
• /
• 제66권5호
• /
• pp.870-876
• /
• 2017

In this paper, we proposed the automatic vision inspection system using multi-layer perceptron to detect the defects occurred on rail surface. The proposed system consists of image acquisition part and analysis part. Rail surface image is acquired as equal interval using line scan camera and lighting. Mean filter and dynamic threshold is used to reduce noise and segment defect area. Various features to characterize the defects are extracted. And they are used to train and distinguish defects by MLP-classifier. The system is installed on HEMU-430X and applied to analyze the rail surface images acquired from Honam-line at high speed up to 300 km/h. Recognition rate is calculated through comparison with manual inspection results.

• 전자공학회논문지S
• /
• 제35S권4호
• /
• pp.76-84
• /
• 1998

The requirements of the accuracy, the high speed and the stability are very important factors in the defect-detection sytem for the texture. In this paper, we describe a novel scheme of the defect detection using a statistical behavior of defect patterns. Some prior knowledge as to the characteristics of flaws is that the defects are consistently distributed in the space and the noise are randomly generated. An empirical knowledge is adapted for the binarization and the determination process of defects in textured image. Since the process of the determination exclude the segmentations or delineation steps, we are able to meet the speed requirements. We show the validity of the scheme through the simulation of textured images.

• 한국컴퓨터정보학회논문지
• /
• 제20권10호
• /
• pp.23-29
• /
• 2015

In this paper, we suggest a method of detecting defects by applying Hough transform and least squares on ceramic images obtained from non-destructive testing. In the ceramic images obtained from non-destructive testing, the background area, where the defect does not exist, commonly show gradual change of luminosity in vertical direction. In order to extract the background area which is going to be used in the detection of defects, Hough transform is performed to rotate the ceramic image in a way that the direction of overall luminosity change lies in the vertical direction as much as possible. Least squares are then applied on the rotated image to approximate the contrast value of the background area. The extracted background area is used for extracting defects from the ceramic images. In this paper we applied this method on ceramic images acquired from non-destructive testing. It was confirmed that extracted background area could be effectively applied for searching the section where the defect exists and detecting the defect.

• 전자공학회논문지 IE
• /
• 제48권4호
• /
• pp.1-6
• /
• 2011

본 논문에서는 LCD 제조공정 상에서 발생할 수 있는 결함을 검사하고 분류할 수 있는 적응적인 LCD 표면 결함 검사 시스템을 제안하였다. 즉, 반복되는 LCD 패턴의 주기를 확정한 후에 결함 패턴을 검출하고 검출된 결함 패턴의 특징을 계산하여 결함을 분류하였다. 그리고 결함을 검출하는 과정에서 발생하는 잡음은 모폴로지 연산자를 이용하여 제거하였다. 또한, 검출된 결함 패턴에서 기하학적인 특징과 통계적 특징을 계산한 후 신경회로망 알고리즘을 이용하여 여러 종류의 결함 패턴을 적응적으로 분류하였으며, 실험 결과 92.3%의 결함 검출율 및 94.5%의 결함 분류 및 인식율을 획득함으로써, LCD 결함 검사 시스템의 실질적인 구현 가능성을 제시하였다.

• 전자공학회논문지 IE
• /
• 제48권2호
• /
• pp.26-31
• /
• 2011

본 논문에서는 LCD 제조공정 상에서 발생할 수 있는 결함을 검사하고 분류할 수 있는 적응적인 LCD 표면 결함 검사 시스템을 제안하였다. 즉, 반복되는 LCD 패턴의 주기를 확정한 후에 결함 패턴을 검출하고 검출된 결함 패턴의 특징을 계산하여 결함을 분류하였다. 그리고 결함을 검출하는 과정에서 발생하는 잡음은 모폴로지 연산자를 이용하여 제거하였다. 또한, 검출된 결함 패턴에서 기하학적인 특징과 통계적 특징을 계산한 후 신경회로망 알고리즘을 이용하여 여러 종류의 결함 패턴을 적응적으로 분류하였으며, 실험 결과 92.3%의 결함 검출율 및 94.5%의 결함 분류 및 인식율을 획득함으로써, LCD 결함 검사 시스템의 실질적인 구현 가능성을 제시하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권12호
• /
• pp.6043-6062
• /
• 2019

Low-rank matrix decomposition has shown its capability in many applications such as image in-painting, de-noising, background reconstruction and defect detection etc. In this paper, we consider the texture background of rail track images and the sparse foreground of the defects to construct a low-rank matrix decomposition model with block sparsity for defect inspection of rail tracks, which jointly minimizes the nuclear norm and the 2-1 norm. Similar to ADM, an alternative method is proposed in this study to solve the optimization problem. After image decomposition, the defect areas in the resulting low-rank image will form dark stripes that horizontally cross the entire image, indicating the preciselocations of the defects. Finally, a two-stage defect extraction method is proposed to locate the defect areas. The experimental results of the two datasets show that our algorithm achieved better performance compared with other methods.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.259-263
• /
• 2006

The applicability of UPT (Ultrasound Pulse Thermography) for real-time defect detection of the ceramic heating plate is described. The ceramic heating plate with superior insulation and high radiation is used to control the water temperature in underwater environment. The underwater temperature control system can be damaged owing to the short circuit, which resulted from the defect of the ceramic heating plate. A high power ultrasonic energy with pulse duration of 280 ms was injected into the ceramic heating plate in the vertical direction. The ultrasound excited vibration energy sent into the component propagate inside the sample until they were converted to the heat in the vicinity of the defect. Therefore, an injection of the ultrasound pulse wave which results in heat generation, turns the defect into a local thermal wave transmitter. Its local emission is monitored and recorded via the thermal infrared camera at the surface which is processed by image recording system. Measurements were Performed on 4 kinds of samples, composed of 3 intact plates and the defect plate. The observed thermal image revealed two area of crack in the defective ceramic heating plate.

• 한국인터넷방송통신학회논문지
• /
• 제13권1호
• /
• pp.55-62
• /
• 2013

동판 생산량의 증가와 수요의 활성화로 더욱 동판에 대한 자동 검사 시스템이 필요하게 되었다. 본 연구에서는 동판의 3차원 표면형상 및 결함 검출을 하기 위한 3차원 영상 분석 시스템 및 GUI를 개발했다. 2차원 영상을 통해 분석을 할 수 있으나 오류가 많이 발생하기 쉽고, 작업자가 분석하기에는 무리가 따르기 때문에 3차원 영상으로 분석하여 살펴보고 자동으로 판정을 내리므로 작업자가 사용하기 쉽다. 동판 제작 공정에서 발생되는 검사 방법에서 사람에 의한 육안 검사가 주로 행해지고 있는데, 여기서 자동 검사를 통해 정확한 검사율과 비용 발생을 감소를 할 수 있다. 동판에 대한 결함을 정의하고, 동판 결함 검사 측정을 위한 시스템을 개발한다. 그리고 분석 알고리즘과 3차원 영상 분석 프로그램을 개발하여 동판에 결함을 자동 검출한다.

• 한국가시화정보학회지
• /
• 제19권1호
• /
• pp.68-73
• /
• 2021

In this study, the detection of rubber o-ring defects was carried out using k-fold cross validation and Support Vector Machine (SVM) algorithm. The data process was carried out in 3 steps. First, we proceeded with a frame alignment to eliminate unnecessary regions in the learning and secondly, we applied gray-scale changes for computational reduction. Finally, data processing was carried out using image augmentation to prevent data overfitting. After processing data, SVM algorithm was used to obtain normal and defect detection accuracy. In addition, we applied the SVM algorithm through the k-fold cross validation method to compare the classification accuracy. As a result, we obtain results that show better performance by applying the k-fold cross validation method.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 추계학술발표대회
• /
• pp.124-125
• /
• 2023

Defect detection during liquid crystal display (LCD) manufacturing has always been a critical challenge. This study aims to address this issue by proposing a data augmentation method based on generative adversarial networks (GAN) to improve defect identification accuracy in LCD production. By leveraging synthetically generated image data from GAN, we effectively augment the original dataset to make it more representative and diverse. This data augmentation strategy enhances the model's generalization capability and robustness on real-world data. Compared to traditional data augmentation techniques, the synthetic data from GAN are more realistic, diverse and broadly distributed. Experimental results demonstrate that training models with GAN-generated data combined with the original dataset significantly improves the detection accuracy of critical defects in LCD manufacturing, compared to using the original dataset alone. This study provides an effective data augmentation approach for intelligent quality control in LCD production.