• Journal of radiological science and technology
• /
• v.45 no.2
• /
• pp.135-143
• /
• 2022

In SPECT image, scatter count is the cause of quantitative count error and image quality degradation. This study is to evaluate the accuracy of CT based SC(CTSC) and energy window based SC(EWSC) as the comparison with existing Non SC. SPECT/CT images were obtained after filling air in order to acquire a reference image without the influence of scatter count inside the Triple line insert phantom setting hot rod(^99mTc 74.0 MBq) in the middle and each SPECT/CT image was obtained each separately after filling water instead of air in order to derive the influence of scatter count under the same conditions. For EWSC, 9 sub-energy windows were set additionally in addition to main energy window(140 keV, 20%) and then, images were acquired at the same time and five types of EWSC including DPW(dual photo-peak window)10%, DEW(dual energy window)20%, TEW(triple energy window)10%, TEW5.0%, TEW2.5% were used. Under the condition without fluctuations in primary count, total count was measured by drawing volume of interest (VOI) in the images of the two conditions and then, the ratio of scatter count of total counts was calculated as percent scatter fraction(%SF) and the count error with image filled with water was evaluated with percent normalized mean-square error(%NMSE) based on the image filled with air. Based on the image filled with air, %SF of images filled with water to which each SC method was applied is non scatter correction(NSC) 37.44, DPW 27.41, DEW 21.84, TEW10% 19.60, TEW5% 17.02, TEW2.5% 14.68, CTSC 5.57 and the scatter counts were removed the most in CTSC and %NMSE is NSC 35.80, DPW 14.28, DEW 7.81, TEW10% 5.94, TEW5% 4.21, TEW2.5% 2.96, CTSC 0.35 and the error in CTSC was found to be the lowest. In SPECT/CT images, the application of each scatter correction method used in the experiment could improve the quantitative count error caused by the influence of scatter count. In particular, CTSC showed the lowest %NMSE(=0.35) compared to existing EWSC methods, enabling relatively accurate scatter correction.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.1
• /
• pp.46-54
• /
• 2002

Plasma Display Panel (PDP) is required to be both the determination of white point of each gray level and the inverse gamma correction since no-balanced RGB cell and linear property of PDP, respectively. However, these two methods cause degradation of grey level representation and undesirable false contour in the dark areas on PDP. In this paper, we implemented real time image processor of the proposed error diffusion algorithm and unsharp masking operation to protect the blurring image caused by the error diffusion. Experimental results showed drastic improvements of gray level representation and reduction of undesirable false contour.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.268-272
• /
• 1996

Error correction effect for maladjusted stereo cameras with calibrated pixel distance parameter is presented. The camera calibration is a necessary procedure for stereo vision-based depth computation. Intra and extra parameters should be obtain to determine the relation between image and world coordination through experiment. One difficulty is in camera alignment for parallel installation: placing two CCD arrays in a plane. No effective methods for such alignment have been presented before. Some amount of depth error caused from such non-parallel installation of cameras is inevitable. If the pixel distance parameter which is one of intra parameter is calibrated with known points, such error can be compensated in some amount. Such error compensation effect with the calibrated pixel distance parameter is demonstrated with some experimental results.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1212-1214
• /
• 2003

The usual technique of correction and positioning of film image of RS require enough control points to provide the geographic coordinate. Some distortion and error caused by earth curvature and terrain and photograph tilt can't be eliminated by these ways. In this paper a set of technique of systemic correction and positioning of remote sensing image base on orbit parameter is described, some questions in its realization and their solvent also included.

• Journal of Platform Technology
• /
• v.12 no.3
• /
• pp.16-26
• /
• 2024

Videos shot underwater are known to have significant color distortion. Typical causes are backscattering by floating objects and attenuation of red colors in proportion to the depth of the water. In this paper, we aim to analyze color correction performance and color distortion patterns for images taken underwater. Backscattering and attenuation caused by suspended matter will be discussed in the next study. In this study, based on the DeepSeeColor model proposed by Jamieson et al., we verify color correction performance and analyze the pattern of color distortion according to changes in water depth. The input images were taken in the US Virgin Islands by Jamieson et al., and out of 1,190 images, 330 images including color charts were used. Color correction performance was expressed as angular error using the input image and the correction image using the DeepSeeColor model. Jamieson et al. calculated the angular error using only black and white patches among the color charts, so they were unable to provide an accurate analysis of overall color distortion. In this paper, the color correction error was calculated targeting the entire color chart patch, so an appropriate degree of color distortion can be suggested. Since the input image of the DeepSeeColor model has a depth of 1 to 8, color distortion patterns according to depth changes can be analyzed. In general, the deeper the depth, the greater the attenuation of red colors. Color distortion due to depth changes was modeled in the form of scale and offset movement to predict distortion due to depth changes. As the depth increases, the scale for color correction increases and the offset decreases. The color correction performance using the proposed method was improved by 41.5% compared to the conventional method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.774-781
• /
• 2003

The important factors that cause position error in X-Y robot are inertial force, frictions and spring distortion in screw or coupling. We have to estimate these factors precisely to correct position errors, Which is very difficult. In this paper, we makes systems to inspect metal stencil which is used to print solder paste on pads of SMD of PCB with low precision X-Y robot and vision system. To correct position error that is caused by low precision X-Y robot, we defines position error vector that is formed with position of objects that exist in reference and camera image. We apply MHT(Modified Hough Transformation) for the aim of determining the dominant position error vector. We modify reference image using extracted dominant position error vector and obtain reference image that is the same with camera image. Effectiveness and performance of this method are verified by simulation and experiment.

• The KIPS Transactions:PartB
• /
• v.9B no.1
• /
• pp.91-98
• /
• 2002

In this paper, an implementation method of the efficient image transmission stage using watermarking and channel ceding is proposed. Usually, image communication system consists of both a transmitter part and a receiver part. The transmitter part takes charge of copyright protection of the generated image data, and image coding and compression that can deal with channel noises when transmitting. In the transmitter part, we propose a channel coding method which protects both the watermark signal and the original signal for protecting the copyright of image data and solving channel noises when transmitting. Firstly, copyright protection of image data is conducted. For this, image structure analysis is performed, and both the improvement of image quality and the generation of the watermark signal are made. Then, the histogram is constructed and the watermark signals are selected from this. At this stage, by embedding of the coefficients of curve fittness into the lower 4 bits of the image data pixels, image quality degradation due to the embedding of watermark signals are prevented. Finally, turbo coding, which has the most efficient error correction capability in error correction codes, has been conducted to protect signals of watermark and preserved original image quality against noises on the transmission channel. Particularly, a new interleaving method named "semi random inter]easer" has been proposed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.10
• /
• pp.817-824
• /
• 2014

Accelerometer and laser vibrometers are widely used to measure vibration of structures like a building or piping. Recently, the research measuring vibration by using camera image is introduced. However, this method has a disadvantage. If camera moves by the vibration cannot measure the vibration displacement of structure. We proposed the enhanced technique for measuring vibration using camera. This paper took the experiment for correction of error due to camera shaking. We verified through an experiment. And the accuracy of the method measuring the vibration displacement by using the camera images was analyzed.

• Journal of Biomedical Engineering Research
• /
• v.12 no.1
• /
• pp.49-56
• /
• 1991

In this paper, a method for camera position estimation in gasher using elechoendoscopic image sequence is proposed. In orders to obtain proper image sequences, the gasser in divided into three sections. It Is presented thats camera position modeling for 3D information extvac lion and image distortion due to the endoscopic lenses is corrected. The feature points are represented with respect to the reference coordinate system below 10 percents error rate. The faster distortion correction algorithm is proposed in this paper. This algorithm uses error table which is faster than coordinate transform method using n -th order polynomials.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.2
• /
• pp.93-101
• /
• 2015

Purpose In SPECT image, scatter count is the cause of quantitative count error and image quality degradation. Thus, a wide range of scatter correction(SC) methods have been studied and this study is to evaluate the accuracy of CT based SC(CTSC) used in SPECT/CT as the comparison with existing energy window based SC(EWSC). Materials and Methods SPECT/CT images were obtained after filling air in order to acquire a reference image without the influence of scatter count inside the Triple line insert phantom setting hot rod(74.0 MBq) in the middle and each SPECT/CT image was obtained each separately after filling water instead of air in order to derive the influence of scatter count under the same conditions. In both conditions, Astonish(iterative : 4 subset : 16) reconstruction method and CT attenuation correction were commonly applied and three types of SC methods such as non-scatter correction(NSC), EWSC, CTSC were used in images filled with image. For EWSC, 9 sub-energy windows were set additionally in addition to main(=peak) energy window(140 keV, 20%) and then, images were acquired at the same time and five types of EWSC including DPW(dual photo-peak window)10%, DEW(dual energy window)20%, TEW(triple energy window)10%, TEW5.0%, TEW2.5% were used. Under the condition without fluctuations in primary count, total count was measured by drawing volume of interest (VOI) in the images of the two conditions and then, the ratio of scatter count of total counts was calculated as percent scatter fraction(%SF) and the count error with image filled with water was evaluated with percent normalized mean-square error(%NMSE) based on the image filled with air. Results Based on the image filled with air, %SF of images filled with water to which each SC method was applied is NSC 37.44, DPW 27.41, DEW 21.84, TEW10% 19.60, TEW5% 17.02, TEW2.5% 14.68, CTSC 5.57 and the most scattering counts were removed in CTSC and %NMSE is NSC 35.80, DPW 14.28, DEW 7.81, TEW10% 5.94, TEW5% 4.21, TEW2.5% 2.96, CTSC 0.35 and the error in CTSC was found to be the lowest. Conclusion In SPECT/CT images, the application of each scatter correction method used in the experiment could improve the quantitative count error caused by the influence of scatter count. In particular, CTSC showed the lowest %NMSE(=0.35) compared to existing EWSC methods, enabling relatively accurate scatter correction.