• 펄프종이기술
• /
• 제42권3호
• /
• pp.1-6
• /
• 2010

A new testing method named pitch deposit tester (PDT) was developed by KRICT in order to evaluate the deposit potential of micro-stickies. The new method involves depositing the potential pitch particles on the air bubble covered plastic film set in the pitch deposit tester (PDT) and analysing the deposited area by an image analyzer. In this study, the effect of fixing agents on potential pitch deposition was elucidated. The effects of some fixing agents (polyamine and polyethyleneimine) on pitch control were investigated by the PDT test of 100% recycled newsprint stock. The study suggested that proper use of the PEI can lead to better pitch control than that of polyamine. The efficiency of novel screening method using the PDT and retention and drainage analyser (RDA) for fixing agents in terms of retention and deposit contamination could be confirmed by above mentioned results.

• 한국군사과학기술학회지
• /
• 제9권4호
• /
• pp.128-136
• /
• 2006

The purpose of this paper is to examine the dynamic stall characteristics of an elliptic airfoil when subject to constant pitch motions. In this study, which was motivated by the pressing need for a greater understanding of the reduced frequency$({\kappa})$ effects on flow patterns of elliptic airfoil, the various reduced frequencies were considered. The result confirms that the reduced frequency has a profound effects on the flow patterns. The increase of ${\kappa}$ accelerate the separation bubble bursting process up to ${\kappa}=0.10$, then diminish with further increase in ${\kappa}$. Compared with static condition, the dynamic pitching airfoil delays stall angle approximate $4{\circ}{\sim}5{\circ}$ during pitch-up stroke for ${\kappa}=0.10$. Results from this qualitative analysis provided valuable insight Into the control of dynamics stall.

• 비교문화연구
• /
• 제37권
• /
• pp.157-183
• /
• 2014

Although Marguerite Yourcenar, a representative French woman writer, lived 47 years in the United States from 1939 to 1987, the American influence on her life has not been studied either at home or abroad. The purpose of this study is to examine chronologically the American influence on the following three literary works of Yourcenar: The Little Mermaid (1942), River Deep, Dark River (1966) and Recluse (1982). The Little Mermaid is a drama, presented in musical format, about the identity crisis and inner conflict of Yourcenar. Unlike the little mermaid who burst like a bubble in Hans Christian Andersen's fairy tale, Yourcenar associates her death with the image of ascension. River Deep, dark river is a translation of the Negro spiritual expressing the suffering of African Americans. Recluse, her last novel, deals with the life story of a simple man living in nature on a small island. This novel shows Yourcenar's desire for a pure world that is not defiled by human greed. Yourcenar sponsored major human rights organizations and environmental groups in her life, and donated her entire fortune for human rights and the protection of Wild Fauna and Flora. The American influence on the literary works of Yourcenar can be summarized as a "great turning point", because she was transformed from a humanistic writer into an intellectual actor.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.317-317
• /
• 2023

수자원의 확보와 어류 서식 환경보전이라는 두 가지 측면은 수자원 이용이라는 목적하에 합의되기 어려운 문제를 가지고 있다. 점차적으로 수자원이 고갈되는 현시점에 효율적 물관리를 위해 최근에는 단절된 하천을 연결하기 위한 기술들이 개발되고 있으며, 이중 안정적인 물공급 시스템을 구축하기 위한 수중터널이 그러한 기술 중 하나이다. 수자원의 확보 측면에서는 의미가 있는 방법일 수 있으나 물리적으로 동떨어져 있던 서로 다른 환경을 연결하는 문제로 인한 부작용이 발생하는데 이중 외래어종 유입으로 인한 수중생물의 환경변화가 가장 큰 문제로 대두되고 있다. 이러한 문제를 방지하기 위해 어류의 이동을 차단하는 기술 또한 개발되고 있으며 그물망, 버블스크린, 빛, 소리를 이용한 다양한 방법을 통해 어류의 접근을 방지하고자 노력하고 있다. 본 연구에서는 이러한 차단시설 중 기포를 이용한 버블스크린과 관련하여 효율성을 높이기 위한 방법을 모색하고자 실제 버블의 상승속도에 영향을 미치는 여러 가지 불확실성 인자들에 대한 상관성과 인과관계를 검토하고자 하였다. 이를 위해서 외부적 원인에 대한 오차요소를 확인하고 결과값에 영향을 미치는 여러 가지 변수에 대하여 검토하고자 하는 실험연구를 수행하였다. 버블실험을 위한 수로는 길이 15m, 폭 1.5m 의 제원을 가지는 직선수로에서 수행하였으며, 버블 발생을 위한 튜브는 PVC 재질이며, 5cm 간격으로 1mm 직경을 갖는 파이프를 제작하여 활용하였다. 실험의 분석은 이미지를 이용한 방법을 사용하였으며 분석위치 및 버블사이즈 그리고 해석격자 크기에 대한 상관분석 및 회귀분석을 통해 각각 인자들과의 관계를 규명하고자 하였다.

• Elastomers and Composites
• /
• 제58권4호
• /
• pp.208-215
• /
• 2023

In this study, the properties of polyurethane-polydimethylsiloxane (PU-PDMS) hybrid foams containing different types and contents of physical blowing agents (PBAs) were investigated. Two types of blowing agents, namely physical blowing agents and thermally expandable microspheres (TEM), were applied. The apparent density was measured using precisely cut foam samples, and the pore size was measured using image software. In addition, the microstructure of the foam was confirmed via scanning electron microscopy and transmission electron microscopy. The thermal conductivities related to the microstructures of the different foams were compared. When 0.5 phr of the hydrocarbon-based PBA was added, the apparent density and pore size of the foam were minimal; however, the pore size was larger than that of neat foam. In contrast, the addition of 3 phr of TEM effectively reduced both the apparent density and pore size of the PBAs. The increase in resin viscosity owing to TEM could enhance bubble production stability, leading to the formation of more uniform and smaller pores. These results indicate that TEM is a highly efficient PBA that can be employed to decrease the weight and pore size of PU-PDMS hybrid foams.

• 대한기계학회논문집B
• /
• 제26권6호
• /
• pp.893-901
• /
• 2002

Effect of boundary layer thickness on the flow characteristics around a rectangular prism has been investigated by using a PIV(Particle Image Velocimetry) technique. Three different boundary layers(thick, medium and thin)were generated in the Atmospheric Boundary Layer Wind Tunnel at Pusan National University. The thick boundary layer having 670 mm thickness was generated by using spires and roughness elements. The medium thickness of boundary layer($\delta$=270 mm) was the natural turbulent boundary layer at the test section floor with fairly long developing length(18 m). The thin boundary layer($\delta$=36.5 mm) was generated on the smooth panel elevated 70cm from the wind tunnel floor. The Reynolds number based on the free stream velocity(3 ㎧) and the height of the model(40 mm) was 7.9$\times$10$^3$. The mean velocity vector fields and turbulent kinetic energy distributions were measured and compared. The effect of boundary layer thickness was clearly observed not only in the length of separation bubble but also in the location of reattachment point. The thinner the boundary layer thickness, the higher the turbulent kinetic energy Peak around the model roofbecame. It is strongly recommended that the height ratio between the model and the approaching boundary layer thickness should be encountered as a major parameter.

• 대한기계학회논문집B
• /
• 제26권4호
• /
• pp.578-586
• /
• 2002

Flow structures around a rectangular prism have been investigated by using a PIV(Particle Image Velocimetry) technique. A thick turbulent boundary layer was generated by using spires arid roughness elements. The boundary layer thickness, displacement thickness and momentum thickness were 650mm, 117.4mm and 78mm, respectively. The ratio between the model height(40mm) and the boundary layer thickness H/$\delta$, was 0.06. The Reynolds number based on the free stream velocity and the height of the model was 7.9$\times$10$^3$. The PIV measurements were performed at three different wall normal planes. Three recirculation regions at forward facing step, top of the roof and backward facing step are clearly seen and show three dimensional features. Dramatic changes of flow patterns are observed in the wake regions in the different spanwise wall normal planes. Instead of reattachment and recirculation zone, rising streamlines are depicted at the normal planes near the side wall due to the interaction with a rising horse shoe vortex. The peak of turbulent kinetic energy occurs at the separation bubble on top of the roof and the magnitude is 2.5 times higher compared with that of the wake region.

• 핵의학기술
• /
• 제13권1호
• /
• pp.3-8
• /
• 2009

목적 : Onco Flash를 이용하여 영상을 재구성하여 OSEM과 비교하고 유용성을 평가해본다. 검사시간을 절반으로 줄여도 기존의 영상에 상응하는 분해능을 가진 영상을 나타낼 수 있는지 실험해보았다. 실험재료 및 방법 : Spatial resolution phantom을 이용하여 scattering과 non-scattering 상황에서 수집시간을 10, 20, 30 sec/frame으로 영상을 획득하였다. 영상을 OSEM, Onco Flash로 각각 재구성하고 FWHM을 구하여 평가하였다. Onco Flash 재구성 최적의 조건 설정을 찾아내기 위하여 iteration 값을 4, 7, 10, 13, 16, 19로 변화시켜 영상을 획득하고, FWHM을 구하여 평가하였다. 또한 Jaszczak phantom을 이용하여 scattering과 non-scattering 상황에서 영상을 획득하고, OSEM과 Onco Flash 프로그램으로 재구성하여 평가를 실시하였다. 결과 : Spatial resolution phantom을 이용한 평가 중 scattering에서 OSEM으로 재구성한 10, 20, 30 sec/frame의 FWHM이 11.09, 8.51, 8.02 mm로, Onco Flash로 재구성하였을 경우 8.35, 7.82, 7.38 mm로 나타났다. 또한 non-scattering에서 OSEM으로 재구성한 10, 20, 30 sec/view의 FWHM이 9.08, 8.28, 8.04 mm로, Onco Flash로 재구성하였을 경우 8.12, 7.46, 7.11 mm로 나타났다. 최적의 Onco Flash 매개변수를 찾기 위한 실험에서 iteration을 변화시켜본 결과, 각각의 FWHM이 8.17, 7.62, 6.91, 6.85, 6.74, 6.67 mm로 나타났다. Blind test에서도 다수의 인원이 Onco Flash 영상이 우수하다고 평가 하였다. 결론 : Onco Flash를 적용하면 같은 조건이 주어졌을 경우 질적으로 더욱 향상된 영상을 얻을 수 있거나, 또는 검사시간을 단축시켜서도 OSEM에 상응하는 결과를 도출할 수 있다. 즉, 일정한 범위 내에서는 time per view나 iteration과 같은 매개 변수를 임의로 조절하여도 질적으로 향상된 영상을 얻을 수 있다. 그러나 Onco Flash를 적용함에 있어 불가피하게 약간의 데이터 손실이 발생하므로, 각 장비와 프로그램에 적절한 조건을 파악하여야 한다. 또한 최상의 조건에서 검사가 이루어질 수 있도록 권장되는 지침 안에서 상황에 맞는 매개 변수를 적용하여야 할 것이다.

• 한국해양공학회지
• /
• 제30권1호
• /
• pp.44-50
• /
• 2016

An experimental study was performed to investigate the behavior of green water on a structure with a rectangular cross section under wave conditions, along with the flow characteristics in bubbly water flow. An experiment was conducted in a two-dimensional wave flume using an acrylic model (1/125) of FPSO BW Pioneer operating in the Gulf of Mexico under its design wave condition. The occurrence of green water, including its development, in front of the model was captured using a high-speed Charge Coupled Device (CCD) camera with the shadowgraph technique. Using consecutive images, the generation procedure for green water on the model was divided into five phases: flip through, air entrapment, wave run-up, wave overturning, and water shipping. In addition, the distinct water elevations of the green water were defined as the height of flip through, height of splashing jet, and height of freeboard exceedance, and showed a linear relationship with the incoming wave height.

• Wind and Structures
• /
• 제23권2호
• /
• pp.127-142
• /
• 2016

Aerodynamic effects, such as drag force and flow-induced vibration (FIV), on civil engineering structures can be minimized by optimally modifying the structure shape. This work investigates the turbulent wake of a square prism with its faces modified into a sinusoidal wave along the spanwise direction using three-dimensional large eddy simulation (LES) and particle image velocimetry (PIV) techniques at Reynolds number $Re_{Dm}$ = 16,500-22,000, based on the nominal width ($D_m$) of the prism and free-stream velocity ($U_{\infty}$). Two arrangements are considered: (i) the top and bottom faces of the prism are shaped into the sinusoidal waves (termed as WSP-A), and (ii) the front and rear faces are modified into the sinusoidal waves (WSP-B). The sinusoidal waves have a wavelength of $6D_m$ and an amplitude of $0.15D_m$. It has been found that the wavy faces lead to more three-dimensional free shear layers in the near wake than the flat faces (smooth square prism). As a result, the roll-up of shear layers is postponed. Furthermore, the near-wake vortical structures exhibit dominant periodic variations along the spanwise direction; the minimum (i.e., saddle) and maximum (i.e., node) cross-sections of the modified prisms have narrow and wide wakes, respectively. The wake recirculation bubble of the modified prism is wider and longer, compared with its smooth counterpart, thus resulting in a significant drag reduction and fluctuating lift suppression (up to 8.7% and 78.2%, respectively, for the case of WSP-A). Multiple dominant frequencies of vortex shedding, which are distinct from that of the smooth prism, are detected in the near wake of the wavy prisms. The present study may shed light on the understanding of the underlying physical mechanisms of FIV control, in terms of passive modification of the bluff-body shape.