• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1774-1778
• /
• 2008

유량 환산에 이용되는 수위-유량 관계곡선식은 하천의 흐름을 정상 등류상태로 가정하고 유속계를 하천에 투입하여 년간 정해진 횟수의 유량측정을 실시하여 이로부터 갱신하여 작성하고 있다. 평수기에는 이렇게 기기를 이용하여 유량측정이 가능하지만 홍수기나 갈수기에는 접촉식 유속계를 이용한 하천유량 측정이 불가능한 실정이다. 홍수기에는 기기 손상과 관측자의 안전이 위협받는 실정이고, 갈수기에는 유속이 너무 느려서 (0.1 m/s 이하) 프로펠러 유속계의 경우 유속의 정확한 관측이 힘들다. 또한 전지구적 빈번한 이상기후의 현실정에서 가장 중요한 기초 수문자료인 홍수량의 정확한 측정 자료는 많지 않다. 홍수유량을 측정하기 위해서 현재에도 기존의 봉부자를 이용하거나 유비쿼터스 센서를 장착한 봉부자를 이용하는 유량측정 기법이 향해지고 계속적으로 소개되고 있는 실정이지만 봉부자의 특성상 정확한 유량을 계산하기에는 어려움이 많다. 현재 선진국에서는 흐름과 비접촉식 방법을 이용한 하천유량측정 방법이 지난 10 여년간 꾸준이 연구되어 왔다. 그중 대표전인 것이 전자파를 이용한 방법과 영상해석에 의한 방법이다. 전자의 경우 국내에서는 수자원공사에서 10년 이상 연구 개발하여 상품화 시킨바 현업에서 이를 이용하여 홍수유량측정을 실시하고 있다. 후자의 방법은 유체역학 분야에서 흐름해석에 주로 이용되어지던 PIV(particle image velocimetry) 기법을 하천과 같이 대규모의 흐름영역에 적용가능하도록 개발된 기술로 LSPIV (large-casle particle image velocimetry)라 불리우는 기술이다. 본 연구에서는 미국 Iowa 대학에서 개발한 LSPIV를 이용하여 홍수파의 진행시 수위와 유량의 두 변수 사이에 나타나는 Loop rating curve의 이론적인 관계를 하천현장에서 일정시간 간격으로 실측을 통하여 파악하고자 하였다. 현장실험을 위한 대상지점으로 미국 Iowa주 Coralville 시내 Clear Creek의 USGS (US Geologival Survey) 수위관측소 지점을 선택하여 본 연구에서 실시한 유량측정 결과의 비교가 가능토록 하였다. LSPIV는 그 특성상 야간에는 적용하는데 어려움이 있어 아침시간부터 해가 지기 직전까지의 자연채광 조건의 영상취득이 가능한 시간대에서 표면유속을 측정하였고 이에 수심평균유속환산계수를 적용하여 유량을 계산하였다. 강우의 발생으로 인한 홍수파의 진행시 총 43회의 유량을 측정하였는바 이를 이용하여 이 지점의 수위-유량 관계식과 비교한 결과 거의 일치하는 결과를 나타냈다. 특히 홍수파의 진행시 고수위 영역에서의 측정한 결과는 수위의 상승기에는 최고로 7.5% 까지 측정유량이 수위-유량관계식에서 계산한 유량보다 컸으며, 수위의 하강기에는 반대로 최고 5.4% 정도까지 측정유량이 수위-유량관계식에서 계산한 유량보다 작게 나타났다. 또한 최대유량의 발생시기는 최고수위 발생직전의 수위라는 것이 파악되었다. 이러한 경향은 수위-유량 관계곡선의 이론과 잘 일치하는 것이다.

• Sleep Medicine and Psychophysiology
• /
• v.6 no.2
• /
• pp.110-115
• /
• 1999

Objectives: To investigate the effect of mandibular repasitioning device on airway sige and airway collapsibility in patients with obstructive sleep apnea syndrome(OSAS). Methods: Cine CT with polysomnographic monitoring was performed during sleep in nine(OSAS) patients before and after manibular repositioning device(MRD) application. Axial CT images were obtained in five upper airway levels(retropalatal-high, retroalatal-low, retroglossal, epiglottis, and hypopharynx levels). In each airway level, one axial CT image was obtained during sleep apnea period and 10 serial axial CT images were scanned every 1 second during normal sleep breathing. After wearing MRD, all CT images were obtained by the same method. The cross-sectional areas of airway were measured by automatic tracing method. The changes of minimum airway size and maximum airway size after MRD were evaluated. The airway collapsibility was calculaed before and after MRD. Results: During sleep apnea, the airway of retropalatal-low level was the most frequently narrowest site. During normal sleep breahing the minimum airway size was increased significantly after MRD at retropalatal-low level(p=0.011). The mean airway collapsibility was the highest at retropalatal-low level. MRD decreased the airway collapsibility significantly at retropalatal-low level(p=0.021) and epiglottis level(p=0.038). Conclusions: The enlargement of the minimum airway size and decreased airway collapsibility may be the therapeutic mechanism of MRD in obstructive sleep apnea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.2
• /
• pp.96-107
• /
• 2016

This study is an attempt to trace the origins of Korean botanical gardens prior to the construction of the botanical garden in Changgyeonggung Palace. We trace the time period during which Korean intellectuals first understood and appropriated botanical gardens based on accounts found in travel journals. These were written by members of delegations sent to Japan, Russia, and Great Britain and by students who had studied abroad, such as Tchi-Ho Yun and Kil-Chun Yu, during the open port period from 1876 to 1910. This study shows that the term "botanical garden" did not appear in any of the travel journals and the delegations did not show much interest in them until the 1880s. Japan had planned to introduce the different types of botanical gardens to the delegations from the Joseon Dynasty, but the delegations left no official records or related accounts regarding their visits. In contrast, members of delegations who were sent to Russia, Europe, and America after the 1890s began to pay attention to botanical gardens. They considered botanical gardens as a representative and essential part of Western culture and attempted to introduce them in Korea as essential tools for academic development as well as for enlightenment. Although many Korean intellectuals' opinions about the necessity of a botanical garden did not actually lead to its construction during the open port period, such a movement was significant in that it strengthened the botanical garden's image as a symbol of civilization. Apart from tracing the origins of the botanical gardens in Korea, this study serves as fundamental research material for understanding the establishment of the Changgyeongwon Botanical Garden in 1909.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.233-249
• /
• 2002

The purpose of this study was to employing MRI in the estimation of the biomechanical body segment parameters of Korean adults. for this purpose MRI study on 19 Korean living subjects were used to measurement. All the parameters that was concerned were inertial characteristics of human body mass of each segment, center of mass of them and the length of radius of gyration of them. The cross sectional images and saggital images of every 1cm interval were got using the 0.5 Tesla MRI from the top of head to the bottom of foot, whole body. And then, by tracing the images of the film and scanning them, got the area which the several tissues occupied in the image of slice. By summing the area of slice of each segment which were calculating and by multipling the density of the tissues, got the mass of segment and other inertial characteristics. The ratios of radius of gyration in both transverse axis and longitudinal axis though the segmental mass and segment length are as follow: male A : head($0.229\pm0.0029$), neck($0.256\pm0.0095$), thorax($0.374\pm0.0059$) abdomen($0.245\pm0.0020$), pelvis($0.368\pm0.0106$), thigh($0.288\pm0.0030$) shank($0.280\pm0.0043$), foot($0.277\pm0.0195$), upperarm($0.311\pm0.0074$) forearm($0.286\pm0.0051$), hand($0.253\pm0.0095$) female A : head($0.214\pm0.0032$), neck($0.254\pm0.0112$), thorax($0.295\pm0.0061$) abdomen($0.289\pm0.0021$), pelvis($0.329\pm0.0108$), thigh($0.288\pm0.0036$) shank($0.280\pm0.0047$), foot($0.243\pm0.0206$), upperarm($0.279\pm0.0083$) forearm($0.286\pm0.0048$), hand($0.229\pm0.0097$) male B : head($0.532\pm0.0006$), neck($0.533\pm0.0006$), thorax($0.658\pm0.0008$) abdomen($1.350\pm0.0022$), pelvis($0.875\pm0.0002$), thigh($0.213\pm0.0001$) shank($0.160\pm0.0001$), foot($0.152\pm0.0002$), upperarm($0.136\pm0.0002$) forearm($0.202\pm0.0002$), hand($0.273\pm0.0006$) female B : head($0.198\pm0.0002$), neck($0.335\pm0.0011$), thorax($0.238\pm0.0001$) abdomen($0.888\pm0.0001$), pelvis($1.318\pm0.0117$), thigh($0.095\pm0.0001$) shank($0.075\pm0.0001$), foot($0.181\pm0.0006$), upperarm($0.0.062\pm0.0001$) forearm($0.083\pm0.0001$), hand($0.105\pm0.0007$).

• The korean journal of orthodontics
• /
• v.35 no.5 s.112
• /
• pp.398-407
• /
• 2005

The present study was conducted to examine the morphometrics and function of the disk on both sides among patients with facial asymmetry (FA) and to elucidate plausible correlations between internal derangement (ID) and FA. The sample was composed of 10 males and 27 females with FA. The disk status of all subjects was evaluated by bilateral high resolution magnetic resonance scans in the sagittal (closed and open) and coronal (closed) planes. Five types of disk displacement were identified accordingly. The disk function was diagnosed as normal disk function, disk displacement with reduction, and disk displacement without reduction. The disk shape on sagittal MRI in closed position was classified as bi-concave, biplanar, funnel/hemiconvex, and deformed. The disk position, translation and rotation were also measured. The difference between the shifted side and non-shifted side was analyzed by statistical analysis. Approximately $70\%$ of the patients in the present study showed unilateral or bilateral ID. It was found that anterior disk displacements (ADD), especially rotational ADD, occurred more frequently in the shifted side, while normal disk position was observed mainly in the non-shifted side (p<0.01). The disk of the shifted side showed significantly deformed configuration and inferior-anterior disk position. However, the disk of the non-deviated side showed hyper-mobility during jaw opening movement. These results demonstrate that in FA patients, the disks status of the shifted side is different from that of the non-shifted side, a phenomenon that could be correlated to facial asymmetry.

• The korean journal of orthodontics
• /
• v.39 no.5
• /
• pp.289-299
• /
• 2009

Objective: The purpose of the present study was to evaluate the effectiveness of the use of Head Posture Aligner (HPA) during cone-beam computed tomography (CBCT) scan in generation of frontal cephalograms using 3D CBCT images. Methods: CBCT scans and frontal cephalograms were made in 30 adult individuals. While a couple of CBCT scan was made for one subject, one was made with conventional method, without use of HPA, the other was acquired with the use of HPA. After creation of virtual frontal cephalogram from each 3D CBCT image, it was traced and compared with the tracing of real frontal cephalogram. Results: In the comparison of the measurements, the virtual cephalograms with the use of HPA did not show statistically significant differences with the real cephalograms whereas the virtual cephalograms without the use of HPA presented significant differences with real cephalograms in many measurements. In the correlation analysis with the measurements of the real cephalograms, the virtual cephalograms with the use of HPA showed higher correlations in all measurements than the virtual cephalograms without the use of HPA. Conclusions: Measurements from CBCT-generated cephalograms become similar to those from real cephalograms with the use of HPA during CBCT scan. Thus, the use of HPA is suggested during the CBCT scan in order to construct accurate virtual frontal cephalograms using 3D CBCT images.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.4
• /
• pp.344-351
• /
• 2009

Purpose: Optical imaging is providing great advance and improvement in genetic and molecular imaging of animals and humans. Optical imaging system consists of optical imaging devices, which carry out major function for monitoring, tracing, and imaging in most of molecular in-vivo researches. In bio-luminescent imaging, small animals containing luciferase gene locally irradiate light, and emitted photons transmitted through skin of the small animals are imaged by using a high sensitive charged coupled device (CCD) camera. In this paper, we introduced optical imaging system for the image acquisition of bio-luminescent signals emitted from small animals. Materials and Methods: In the system, Nikon lens and four LED light sources were mounted at the inside of a dark box. A cooled CCD camera equipped with a control module was used. Results: We tested the performance of the optical imaging system using effendorf tube and light emitting bacteria which injected intravenously into CT26 tumor bearing nude mouse. The performance of implemented optical imaging system for bio-luminescence imaging was demonstrated and the feasibility of the system in small animal imaging application was proved. Conclusion: We anticipate this system could be a useful tool for the molecular imaging of small animals adaptable for various experimental conditions in future.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.2 s.308
• /
• pp.21-32
• /
• 2006

The license plate recognition (LPR) unit consists of the following core components: plate region segmentation, individual character extraction, and character recognition. Out of the above three components, accuracy in the performance of plate region segmentation determines the overall recognition rate of the LPR unit. This paper proposes an algorithm for segmenting the license plate region on the front or rear of a vehicle in a fast and accurate manner. In the case of the proposed algorithm images are captured on the spot where unmanned monitoring of illegal parking and stowage is performed with a variety of roadway environments taken into account. As a means of enhancing the segmentation performance of the on-the-spot-captured images of license plate regions, the proposed algorithm uses a mathematical model for license plate colors to convert color images into digital data. In addition, this algorithm uses Gaussian smoothing and double threshold to eliminate image noises, one-pass boundary tracing to do region labeling, and MBR to determine license plate region candidates and extract individual characters from the determined license plate region candidates, thereby segmenting the license plate region on the front or rear of a vehicle through a verification process. This study contributed to addressing the inability of conventional techniques to segment the license plate region on the front or rear of a vehicle where the frame of the license plate is damaged, through processing images in a real-time manner, thereby allowing for the practical application of the proposed algorithm.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.45-52
• /
• 2014

The Ubiquitous-City (U-City) is a smart or intelligent city to satisfy human beings' desire to enjoy IT services with any device, anytime, anywhere. It is a future city model based on Internet of everything or things (IoE or IoT). It includes a lot of video cameras which are networked together. The networked video cameras support a lot of U-City services as one of the main input data together with sensors. They generate huge amount of video information, real big data for the U-City all the time. It is usually required that the U-City manipulates the big data in real-time. And it is not easy at all. Also, many times, it is required that the accumulated video data are analyzed to detect an event or find a figure among them. It requires a lot of computational power and usually takes a lot of time. Currently we can find researches which try to reduce the processing time of the big video data. Cloud computing can be a good solution to address this matter. There are many cloud computing methodologies which can be used to address the matter. MapReduce is an interesting and attractive methodology for it. It has many advantages and is getting popularity in many areas. Video cameras evolve day by day so that the resolution improves sharply. It leads to the exponential growth of the produced data by the networked video cameras. We are coping with real big data when we have to deal with video image data which are produced by the good quality video cameras. A video surveillance system was not useful until we find the cloud computing. But it is now being widely spread in U-Cities since we find some useful methodologies. Video data are unstructured data thus it is not easy to find a good research result of analyzing the data with MapReduce. This paper presents an analyzing system for the video surveillance system, which is a cloud-computing based video data management system. It is easy to deploy, flexible and reliable. It consists of the video manager, the video monitors, the storage for the video images, the storage client and streaming IN component. The "video monitor" for the video images consists of "video translater" and "protocol manager". The "storage" contains MapReduce analyzer. All components were designed according to the functional requirement of video surveillance system. The "streaming IN" component receives the video data from the networked video cameras and delivers them to the "storage client". It also manages the bottleneck of the network to smooth the data stream. The "storage client" receives the video data from the "streaming IN" component and stores them to the storage. It also helps other components to access the storage. The "video monitor" component transfers the video data by smoothly streaming and manages the protocol. The "video translator" sub-component enables users to manage the resolution, the codec and the frame rate of the video image. The "protocol" sub-component manages the Real Time Streaming Protocol (RTSP) and Real Time Messaging Protocol (RTMP). We use Hadoop Distributed File System(HDFS) for the storage of cloud computing. Hadoop stores the data in HDFS and provides the platform that can process data with simple MapReduce programming model. We suggest our own methodology to analyze the video images using MapReduce in this paper. That is, the workflow of video analysis is presented and detailed explanation is given in this paper. The performance evaluation was experiment and we found that our proposed system worked well. The performance evaluation results are presented in this paper with analysis. With our cluster system, we used compressed $1920{\times}1080(FHD)$ resolution video data, H.264 codec and HDFS as video storage. We measured the processing time according to the number of frame per mapper. Tracing the optimal splitting size of input data and the processing time according to the number of node, we found the linearity of the system performance.

• Investigative Magnetic Resonance Imaging
• /
• v.17 no.2
• /
• pp.110-122
• /
• 2013

Purpose : To compare the image quality and ligament traceability in ankle images obtained using Volume Isotropic Turbo Spin Echo Acquisition (VISTA) MRI with and without fat suppression. Materials and Methods: The signal-to-noise ratios (SNRs) in images from a phantom and from the ankle of a volunteer were compared. Ten ankles from 10 non-symptomatic volunteers were imaged for comparisons of contrast ratio (CR) and ligament traceability. All examinations were performed using VISTA sequences with and without fat suppression on a 3T MRI scanner. The SNRs were obtained from images with subjects and without subjects (noise-only). Contrast ratios from images of the 10 ankles were acquired between fluid and tendon (F-T), F-cartilage (C), F-ligament (L), fat (f)-T, f-C and f-L. Two musculoskeletal radiologists independently scored the traceability of 7 ligaments, in sagittal, axial and coronal images respectively, based on a 4-point scale (1 as not traceable through 4 as clearly traceable). The Wilcoxon signed-rank test was used to compare the CR. Fisher's exact test and Pearson's chi-squared test were used to compare the ligament traceability. Results: The SNRs did not differ significantly between the two sequences except in bone marrow. VISTA SPAIR showed the higher CR only in F-T (p = 0.04), whereas VISTA showed higher CR in f-T (p = 0.005), f-C (p = 0.005) and f-L (p = 0.005). The calcaneofibular ligament traceability with VISTA was superior to that obtained with VISTA SPAIR (p < 0.05) in all planes. Conclusion: VISTA showed significant superiority to VISTA SPAIR in tracing CFL due to the superior CR between fat and ligament.