• 한국해양공학회지
• /
• 제8권2호
• /
• pp.166-172
• /
• 1994

This paper presents an image processing method for two dimensional position measurement of a floating structure. This method is based on image processing technique using concept of window and threshold processing to track the target object. The experimental results for position measurement of the target object in two dimensional water tank demonstrate the validity of this method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.96-101
• /
• 2001

The development of a new experimental method is required to easily observe the growth behavior of fatigue cracks. To satisfy the requirement, an image processing technique was introduced to fatigue testing. The length of surface fatigue crack could be successfully measured by the image processing system. At first, the image data of cracks were stored into the computer while the cyclic loading was interrupted. After testing, crack length was determined using image processing software which was developed by ourselves. Block matching method was applied to the detection of surface fatigue cracks. By comparing the data measured by image processing system with the data measured by manual measurement with a microscope, the effectiveness of the image processing system was established. If the proposed method is used to monitor and observe the crack growth behavior automatically, the time and efforts for fatigue test could be dramatically reduced.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.110-113
• /
• 2003

In this paper, the multi-channel high speed data acquisition system is implemented. This high speed signal processing system for 3-D image display is applicable to the manipulation of a medical image processing, multimedia data and various fields of digital image processing. In order to convert the analog signal into digital one, A/D conversion circuit is designed. PCI interface method is designed and implemented, which is capable of transmission a large amount of data to computer. In order to, especially, channel extendibility of images acquisition, bus communication method is selected. By using this bus method, we can interface each module effectively. In this paper, 32-channel A/D conversion and PCI interface system for 3-dimensional and real-time display of the retina image is developed. The 32-channel image acquisition system and high speed data transmission system developed in this paper is applicable to not only medical image processing as 3-D representation of retina image but also various fields of industrial image processing in which the multi-point realtime image acquisition system is needed.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.329-333
• /
• 2005

This paper is concerned with the measurement of low-frequency vibrations of structures using the image processing method. To measure the vibrations visually, the measurement system consists of a camera, an image grabber board, and a computer. The specific target installed on the structure is used to calculate the vibration of structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the size of image. In this paper, we propose the methodology for the vibration measurement using the image processing method. The method enables us to measure the displacement directly without any contact. The current resolution of the vibration measurement is limited to sub centimeter scale. However, the frequency bandwidth and resolution can be enhanced by a high-speed and high-resolution image processing system.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.551-557
• /
• 1995

For the observation of treeing, a visual measurement with an optical microscope has been used to explain breakdown mechanism in high-voltage systems. The conventional directed visual method of tree aging observation is difficult to measure in short time processing, and it is impossible to analyze on tree degradation area, progressed direction, tree pattern, etc. By using an image processing technique, the tree features which appear immediately after the tree initiation as well as changes in the configuration of the tree can be easily measured and observed than using the conventional visual methods. In this paper, we have developed a tree observating system by using image processing for tree growth, degradation area and other treeing progress. As an experimental result, it can be concluded that the image processing method is a more effective alternative than directed visual observation method. As a matter of fact, it is possible to record the image of tree propagation immediately after its first appearance and explain the characteristics of tree growth froth the computer processing image.

• 한국가시화정보학회지
• /
• 제13권3호
• /
• pp.15-19
• /
• 2015

We developed a high-throughput microscopy (HTM) method which enabled us to replace a conventional phase contrast microscopy (PCM) method that has been used as a standard analytical method for airborne asbestos. We could obtain the concentration of airborne asbestos fibers under detection limit by automated image processing and analysis using HTM method. Here we propose an improved image processing algorithm with variable parameters to enhance the accuracy of the HTM analysis. Since the variable parameters that compensate the difference of the brightness are applied to the individual images in our new image processing method, it is possible to enhance the accuracy of the automatic image analysis method for sample slides with low asbestos concentration that caused errors in binary image processing. We demonstrated that enumeration of fibers by improved image processing algorithm remarkably enhanced the accuracy of HTM analysis in comparison with PCM. The improved HTM method can be a potential alternative to conventional PCM.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권1호
• /
• pp.56-62
• /
• 2004

This research attempts to suggest a detecting method for cutting position of an object using the neural network, which is one of intellectual methods, and the digital image processing method. The extraction method of object information using the image data obtained from the CCD camera as a replacement of traditional analog sensor thanks to the development of digital image processing. Accordingly, this research determines the threshold value in binary-coding of an input image with the help of image processing method and the neural network for the real-time gray-leveled input image in substitution for lighting; as a result, a specific position is detected from the processed binary-coded image and an actual system designed is suggested as an example.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.532-535
• /
• 2005

These days, many image processing techniques have been studied for effective image compression. Among those, 2D image filtering is widely used for 2D image processing. The 2D image filtering can be implemented by performing ID linear filtering separately in the direction of horizontal and vertical. Efficiency of image compression depends on what filtering method is used. Generally, circular convolution is widely used in the 2D image filtering for image processing. However it doesn't consider correlations at the region of image boundary, therefore filtering can not be performed effectively. To solve this problem. I proposed new convolution technique using Symmetric-Mirroring convolution, satisfying the 'alias-free' and 'error-free' requirement in the reconstructed image. This method could provide more effective performance than former compression methods. Because it used very high correlative data when performed at the boundary region. In this paper, pre-processing filtering in H.264 codec was adopted to analyze efficiency of proposed filtering technique, and the simulator developed by Matlab language was used to examine the performance of the proposed method.

• 한국인쇄학회지
• /
• 제22권1호
• /
• pp.9-18
• /
• 2004

Recently as color image processing to be become independent have been desired at the light source in an image processing and it have been enlarged. An image processing of the light source which is become independent means an image processing which uses a spectral reflectance information. We improved it in the spectral reflectance estimation method which uses existing 3-band image in this research that the improvement of an identity color population generation method which uses the hue angle and the processing speed improvement and introduces a labelling method. The precision of a spectral reflectance estimation appeared to the ${\Delta}E^*_{ab}$ of an average 2.7 comparing with the measurement price. The practical use possibility came to be fast and appeared a processing speed compared with existing method.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.751-754
• /
• 2009

This paper deals with the Cell-based distributed processing for generating free viewpoint images by merging multiple differently focused images. We previously proposed the method of generating free viewpoint images without any depth estimation. However, it is not so easy to realize real-time image reconstruction based on our previous method. In this paper, we discuss the method to reduce the processing time by dimension reduction for image filtering and Cell-based distributed processing. Especially, the method of high-speed image reconstruction by the Cell processor on SONY PLAYSTATION3(PS3) is described in detail. We show some experimental results by using real images and we discuss the possibility of real-time free viewpoint image reconstruction.