• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.83-83
• /
• 2000

Recently, Vision system has being used all around industry. Sensor systems are used for Mark Reader, for example, optical scanning is proximity sensor system, have many disadvantages, such as, lacking user interface and difficulty to store original specimens. In contrast with this, Vision systems for Mark Reader has many advantages, including function conversion to achieve other work, high accuracy, high speed, etc. In this thesis, we have researched the development of Mark Reader by using a Vision system. The processing course of this s)'stem is consist to Image Pre-Processing such as noise reduction, edge detection, threshold processing. And then, we have carried out camera calibration to calibrate images which are acquired from camera. After searching for reference point within scanning area(60pixe1${\times}$30pixe1), we have calculated points crossing by using line equations. And then, we decide to each ROI(region of interest) which are expressed by four points. Next we have converted absolute coordinate into relative coordinate for analysis a translation component. Finally we carry out Mark Reading with images classified by six patterns. As a result of experiment which follows the algorithm has proposed, we have get error within 0.5% from total image.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2003.05a
• /
• pp.42-43
• /
• 2003

• Archives of design research
• /
• v.14 no.4
• /
• pp.227-235
• /
• 2001

At present the educational envelopment of our country was placed in the difficult situation that cannot help but coping with the situation positively and actively against a lot of change and the crisis inside and outside. By employing the UI(university Identity) or CI(College Identity) for the communication method to overcome the above present situation and to take a triangular position again, those are recognized that making an effort to amend or re-generate the present images is important in the management of college. But UI or CI are upright and have strong feeling on the specific character of college which is called as educational organization. And in its application, it shows weak point that cannot scope softly against the changing current of times by lack of adaptability. By congesting the restriction of conveyance of image and upright nature of such operation, and also by developing the Image Mark that can convey variety, affection and polished feeling, and further by conveying the future-oriented images aimed by college to the educational consumers closely and softly, it is to take the roils faithfully for the strengthening of competitive power of college. In addition, in order to convey college image softly and effectively and also utilize as a means of positive propaganda, character was developed together.

• Journal of Intelligence and Information Systems
• /
• v.7 no.2
• /
• pp.129-141
• /
• 2001

Kansei engineering or image technology is a tool to analyze relation between product design components and the impression or feeling of human for physical products. This paper attempts to construct the designer\`s aid tool for developing corporate identity(CI) symbol mark based on the hybrid Kansei engineering. It combines the forward Kansei engineering for translating consumer\`s feeling into design components of CI symbol mark and the backward Kansei engineering for evaluating consumer\`s feeling for CI symbol mark. The semantic differential(SD) evaluation experiment is carried out to find the relations between image and design. The backward Kansei engineering system is modelled by fuzzy neural network. This research is expected to contribute to the development of CI symbol mark that correspond to comsumer\`s image.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.377-382
• /
• 2003

We propose a new optical watermarking method, which can protect the copyright of digital data, using a binary phase hologram and a Mach-Zehnder interferometer. Using a simulated annealing algorithm, the binary phase hologram of the mark image to be hidden is designed. We obtained a watermarked image by linearly superposing the hologram, which is the watermark, in the original image. The extraction processing of the mark image from the watermarked image is achieved by placing the phase-modulated watermarked image on a LCD in one path and the phase-modulated original image on another LCD in the other path in the Mach-Zehnder interferometer. The mark image was obtained by inverse Fourier transforming the phase modulated interference intensity. We confirmed that the proposed method is robust for the cropped images through computer simulation, and we implemented it optically using LCDs which are phase modulation devices.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.2
• /
• pp.115-120
• /
• 2009

Description in this paper is a system for new range measurement method between an aircraft and runway with circular mark in landing runway. The system includes an altimeter and a camera installed on the aircraft, and a circular mark placed on a landing runway. The camera installed on the aircraft must be oriented toward in front of the aircraft, and configured to detect the shape of the circular mark in image information form and a flight control computer configured to calculate the angle between the aircraft and the ground, the ground range between the aircraft and the circular mark, and the slant range between the aircraft and the circular mark with the altitude information measured by the altimeter. This system configured to control the automatic landing of the aircraft with this information.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1358-1367
• /
• 1993

In this paper, OMR system based on image processing is developed which improve the performance of conventional OMR system based on line-scan method. Based on this OMR system, real-time OCR system which recognizes alphanumerics is also developed. We propose the OMCR system which recognize the mark and numerals at the same time. Besides, we improve the input system using constrained 7-segment type handwritten numeral instead of mark to solve the problem caused by miswriting the mark. In summary, we verified the reai-time recognition performance of developed OMCR system using application form for admission, answer sheet for college entrance examination and receipt sheet.

• The Journal of the Korea Contents Association
• /
• v.18 no.9
• /
• pp.482-497
• /
• 2018

This study would investigate the impacts of coffee shop companies' mecenat activity on identification, corporate image, love mark and loyalty. For sampling, an investigator who visited the coffee shops in person conducted surveys with customers. 800 copies were distributed for 11 days from May 23 through June 2, 2018, and excluding unreliable questionnaires from the collected questionnaires, 711 copies were used in the final analysis. As a result of the analysis, it turned out that the higher social contribution, purity, public interest and preference, the higher identification became. Also, the higher social contribution, public interest and preference, the higher corporate image became. On the other hand, it turned out that purity had a negative (-) impact on the corporate image. It turned out that purity and preference had positive impacts on the love mark, while did not affect social contribution, while public interest had a negative (-) impact on that. It turned out that identification had a positive impact on the corporate image, and identification and corporate image had positive impacts on the love mark. Also, identification, corporate image and love mark had positive impacts on loyalty. It is expected that the above research result would provide practical implications for coffee shop companies' marketing techniques in the future, and further, it is judged that it would play a positive role in the quality of life of consumers who experience coffee shop companies' mecenat activity.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.84-93
• /
• 2015

This study is for the development of Cover Glass Grinding Processing System. This system is developed for manufacturing a mass product system grinding cover glasses with highly precise mechanism, and we improved resulted quality. In the development process, we developed a complete process technology through mechanical design, image processing technology, spindle control, mark identification algorithm etc. With this cover glass grinding development, we could developed process technology, image processing technology, organization mechanisms and control algorithms.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2003.05a
• /
• pp.40-41
• /
• 2003