• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.383-388
• /
• 2019

High purity SiC fine powder with metal impurity contents of less than 1 ppm was synthesized by improved carbothermal reduction process, and the synthesized powder was used for SiC single crystal growth in RF heating PVT device at temperature above 2,100℃. In-situ x-ray image analyzer was used to observe the sublimation of the powder and single crystal growth behavior during the growth process. SiC powder was used as a source of single crystal growth, exhausted from the outside of the graphite crucible at the growth temperature and left graphite residues. During the growth, the flow of raw materials was concentrated in the middle and influenced the growth behavior of SiC single crystals. This is due to the difference in temperature distribution inside the crucible due to the fine powder. After the single crystal growth was completed, the single crystal ingot was cut into a 1 mm thick single crystal substrate and finely polished using a diamond abrasive slurry. A dark yellow 4H-SiC was observed overall of single crystal substrate, and the polycrystals generated in the outer part may be caused by the incorporation of impurities such as the bubble layer mixed in the process of attaching the seed crystal to the seed holder.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.185-196
• /
• 1997

By considering the definition and application of resolution as well as the concept and theory of SAR, the essential contents of the SAR design and analysis are described. This paper is to compare and analyze the resolution performance capability of three techniques for achieving azimuth resolution such as the real aperture, the unfocused and the focused techniques, through the simulation. Simulation is performed to make the restricted conditions for the unfocused technique that can be implemented by the less commputing load of signal processingand the lower cost. Through the mission analysis, the use of SAR image can be applied for estimation of whole situation at the regional area in the field of military demands for tactical purpose as well as civilian demands for the damage of disaster. RPV and sall or medium aircraft are selected to carry the SAR for these purposes and the proper resolution turns ou 5~15 m. The trade-off study of variables through the simulations results in the proper conditions such that range is less 3, 000 m, Wavelength is 1~10 m, and the raw signals and results processed by three techniques for two point targets are exhibited undr such conditions. Therefore, at some points, the result of this paper si proposed for useful applications of unforcused technique in the restricted conditions except the identification of the small target at a long range re- quired for high resolution.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.2
• /
• pp.137-153
• /
• 2019

This study reviewed the Technology & Home Economics Education textbooks to examine if their illustrations would be appropriate for students' balanced view of gender. To this end, the textbooks of 'Technology & Home Economics Education 1 and 2' from 12 publishers (24 books in total) were analyzed focusing on the formative and content characteristics of illustrations in the textbooks. The results of this study is as follows. There were areas in the textbooks that may not be considered gender-equal. Although the textbooks have been improved to some extent from the previous versions, they still show gender stereotypes biased towards men. If students are constantly exposed to the prescriptive characteristics that are in favor of certain gender, they would find it difficult to develop their personality strengths, due to the gender role pressures. In order to help students cultivate sensitivity and activism toward the gender equality issues, it is important that the textbooks are gender-equal. To summarize, in order to suggest to students a balanced image of society with male and female cooperating with each other in diverse domains, it is deemed necessary to constantly examine and revise the textbooks for their gender stereotypic contents, and thereby, improve them for gender equality.

• Convergence Security Journal
• /
• v.13 no.3
• /
• pp.9-15
• /
• 2013

Calculating of matching cost is an important for efficient stereo matching. To investigate the performance of matching process, the concepts of the existing methods are introduced. Also we analyze the performance and merits of them. The simplest matching costs assume constant intensities at matching image locations. We consider matching cost functions which can be distinguished between pixel-based and window-based approaches. The Pixel-based approach includes absolute differences (AD) and sampling-intensitive absolute differences (BT). The window-based approach includes the sum of the absolute differences, the sum of squared differences, the normalized cross-correlation, zero-mean normalized cross-correlation, census transform, and the absolute differences census transform (AD-Census). We evaluate matching cost functions in terms of accuracy and time complexity. In terms of the accuracy, AD-Census method shows the lowest matching error ratio (the best solution). The ZNCC method shows the lowest matching error ratio in non-occlusion and all evaluation part. But it performs high matching error ratio at the discontinuities evaluation part due to blurring effect in the boundary. The pixel-based AD method shows a low complexity in terms of time complexity.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.339-349
• /
• 2011

IBDI (Internal Bit Depth Increase) is able to significantly improve the coding efficiency of high definition video compression by increasing the bit depth (or precision) of internal arithmetic operation. However the scheme also increases required internal memory for storing decoded reference frames and this can be significant for higher definition of video contents. So, the reference frame memory compression method is proposed to reduce such internal memory requirement. The reference memory compression is performed on 4x4 block called the processing unit to compress the decoded image using the correlation of nearby pixel values. This method has successively reduced the reference frame memory while preserving the coding efficiency of IBDI. However, additional information of each processing unit has to be stored also in internal memory, the amount of additional information could be a limitation of the effectiveness of memory compression scheme. To relax this limitation of previous memory compression scheme, we propose a selective merging-based reference frame memory compression algorithm, dramatically reducing the amount of additional information. Simulation results show that the proposed algorithm provides much smaller overhead than that of the previous algorithm while keeping the coding efficiency of IBDI.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.123-129
• /
• 2016

This study is conducted to estimate the firing temperature and condition of the 4-6th Century earthenwares excavated from the ancient tombs in the Seonggok-ri, Cheongdo through mineralogical approaches, and to contrast to the characteristics of the earthenware from the Changnyeong the adjacent area to the Cheongdo. The Cheongdo earthenware was mainly composed of quartz, pores and vitric matrix with minor parts of feldspars, felsic volcanic fragments and opaque minerals, of which quartz crystals frequently show embayed texture and pores was partly filled with amorphous quartz. Mullite, hematite and cristobalite were found by XRD spectrometer additionally, and in the SEM image the Mullite contents are evenly distributed from the central part to the marginal part. As a result, the firing temperature of the Cheongdo earthenware could be 1,100 to $1,200^{\circ}C$, which is higher than that of the Changnyeong. Distribution characteristics of mullite in the Cheongdo and the Changnyeong earthenware indicate that the Cheongdo earthenware was under the longer firing time or more homogeneous thermal condition in the kiln than the Changnyeong.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.525-534
• /
• 2014

Environmental problems typically occurring in abandoned mine lands (AML) include: contaminated and acidic surface water and groundwater; stockpiled waste rock and mill tailings; and ground subsidences due to mining operations. This study examines the effectiveness of various geophysical techniques for mapping potential hazard and contaminated zones. Four AML sites with sedimentation contamination problems, acid mine drainage (AMD) channels, ground subsidence, manmade liner leakage, and buried mine tailings, were selected to examine the applicability of various geophysical methods to the identification of the different types of mine hazards. Geophysical results were correlated to borehole data (core samples, well logs, tomographic profiles, etc.) and water sample data (pH, electrical conductivity (EC), and heavy metal contents). Zones of low electrical resistivity (ER) corresponded to areas contaminated by heavy metals, especially contamination by Cu, Pb, and Zn. The main pathways of AMD leachate were successfully mapped using ER methods (low anomaly peaks), self-potential (SP) curves (negative peaks), and ground penetrating radar (GPR) at shallow penetration depths. Mine cavities were well located based on composite interpretations of ER, seismic tomography, and well-log records; mine cavity locations were also observed in drill core data and using borehole image processing systems (BIPS). Damaged zones in buried manmade liners (used to block descending leachate) were precisely detected by ER mapping, and buried rock waste and tailings piles were characterized by low-velocity zones in seismic refraction data and high-resistivity zones in the ER data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.911-915
• /
• 2007

영상측정기법을 적용하여 경제적이고 효율적인 유속 측정 방법에 대하여 많은 연구들이 진행되어 왔다. 현재 이동식 LSPIV 시스템은 실험실의 수리모형실험과 현장의 국부적인 유속측정에 효율적으로 이용되고 있지만, 고정식 LSPIV 시스템의 적용에는 많은 문제점들이 있어서 현장 적용이 미루어져왔다. 고정식 LSPIV 시스템은 수문분석에 많이 의존하고 있는 현재의 홍수량 산정에 좀 더 정확한 유속과 수위를 동시에 고려할 수 있는 하천유량측정 시스템이다. 이는 과거 하천유량측정 시 많은 비용과 인력 그리고 위험성들을 대폭 줄일 수 있는 현장 모니터링 시스템의 구축을 가능하게 해줄 수 있다. 본 연구에서는 LSPIV (Large Scale Particle Image Velocimetry) 시스템을 탄천(대곡교)에 설치하여 연속적으로 유량 측정을 하였다. 탄천(대곡교)에 적용된 고정식 LSPIV 시스템은 유속측정을 위한 디지털 카메라 2대와 컴퓨터 그리고 수위 측정을 위한 DCU1104 초음파 수위계로 구성된다. 위의 현장 장비들에서 들어온 실시간 영상과 수위자료는 CDMA 무선통신을 이용하여 서버컴퓨터로 들어와서 인터넷에서 손쉽게 받아 볼 수 있다. 이와 같이 실시간으로 들어온 입력 자료는 LSPIV 프로그램을 이용하여 언제 어디에서나 비교적 정확한 유량을 산정할 수 있다. 또한 실시간으로 들어오는 하천 영상을 통해 실시간 현장 모니터링도 가능하게 되고 시간적으로 연속적인 영상을 얻을 수 있기 때문에 하천 유량 변화를 쉽게 알 수 있다. 따라서 과거 현장에서 어렵게 측정하여 얻을 수 있던 유속자료를 간단한 실시간 영상 분석만으로 구할 수 있으므로 앞으로 유량조사에 유용하게 활용될 수 있을 것이다. 입체 영상) 입체영상은 영화에서 시작되었으나, 20c후반기에 들어서면서 애니메이션 분야와 모바일, 광고 패널, 텔레비전등의 매체를 이용한 입체 영상의 개발로 인하여 특정 분야에 한정 시킬 수 없으므로 영상으로 칭한다. 입체 영상은 21c에 들어서면서 영상매체의 한 분야로 급부상하고 있다. 1900년 무렵부터 연구된 입체영화(3-Dimensional motion Picture)는 In여 년이 지난 지금 대중화를 눈앞에 두고 있다. 국내에서는 놀이 동산이나 박물관등에서 흔히 볼 수 있다. 하지만 앞으로는 HDW등의 대중화로 화질의 발전을 이룬 텔레비전 분야 등에서 실용화 될 전망이다. 국제적인 흐름과 함께 국내에서도 입체 영화에 대한 연구가 활성화 되어 영상산업의 한 주류로서 대두되고 있다. 이러한 상황에서 입체영상에 대한 이해와 콘텐츠(Contents)의 개발은 기술적인 진보에 발맞추어 준비되어야 한다. 본 논문은 이러한 기술적인 계보에 발맞춘 영상 콘텐츠 개발에 박차를 가하고자 앞으로의 발전분야에 대한 기술적인 면과 기법적인 면을 제시하여 기술만 앞서고 내용은 수입하는 수입국이기 보다는 미리 준비하여 비전문가나 타국의 기술에 선점 당하지 않는 분야로 성장할 수 있는 진보적인 영상 인들의 관심과 지속적인 연구를 독려하고자 한다.시민의 휴식 및 여가선용 공간으로 활용하기 위한 사업의 기초자료로 활용되며 이미 설계검토가 시작되었다. 본 연구결과는 유수지 및 저수지의 환경개선 사업의 선두적인 성공사례로 국내 타 지역의 유사한 사업에 있어 벤치마킹을 할 수 있는 훌륭한 사례가 될 것이다.요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸림돌이 되었다. 둘째, 동

• Archives of design research
• /
• v.15 no.1
• /
• pp.59-67
• /
• 2002

In accordance with the fast changing circumstance, universities are now reaching, beyond the education place of simple delivery of knowledge and exchange of information, to a place of developing a specialty program related with the region and industry to achieve a competitive edge in education. Through these academic-industrial collaboration program, special knowledge and human resources in the university are utilized in the society and it may contribute to the development of industry and breed of career people based upon the real job site can be achieved. In addition, through the practical operation of such developed program, university may contribute to the enhancement of the competitiveness of the corporation to the activation and acceleration of the regional economy and finally to the enhancement of competitiveness of national industry in international level. This study tries to develop 3 technical instruction and support program related with the legion and industry which may conform to the ideals of university and its goal of education and can provide a platform for the education that is closely related with the regional industry and real job site iud may cope actively with the upcoming knowledge society and fast changing regional circumstances. This study will make research and analyze needs of design support from the industry in order to develop a academic-industrial cooperative design support program for the furniture industry which conforms to the regional characteristic and feature and develop and present contents of program in three area of development of furniture design technology, build-up of furniture design information system and establishment of order based education system. The proposed program is supposed to be operated practically and effectively and contribute to the development of new product, to enhancement of company image and finally to the maximization of corporate profit. Also this study is epected to be used as an important material for establishment of order-based education system which confirms to the job site needs that may be analysed from feedback of product results and for practical learning.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.137-143
• /
• 2014

Recently, as new paradigm for government operation called government 3.0, government is actively operating policy opening and sharing public data. In addition, the Ministry of Land are operating an open platform integrated map service (the VWorld) which provides a variety of video contents such as the country's national spatial information, traffic information and three-dimensional building for the public. According to W3C Foundation's Open Data Status Report(2013), our country has the evaluated results that the part of the government's policy support and planning is good while the part of the data management is vulnerable. So our country needs the quality improvement for the data management. In addition, a digital aerial photograph image data is required to be up-to-date for the three-dimensional spatial object data. In this paper, we present the method for enhancement of the accuracy of vertical position and for maintainment of up-to-date vertical position. Our methods evaluate the data quality and analyze the cause of error of measurement utilizing the national standard quality assessment method. The result of research shows that the accuracy of vertical position is improved if the height of the building captain is adjusted by the quality assessment values and a three-dimensional model has up-to-date data if reconstruction and extension information of construction register is utilized.