• 대한임상전기생리학회지
• /
• 제5권2호
• /
• pp.73-84
• /
• 2007

This study aims to examine changes from differences in the lumbar scoliosis angle and iliac crest height due to abnormal and habitual posture shown in unilateral weight load at standing posture and suggest data for preventing and treating lumbago. The subjects of this study are 16 lumbago patients between twenties and forties with chronic lumbago over six months, but without neurological symptoms. As a result of photographing front and back with three conditions such as weight load on both sides and left or right unilateral weight load posture in order to examine changes of lumbar scoliosis and iliac crest according to changes of posture at unilateral weight load, while scoliosis angle and iliac crest height by habitual unilateral support were increased, those by opposite support were decreased. In conclusion, it was found that habitual unilateral weight load may cause continuous distortion of spinal angle and change of iliac crest height and these may be a factor of lumbago. Therefore, if habitual unilateral weight load state is kept continuously, distortion of lumbar angle and iliac crest height may be greater and common efforts to change habitual unilateral weight load are needed.

• Journal of Korean Neurosurgical Society
• /
• 제66권6호
• /
• pp.703-715
• /
• 2023

Objective : This retrospective study investigated the factors that affect cage obliquity angle despite orthogonal maneuvers performed during oblique lateral interbody fusion (OLIF) and assessed the relationship between cage obliquity angle and radiological outcomes post-surgery. Methods : Twenty-nine males who underwent L4-L5 OLIF for lumbar degenerative disease between 2019 and 2021 with a followup duration greater than 12 months were analyzed. Radiological parameters were measured including psoas muscle volume, total psoas area index (total psoas muscle area [cm²]/height squared [m²]), distance from the iliac artery to the origin of the psoas muscle (DIAPM), angle between the origin of the psoas muscle and the center of the vertebral disc (APCVD), iliac crest height, disc height, lumbar flexibility (lumbar flexion angle minus extension angle), cage location ratio, cage-induced segmental lumbar lordosis (LL) (postoperative index level segmental LL minus used cage angle), foraminal height changes, fusion grade. Results : DIAPM, APCVD, iliac crest height, postoperative index level segmental LL, and cage-induced segmental LL were significantly correlated with OLIF cage obliquity angle. However, other radiological parameters did not correlate with cage obliquity. Based on multiple regression analysis, the predictive equation for the OLIF cage obliquity angle was 13.062-0.318×DIAPM+0.325×1APCVD+0.174×iliac crest height. The greater the cage obliquity, the smaller the segmental LL compared to the cage angle used. Conclusion : At the L4-L5 level, OLIF cage obliquity was affected by DIAPM, APCVD, and iliac crest height, and as the cage obliquity angle increases, LL agnle achievable by the used cage could not be obtained.

• 대한치과의사협회지
• /
• 제49권9호
• /
• pp.520-526
• /
• 2011

Vascularized iliac crest flap include bone tissue of good quality and quantity for mandible segmental defect. Even if fibular flap can contain longer bone tissue, iliac crest has esthetic shape for mandible body reconstruction and large height for implant. Conventional vascularized iliac crest osteomyocutaneous flap is too bulky for reconstruction of intraoral soft tissue defect. But modified flap can reduce soft tissue volume, so is good for functional reconstruction of oral mucosa. It takes only one month for completely replace oral mucosa. The final mucosal texture is much better than other skin paddle flap, especially for implant prosthesis. Donor site morbidity of this method looks same level or less with other modalities functionally and socially. In case of oral mucosa-mandible combined defect, vascularized iliac crest with internal oblique muscle flap shows good outcomes for hard and soft tissue.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권8호
• /
• pp.4137-4140
• /
• 2012

The authors present five cases of combined oral mucosa-mandible defects reconstructed with the vascularized internal oblique-iliac crest myoosseous free flap. This technique has many advantages compared to other conventional methods such as the radial flap, scapula flap, and fibula flap. Vascularized iliac crest flaps provide sufficient high-quality bone suitable for reconstructing segmental madibular defects. Although fibular flaps allow longer donor bone tissue to be harvested, the iliac crest can provide an esthetic shape for mandibular body reconstruction and also provides sufficient bone height for dental implants. Conventional vascularized iliac crest myoosseous flaps have excessive soft tissue bulk for reconstruction of intraoral soft tissue defects. The modification discussed in the present article can reduce soft tissue volume, resulting in better functional reconstruction of the oral mucosa. Another advantage is that complete replacement of the oral mucosa is observed in as early as one month post-operation. The final mucosal texture is much better than that obtained with other skin paddle flaps, which is especially beneficial for the placement of dental implant prostheses. Donor site morbidity looks to be similar to, if not less than that observed for other modalities in terms of function and esthetics. For combined oral mucosa-mandible defects, the vascularized internal oblique-iliac crest myoosseous free flap shows good results with respect to hard and soft tissue reconstruction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권6호
• /
• pp.570-578
• /
• 2006

A severely atrophic maxilla may disturb the proper implant placement. The various bone graft techniques are required for simultaneous or delayed implantation in the cases of atrophic alveolar ridges. We present 11 consecutive patients treated with simultaneous implantation using the autogenous inlay and/or onlay bone grafts from iliac crest to the floor of the maxillary sinus and the alveolar crest. In the cases of atrophic maxilla, a total 69 implants were simultaneously placed with autogenous iliac bone graft. 40 fixtures were inserted in the sinus floor simultaneously with subantral block bone graft, the other 29 fixtures were placed in the anterior or premolar areas with block or particulate bone graft. The vertical alveolar bone height was measured with Dental CT at the preoperation and 6 months postoperation. Moreover, the implant stability quotients (ISQ) were measured by $Osstell^{TM}$ during second implant surgery at 6 months later of first implantation. All implants were obtained successful osseointegration with the grafted bone. The mean vertical increases were 3.9mm in the anterior ridges and 12.8mm in the posterior ridges. During the second implant surgery, mean ISQ were 62.95 in the anterior ridge and 61.32 in the posterior ridge. We concluded that the simultaneous implantation with autogenous iliac bone graft were stable and available methods for severely atrophic maxilla.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권1호
• /
• pp.85-92
• /
• 2005

Reconstruction of defect in the anterior part of the maxilla to enable implant placement or prothesis is a complicated treatment due to the anatomical position and lack of soft tissues. Two cases are presented in which autogenous iliac PMCB(particulate marrow and cancellous bone) with titanium mesh were used for premaxilla reconstruction and alveolar bone repair of the anterior maxillas prior to denture and implants fixation respectively. Cancellous bone from the anterior iliac crest was compressed and placed against a titanium mesh fixed to the bone of palate in a patient with severe defect of the anterior maxilla. There were no problem in the healing, and the anterior maxillas of two patients had increased height and width during the initial healing and remodeling. The clinical reports describe the use of titanium mesh for reconstruction of premaxilla. Autogenous bone grafts were harvested from the iliac crest and were loaded on a titanium mesh that were left in the patient's maxilla for 6 months before they were removed respectively. The radiographic analysis demonstrated that a 10mm vertical ridge augmentation had been achieved. In guided bone regeneration, the quantity of bone regenerated under the barrier has been demonstrated to be directly related to the amount of the space under the membrane. This space can diminish as a result of membrane collapse. To avoid this problem which involved the use of a titanium mesh barrier to protect the regenerating tissues and to achieve a rigid fixation of the bone segments, were used in association with autologous bone in 2 cases. The aim of this study was to evaluate the capability of a configured titanium mesh to serve as a mechanical and biologic device for restoring a vertically defected premaxilla.

• Journal of Korean Neurosurgical Society
• /
• 제60권2호
• /
• pp.211-219
• /
• 2017

Objective : This study aimed to compare the clinical and radiologic outcomes of patients with subaxial cervical injury who underwent anterior cervical discectomy and fusion (ACDF) with autologous iliac bone graft or polyetheretherketone (PEEK) cages using demineralized bone matrix (DBM). Methods : From January 2005 to December 2010, 70 patients who underwent one-level ACDF with plate fixation for post-traumatic subaxial cervical spinal injury in a single institution were retrospectively investigated. Autologous iliac crest grafts were used in 33 patients (Group I), whereas 37 patients underwent ACDF using a PEEK cage filled with DBM (Group II). Plain radiographs were used to assess bone fusion, interbody height (IBH), segmental angle (SA), overall cervical sagittal alignment (CSA, C2-7 angle), and development of adjacent segmental degeneration (ASD). Clinical outcome was assessed using a visual analog scale (VAS) for pain and Frankel grade. Results : The mean follow-up duration for patients in Group I and Group II was 28.9 and 25.4 months, respectively. All patients from both groups achieved solid fusion during the follow-up period. The IBH and SA of the fused segment and CSA in Group II were better maintained during the follow-up period. Nine patients in Group I and two patients in Group II developed radiologic ASD. There were no statistically significant differences in the VAS score and Frankel grade between the groups. Conclusion : This study showed that PEEK cage filled with DBM, and plate fixation is at least as safe and effective as ACDF using autograft, with good maintenance of cervical alignment. With advantages such as no donor site morbidity and no graft-related complications, PEEK cage filled with DBM, and plate fixation provide a promising surgical option for treating traumatic subaxial cervical spine injuries.

• 한방재활의학과학회지
• /
• 제27권3호
• /
• pp.125-136
• /
• 2017

Objectives The present study was designed to analyze the posture pattern of healthy right-handed male and to investigate the effect of Chuna treatment. Methods Twenty healthy right-handed male were selected in this study. Body posture was measured by Body $Style^{(R)}$. After that, subjects received Chuna treatment on lumbar and pelvis area. Finally, the 2nd measurement was carried out. Results In shoulder height, left shoulder was higher than right one. In pelvic height, right iliac crest was higher than left, followed by longer right leg than left. In lower limb angle suggesting valgus or varus knee. In height of scapula inferior angle, right seemed higher than left. After the Chuna treatment, shoulder height, pelvic height, and leg length difference showed significant improvement. Other variables showed improvement but it was not significant. Conclusions These results suggest that right-handed male have some characteristic posture pattern because of their daily life habits, and Chuna treatment can be effective in correcting bad posture.

• 대한물리의학회지
• /
• 제18권3호
• /
• pp.113-119
• /
• 2023

PURPOSE: This study aimed to determine the effects of using a smartphone in the sitting position on the pelvic posture and the low back pressure pain threshold (PPT). METHODS: Thirty participants (15 women and 15 men) were recruited for this study. The participants were asked to sit in a normal sitting position without using a smartphone, followed by sitting while watching a video using a smartphone. The pelvic posture was measured using the back range of motion II (BROM II) device and a palpation meter. We measured PPT using the digital pressure algometer. RESULTS: Pelvic posterior tilting was significantly greater when sitting while using a smartphone relative to sitting without using a smartphone (p < .05). There was no significant difference in the height of the iliac crest when sitting while using a smartphone compared to sitting without using a smartphone (p > .05). The PPTs of L1, L3, and L5 were significantly lower when sitting while using a smartphone relative to sitting without using a smartphone (p < .05). CONCLUSION: Based on these results, it can be concluded that frequent smartphone use while sitting may potentially increase the risk of developing low back problems.

• 대한한방소아과학회지
• /
• 제31권4호
• /
• pp.31-38
• /
• 2017

Objectives The purpose of this study was to find out the clinically reliable relationships between the Risser sign and chronological age, bone age, menarche, and adult height prediction (AHP) and to evidence the reliability of the Risser sign. Methods This study had been carried out with 50 children who had their growth checked in an oriental medical hospital from January 2015 to February 2017. We investigated Risser sign in AP X-rays with iliac crest, bone age, AHP for all 50 children and the timing of menarche from the 22 girls in the study subjects. We also investigated a correlation between the Risser stage and the other indicators to analyze statistical data. Results The mean chronological ages of Risser 1, 2, 3 and 4 were 11.2, 12.6, 14.4, and 15.5 years respectively for the boys and 10.8, 12.2, 13.8 and 14.8 years respectively for the girls. The mean bone ages of Risser 1, 2, 3 and 4 were 12.3, 13.6, 15.7 and 16.5 years respectively for the boys and 11.7, 13.8, 14.3 and 14.9 years respectively for the girls. We analyzed 22 girls' Risser stages in accordance with the duration from menarche. The result showed that in the first six months after menarche, all girls were in Risser 1 and 2; in the next six months, the girls were in Risser 2 on average; in the next 12 months, all girls were in Risser 3 and 4; after more than two years from menarche, all girls were in Risser 4. The mean remaining growth height of Risser 1, 2, 3 and 4 were 27.8, 17.3, 4.4 and 1.0 cm respectively for the boys and 14.5, 5.1, 3.1 and 1.1 cm respectively for the girls. The Risser stage was correlated strongly with chronological age (Spearman's rho=0.707 (boy), 0.841 (girl)), bone age (Spearman's rho=0.869 (boy), 0.875 (girl)), duration from menarche (Spearman's rho=0.909) and remaining growth height (Spearman's rho=-0.784 (boy), -0.878 (girl)). Conclusions This study showed that the Risser sign can be useful in assessing skeletal maturity and predicting remaining growth height based on the Risser stage and the other growth indicators.