• 제목/요약/키워드: Ignition Failure

검색결과 35건 처리시간 0.018초

온도차 변동에 따른 전자밸브 작동모델 실험적 연구 (Experiment Study on Operation Model of Automatic Cylinder Valve by the Temperature Differences)

  • 장갑만;엄석화;김인찬;김청균
    • 한국가스학회지
    • /
    • 제16권6호
    • /
    • pp.73-79
    • /
    • 2012
  • 현재 국내의 모든 CNG자동차에는 용기용 밸브로 수동밸브가 부착되어 있으며 가스누출 사고 시 운전자가 차량을 정지하고 수동밸브를 잠궈야 하는 불편한 점이 있어 누출 사고 시에는 운전자 등이 가스누출사고를 대응하는데 어려운 부분이 있다. 유럽의 선진국에서는 가스누출 시 운전자가 시동을 끄면 자동으로 닫히는 구조를 가진 전자밸브의 장착을 의무화 하고 있어 우리나라에서도 기능성이 증가된 전자식 용기밸브를 적용하는 것이 CNG 버스의 안전성을 향상 시킬 수 있는 좋은 기회일 것이다. 본 논문에서는 개개의 전자밸브의 작동상태를 운전자가 파악하기 어려운 구조적인 문제를 보완하기 위해서 충전 중 압력의 상승에 따라서 온도가 상승하는 현상에 착안하여 문제에 접근하였다. 충전 중 온도상승이 압력차에 따라서 약 $30^{\circ}C$ 이상이 발생하는 것을 이용하여, 데이터 확인 시 온도상승이 발생하지 않는 용기는 밸브가 작동하지 않아 충전이 이루어지지 않는 것으로 판단할 수 있는 실험적 결론을 얻었다.

Zr과 ZrNi로 구성된 고체연료의 노화 연구 Part 1: 열/화학/분광학적 분석 (Aging of Solid Fuels Composed of Zr and ZrNi Part 1: Thermal/Chemical/Spectroscopic Analysis)

  • 한병헌;류지훈;양준호;오주영;;여재익
    • 한국추진공학회지
    • /
    • 제24권2호
    • /
    • pp.1-13
    • /
    • 2020
  • Zr을 원료로하는 점화제와 ZrNi를 원료로 하는 지연제로 구성된 파이로테크닉스의 노화현상을 열적/화학적/광학적으로 분석하였다. 열적 분석에는 Differential Scanning Calorimetry (DSC) 와 Thermogravimetry Analysis(TGA)를 통해 열 기반의 반응식을 규명했다. DSC의 결과로 수행한 픽 분석기법 (peak deconvolution)을 통해 각 연료의 노화에 따른 열적 변화를 분석하였다. 화학종 변화 분석에는 Laser Induced Breakdown Spectroscopy (LIBS)와 X-ray Photoelectron Spectroscopy (XPS)를 사용하였다. 수분에 의한 산화제의 분해가 연료의 노화에 크게 영향을 미쳤으며, 열에너지 감소의 원인은 연료 표면의 산화막 형성과 산화금속의 형성으로 나타났다.

현장 소방활동 중 소방공무원 화상사고 사례 분석 연구 (Case Studies of Firefighter Burns Safety Accident during Fire-fighting Activities)

  • 최신웅;이소연
    • 한국안전학회지
    • /
    • 제37권6호
    • /
    • pp.136-147
    • /
    • 2022
  • The purpose of this study is to analyze four cases of firefighter burns in various fire scenes and to find prevention measures to decrease firefighter injuries. Among the analysis reports prepared by the National Fire Research Institute of Korea from 2016 to 2020, four burn-related accidents are summarized and the main causes are conveyed. The four accidents include second-degree burns from using extinguishers during containment of fires; nine firefighters burned due to re-ignition in the LPG car repair shop; two firefighters injured with third-degree burns from using fire extinguishers during life-saving events in residential housing; and injuries from the radiant heat of the tank BLEVE near the factory fire. These cases are comprehensively investigated in their respective scenes and analyzed based on the fire site investigation reports from the fire department and related theoretical explanations of risk for each accident scene. In the third case study, some experimental research is conducted to evaluate the risk involved with the use of safety gloves. This is evaluated by reviewing Fire Tactics and Standard Operational Procedures (SOP) to determine improvements and recommendations for an efficient firefighting response. Results show that the main causes of burn accidents are the insufficient use of personal protective equipment (PPE), such as safety gloves, and the failure to follow firefighting tactics or SOPs. Through the accident investigation and assessment, it is concluded that to reduce the frequency of burn accidents, the performance of firefighting equipment, SOPs, protection tactics, and safety policy systems require improvement.

비화공식 예광탄 응용을 위한 Dy3+, La3+ 그리고 Ho3+이 도핑된 MgB4O7의 열 발광 특성 분석 (Determination of Thermoluminescence Properties of MgB4O7 Doped with Dy3+, La3+ and Ho3+ for a Light Tracer Application)

  • 박진우;김나경;최지운;고재혁;진희식;정덕형;신병하
    • 한국재료학회지
    • /
    • 제32권1호
    • /
    • pp.9-13
    • /
    • 2022
  • Bullets flying with a light from the back are called "tracers". Tracers are ignited by the combustion gas of the propellant and emit bright light that allows the shooter to visually trace the flight path. Therefore, tracers mark the firing point for allies to assist shooters to hit target quickly and accurately. Conventional tracers are constructed with a mixture of an oxidizing agent, raw metal, and organic fuel. Upon ignition, the inside of the gun can be easily contaminated by the by-products, which can lead to firearm failure during long-term shooting. Moreover, there is a fire risk such as forest fires due to residual flames at impact site. Therefore, it is necessary to develop non-combustion type luminous material; however, this material must still use the heat generated from the propellant, so-called "thermoluminescence (TL)". This study aims to compare the TL emission of Dy3+, La3+ and Ho3+ doped MgB4O7 phosphors prepared by solid state reaction. The crystal structures of samples were determined by X-ray diffraction and matched with the standard pattern of MgB4O7. Luminescence of various doses (200 ~ 15,000 Gy) of gamma irradiated Dy3+, La3+ and Ho3+ (at different concentrations of 5, 10, 15 and 20 %) doped MgB4O7 were recorded using a luminance/color meter. The intensity of TL yellowish (CIE x = 0.401 ~ 0.486, y = 0.410 ~ 0.488) emission became stronger as the temperature increased and the total gamma-ray dose increased.

비화공식 예광탄 응용을 위한 Dy+Ce 및 Dy+Na 이중 도핑된 MgB4O7의 높은 열발광 특성 (High Thermoluminescence Properties of Dy+Ce, and Dy+Na Co-Doped MgB4O7 for a Light Tracer Application)

  • 박진우;김나경;최지운;최영승;류상혁;양성진;정덕형;신병하
    • 한국재료학회지
    • /
    • 제33권1호
    • /
    • pp.15-20
    • /
    • 2023
  • 'Tracers' are bullets that emit light at the backside so that the shooter can see the trajectory of their flight. These light-emitting bullets allow snipers to hit targets faster and more accurately. Conventional tracers are all combustion type which use the heat generated upon ignition. However, the conventional tracer has a fire risk at the impact site due to the residual flame and has a by-product that can contaminate the inside of the gun and lead to firearm failure. To resolve these problems, it is necessary to develop non-combustion-type tracers that can convert heat to luminance, so-called 'thermoluminescence (TL)'. Here, we highly improve the thermoluminescence properties of MgB4O7 through co-doping of Dy3++Ce3+ and Dy3++Na+. The presence of doping materials (Dy3+, Ce3+, Na+) was confirmed by XPS (X-ray photoelectron spectroscopy). The as-synthesized co-doped MgB4O7 was irradiated with a specific radiation dose and heated to 500 ℃under dark conditions. Different thermoluminescence characteristics were exhibited depending on the type or amounts of doping elements, and the highest luminance of 370 cd/m2 was obtained when Dy 10 % and Na 5 % were co-doped.