• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.259-264
• /
• 2014

IEEE 802.15.4 has been emerging as the popular choice for various monitoring and control applications. In this paper, a fault management system for DC power-lines has been designed using IEEE 802.15.4, in order to monitor DC power-lines in real time, and to rapidly detect faults and shut off the line where such faults occur. Numbers were allocated for each node and unslotted CSMA-CA method of IEEE 802.15.4 was used, the performance of which was analyzed by a simulation. For such purpose, a total of 60 bits of the control data consisting of 16 bits of the current, 16 bits of the amplitude, 28 bits of the terminal state data were sent out, and the packet transfer rate and the transmission delay time of the fault management system for DC power-lines were measured and analyzed. When the traffic load was 330 packets per second or lower, the average delay time was shown to be shorter than 0.02 seconds, and when the traffic load was 260 packets per second or lower, the packet transfer rate was shown to be 99.99% or higher. Therefore, it was confirmed that the stringent condition of US Department of Energy (DOE) could be satisfied if the traffic load was 260 packets per second or lower, The results of this study can be utilized as basic data for the establishment of the fault management system for DC power-lines using IEEE 802.15.4.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.62-73
• /
• 2012

IEEE 802.15.4 standard which has low-speed, low-power, low-cost can be efficiently used in wireless sensor network environment. Among various topologies used in IEEE 802.15.4 standard, a cluster-tree topology which has many nodes in it, transmit delay, energy consumption and data loss due to traffic concentration around the sink node. In this paper, we propose the MRS-DCA algorithm that minimizes conflicts between packets for efficient data transmission, and dynamically allocates the active period for efficient use of limited energy. The MRS-DCA algorithm allocates RP(Reservation Period) to the active period of IEEE 802.15.4 and guarantees reliable data transmission by allocating RP and CAP dynamically which is based on prediction using EWMA. The comparison result shows that the MRS-DCA algorithm reduces power consumption by reducing active period, and increasing transmission rate by avoiding collision.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.18-26
• /
• 2008

In this paper, dynamic GTS scheduling method based on IEEE 802.15.4 is proposed for wireless control system considering reliability and real-time property. The proposed methods can guarantee a transmission of real-time periodic and sporadic data within the limited time frame in factory environment. The superframe of IEEE 802.15.4 is used for the dynamic transmission method of real-time mixed traffic (periodic data, sporadic data, and non real-time message). By separating CFP and CAP properly, the periodic, sporadic, and non real-time messages are transmitted effectively and guarantee real-time transmission within a deadline. The simulation results show the improvement of real-time performance of periodic and sporadic data at the same time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.267-277
• /
• 2011

Like other wireless network protocols, IEEE 802.15.4 adopts CA (Collision Avoidance)algorithm to avoid the early collision of a new packet by randomizing its first transmission time rather than its immediate delivery. The traditional CA scheme of IEEE 802.15.4, however, selects the random access time from the predetermined range without considering the degree of current congestion. It probably causes either a long delay to settle in the suitable range for the current network load or frequent clashes especially during the long lasting heavy traffic period. This paper proposes an ACA(Adaptive Collision Avoidance) algorithm adapting the initial backoff range to the undergoing collision variations. It also introduces a mathematical model to predict the performance of ACA algorithm added to IEEE 802.15.4. With only small deviations from corresponding simulations, our analytical model shows that ACA technique can improve the throughput of IEEE 802.15.4 by up-to 41% maximally in addition to shortening the packet delays.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.572-580
• /
• 2013

IEEE 802.15.4e is a prospective standard for low latency control application in industries. This paper proposes a framework to evaluate the closed loop IEEE 802.15.4e based WNCS performance. The framework consists of two models: closed loop control system model and network model. The network model focuses on the PHY parameters of wireless link and takes the channel parameters into consideration. The PHY model combining with MAC model gives the control system model the probability of packet loss in a super-frame. In addition, redundancy mechanism is considered in IEEE 802.15.4e to reduce to data frame loss probability. The simulation is implemented in Matlab, PHY model takes the channel parameters from empirical results. Hence our evaluation gives insight into behavior of WNCS in different environments and it provides us a tool to design wireless network to achieve a good performance for control system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.299-300
• /
• 2008

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.854-859
• /
• 2009

Many pilot projects are developed using USN(Ubiquitous Sensor network). Recently USN has more attention to be used for the applications of circumstance monitoring. In order to acquire information from sensor nodes, sensor nodes need a RF transceiver. In this paper we describe the design of a RF transceiver, based on IEEE 802.15.4, for sensor nodes operating in 2.4GHz frequency band. The architecture to be implemented and the electrical performance specifications satisfied IEEE 802.15.4 are presented. The noise figure of a receiver, selectivity, phase noise of a frequency synthesizer, transmitter's linearity and spectrum mask are derived as a design parameters from the specifications of IEEE 802.15.4.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.160-162
• /
• 2006

In this paper, a heterogeneous home network is designed and implemented based on the PLC (power line communications) and the IEEE 802.15.4. This paper presents the need of the heterogeneous home network and the convergence sub-layer. The convergence sub-layer is designed and implemented on the Xelline power line communication modem with IEEE 802.15.4 communication module.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.24-30
• /
• 2007

According to development of wireless communication technologies, we need not only high data rate but low data rate system of low power consumption. This low data rate system is utilized in the field of home automation, health care, sensoring and monitoring, etc. IEEE 802.15.4 LR-WPAN system is the best choice for realizing ubiquitous networking system. In this paper SoC Architecture for IEEE 802.15.4 Low Rate WPAN is designed. IEEE 802.15.4 Low Rate WPAN system serves the functions and realization of home area network. We propose the SoC architecture for 868/915MHz frequency band of IEEE 802.15.4 Low Rate WPAN system. The key issue is to design SoC architecture which provides the function of Low Rate WPAN system to meet the requirement of IEEE 802.15.4 standards.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.43-52
• /
• 2007

IEEE 802.15.4 specification which defines low-rate wireless personal area network(LR-WPAN) has application to home or building automation, remote control and sensing, intelligent management, environmental monitoring, and so on. Recently, it has been considered as an alternative technology to provide multimedia services such as automation via voice recognition, wireless headset and wireless camera for surveillance. In order to evaluate capability of voice traffic on the IEEE 802.15.4 LR-WPAN, we supposed two scenarios, voice traffic only and coexistence of voice and sensing traffic. For both cases we examined delay and packet loss rate in case of with and without acknowledgement, and various beacon period varying with beacon and superframe order values. In LR-WPAN with voice devices only, total 5 voice devices could be applicable and in the other case, i.e., coexisted cases of voice and sensor devices, a voice device was able to coexist with about 60 sensor devices.