• 대한교통학회지
• /
• 제28권1호
• /
• pp.25-38
• /
• 2010

본 연구에서는 실도로 주행에 의해 취득된 차량의 운행 데이터의 분석을 통하여 차량의 공회전과 관련된 여러 가지 운행 특성을 도출하였다. 차종별 정차 시간 내역을 분석한 결과, 시내버스의 경우 공회전 시간은 전체 운행 시간의 30.9%에 해당되었고, 이중에서 공회전 정지가 가능한 시간은 전체 운행시간의 21.6%로 추산되었다. 하루중 공회전 정지가 가능한 시간 비율은 낮 시간대에 가장 높았고, 공회전 정지를 실시하여도 운행 시간이 증가하는 경향은 나타나지 않았다. 시내버스의 신호대기 정차 시에는 공회전 정지를 실시하기에 충분한 시간 동안 정차를 하는 경우가 많았으나, 정류장 정차 시에는 공회전 정지를 실시하기에는 충분하지 않은 시간동안 정차하는 비율이 높았다. 시내버스의 전체 운행 시간중 감속시간이 차지하는 비중은 전체의 24.7%에 달했으며, 이 가운데에서 4초 이상 감속이 지속되는 구간의 비율이 약 30%에 달하는 것으로 분석되었다. 따라서 이러한 감속시 제동 에너지를 회생하여 저장하는 하이브리드 방식을 시내버스에 적용하는 것도 가능할 것으로 예상된다.

• 대한기계학회논문집B
• /
• 제33권10호
• /
• pp.748-756
• /
• 2009

The effect of idling stop on $CO_2$ reduction was estimated, especially in the area of in-use vehicles. In order to know the fuel saving for each class of vehicles, a methodology to calculate the fuel saving was used along with a standard test using NIER-07 mode. Idling stop execution rate was estimated by analyzing the driving pattern of the in-use city buses, which shows about 75% at maximum. And this corresponds to about 5.4% reduction of the daily total fuel consumption. Finally, $CO_2$ reduction in the automotive sector was estimated, which concludes that, when idling stop device is used, about 480 thousand and 450 thousand tons of $CO_2$ could be reduced with in-use city buses and taxis, respectively. This amount corresponds to about 1.2% of $CO_2$ reduction in the automotive sector.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1111-1112
• /
• 2010

• 오토저널
• /
• 제26권1호
• /
• pp.46-48
• /
• 2004

• 한국산학기술학회논문지
• /
• 제15권11호
• /
• pp.6830-6837
• /
• 2014

최근 지구 온난화와 에너지 고갈 문제가 심각해지면서, 차량의 에코 드라이빙 (에너지 절약형 운행)에 대한 관심이 높다. 본 논문에서는 ISG(공회전 제한 장치)가 장착된 차량의 공회전 제한 사용과 정속 운전을 모니터링하는 시스템을 제안한다. 본 시스템은 차량 운행 정보 수집용 G/W 장치, 에코 드라이빙 모니터링용 스마트폰 앱 및 서버 시스템으로 구성된다. 본 논문의 주요 기여는 공회전 제한을 포함하는 에코 드라이빙의 모니터링 시스템이 제공해야 할 통합적인 기능, 구조 및 동작 원리를 정의한 것이다. 본 시스템을 통해 사용자는 공회전 제한 시간, 운전 속도, 연료 절감량, CO2 배출량 등을 확인해 봄으로써, 에코 드라이빙을 실천하는 좋은 운전 습관을 가지게 될 것이다. 서버 시스템은 운행 정보를 저장 또는 조회하는 기능을 OpenAPI 형태의 웹 서비스로 제공하여, 다양한 응용들을 쉽게 개발할 수 있는 환경을 제공한다.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.35-40
• /
• 2005

In the present study, the influence of operating conditions on fuel economy for hybrid electric vehicle was analyzed. In order to accomplish this, vehicle speed, engine speed, battery current and voltage, SOC (state of charge),motor speed and torque, generator speed and torque, engine coolant temperature etc. were measured in real time. The tests were carried out under different driving cycles which are urban and highway cycles, KOREA CITY cycle and on-road driving, and also under various operating conditions such as different initial SOC, with or without regenerative braking etc.. Generally, conventional gasoline engines show a poor fuel economy at stop and go driving, because braking energy is wasted and the engine is operated in low thermal efficiency regions. However, in case of hybrid vehicles, higher fuel economy can be obtained because of utilizing the maximum thermal efficiency regions of engine, idling stop of engine, and regenerative braking etc..

• 대한교통학회지
• /
• 제5권2호
• /
• pp.19-35
• /
• 1987

Transportation energy saving is a national concern because all national petroleum energy is imported. A number of intersections are operating as semi-protected intersections, which have left-turn signal but not exclusive left-turn lanes, because of limited roadways in urban areas. Since the traffic signal methods for the intersections having left-turn signal/lanes cannot be applied to the semi-protected intersection, it is needed to develop a new technique. The purpose of this study was to develop a traffic signal timing method at semi-protected intersections for energy saving and to computerize the method for the practical use. A probability model which could estimate left-turn utilization factors of through traffic during green signal was developed based on field studies. Employing the factors, macro-models to estimate vehicular average delay and proportions of vehicles stopped at the semiprotected intersections were developed. The calculated values of the delay model agreed well with the simulated values of a simulation model using SLAM Ⅱ, a simulation language. Using the two models and the idling fuel consumption rate and the excess fuel consumption per stop-go speed change of vehicles. a traffic signal timing method at semi-protected intersections for energy saving was developed and computerized. The method can be used for other measures of effectiveness such as minimum delay, minimum stop ratio, etc.

• 대한교통학회지
• /
• 제8권1호
• /
• pp.25-40
• /
• 1990

This study was undertaken to develop a traffic signal timing method for interconnected and semi-protected-left-turn intersections(the intersections which have left-turn signal but not exclusive left-turn lanes) on four-lane streets for energy saving and to computerize the method for the practical use. For this study, a probability model which could estimate the utilized time of the shared left-turn lane by through traffic during green period was developed based on field studies. The two left-turn treatments, leading and lagging left-turns, were tested for the intersections, and it can be concluded that the leading left-turn was more efficient for the normal urban streets on which through traffic is major traffic. Adopting the leading left-turn macro-models to estimate vehicular average delay and proportions of vehicles stopped at the intersections were developed. Using the two models as well as the idling fuel consumpution rate and the excess fuel consumption per stop-go speed change, a traffic signal timing method for the intersections for energy saving was developed and computerized. The method can be used for more than four-lane streets and for other measures of effectiveness such as minimum delay, minimum stop rates, etc.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.413-420
• /
• 2016

The permanent magnet synchronous motor has high efficiency driving performance and high power density output characteristics compared with other motors. In addition, it has good regenerative operation characteristics during braking and deceleration driving condition. For this reason, permanent magnet synchronous motor is generally applied as a power train motor for electrical vehicle. In permanent magnet synchronous motor, the most probable causes of fault are demagnetization of rotor's permanent magnet and short of stator winding turn. Therefore, the demagnetization fault of permanent magnet and turn fault of stator winding should be detected quickly to reduce the risk of accident and to prevent the progress of breakdown of power train system. In this paper, the fault diagnosis method using high frequency low voltage injection was suggested to diagnose the demagnetization fault of rotor permanent magnet and the turn fault of stator winding. The proposed fault diagnosis method can be used to check the faults of permanent magnet synchronous motor during system check-up process at vehicle starting and idling stop mode. The feasibility and usefulness of the proposed method were verified by the finite element analysis.

• Journal of Power Electronics
• /
• 제9권6호
• /
• pp.960-968
• /
• 2009

This paper presents a design optimization process for interior permanent magnet synchronous motors (IPMSM) for hybrid electric compressors (HEC) which are applied to hybrid electrical vehicles. A hybrid electric compressor is composed of an electric motor driving section and an engine driving section which is connected to the engine by a pulley belt. A hybrid electric compressor driving motor requires half of the full driving power of a compressor. Even though an engine is not operated at the idling stop mode, the electric motor drives the air-conditioner compressor by itself so that the air conditioning system can produce its minimum cooling capacity. In this paper, the design optimization of an IPMSM for a 42 (V) applied voltage system is studied using the design of experiment (DOE) and response surface method (RSM) of 6sigma. The driving characteristics of this motor drive system are measured and analyzed by experiment.