• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.298-305
• /
• 1996

The common practice for the identification of piezoelectric properties is based on the use of immittance behavior of a resonator with a certain geometry and poling direction. In this paper, a new method is suggested to identify the complex-valued piezoelectric material constants. This method is based on the minimization of differences between the analytical immittance and the experimental measurement of resonator. Non-linear minimization problems are formulated to find out the unknown properties relevant to the resonators. The immittance data used for identification are measured at a number of frequencies which cover the vicinity of resonance frequency and the low frequency region. To illustrate the proposed technique, the complex-valued coefficients are identified for a typical PZT4 ceramic composition.

• 소음진동
• /
• 제10권3호
• /
• pp.451-456
• /
• 2000

In this paper a discrete time model for the identification of nonlinear vibration system with stick-slip friction is proposed. The proposed model can handle the highly nonlinear behavior of the friction such as stick-slip phenomenon and Stribeck effect. The basic idea of the proposed model is as follows : If the nonlinearity of the system can be predicted as a simple function then this nonlinear function term cab be directly used in the discrete time model. By doing this the number of nonlinear terms in the model can be much less than those of NARMAX model which is widely used nonlinear discrete model. The simulation result shows that the proposed model can estimate the response of the nonlinear vibration system with stick-slip friction very well with less computational effort.

• 소음진동
• /
• 제7권1호
• /
• pp.61-69
• /
• 1997

Despite of the development in the finite element method, it is difficult to get the finite element model describing the dynamic characteristics of the complex structure exactly. Therefore a number of different methods have been developed in order to update the finite element model of a structure using vibration test data. This paper outlines the basic formulation for the frequency response function based updating method. One important advantage of this method is that the intermediate step of performing an eigensolution extraction is unnecessary. Using simulated experimental data, studies are conducted in the case of 10 DOF discrete system. The solution of noisy and incomplete experimental data is discussed. True measured frequency response function data are used for updating the finite element model of a beam and a plate. Its applicability to the joint identification is also considered.

• Journal of information and communication convergence engineering
• /
• 제9권3호
• /
• pp.260-265
• /
• 2011

In RFID System, when multiple tags respond simultaneously, a collision can occur. A method that solves this collision is referred to anti-collision algorithm. In 13.56MHz RFID system, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. In STAC protocol, there is no differentiation between the collided tags and others in the identification process. Therefore, tags may never be successfully identified because its responses may always collide with others. This situation may cause the tag starvation problem. This paper proposes a fair identification scheme for STAC protocol. In the proposed scheme, if the number of collided slots is large during a query round, the reader broadcasts a CollisionRound command to begin a collision round. During the collision round, the reader identifies only tags that are experienced collision during the previous query round.

• BMB Reports
• /
• 제37권1호
• /
• pp.11-27
• /
• 2004

The introduction of molecular markers in genetic analysis has revolutionized medicine. These molecular markers are genetic variations associated with a predisposition to common diseases and individual variations in drug responses. Identification and genotyping a vast number of genetic polymorphisms in large populations are increasingly important for disease gene identification, pharmacogenetics and population-based studies. Among variations being analyzed, single nucleotide polymorphisms seem to be most useful in large-scale genetic analysis. This review discusses approaches for genetic analysis, use of different markers, and emerging technologies for large-scale genetic analysis where millions of genotyping need to be performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.821-823
• /
• 1999

This paper describes a study on a person identification system which can improve currently available biometric systems. In the procedure of PIN(Personal Identification Number) input, holding time, interkey time between key presses are measured and normalized. Person identification is performed by matching using Euclidean distance of these punching dynamics. The experimental results show the possibility of improvement of the overall system performance when keypad dynamics feature is applied to the biometric systems which take PIN input using keypads.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.292-297
• /
• 2016

The first-order plus dead time(FOPDT) and second-order plus dead time(SOPDT), which describes a linear monotonic process quite well in most chemical and industrial processes and is often sufficient for PID and IMC controller tuning. This paper presents an application of heuristic harmony search(HS) optimization algorithm to the identification of linear continuous time-delay systems from step response. This recently developed HS algorithm is conceptualized using the musical process of searching for a perfect state of harmony. It uses a stochastic random search instead of a gradient search so that derivative information is unnecessary. The effectiveness of the proposed identification method has been demonstrated through a number of simulation examples.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권11호
• /
• pp.1929-1945
• /
• 2011

RFID technologies have attracted a lot of attention in recent years because of their cost/time-effectiveness in large-scale logistics, supply chain management (SCM) and other various potential applications. One of the most important issues of the RFID-based systems is how quickly tags can be identified. Tag collision arbitration plays a more critical role in determining the system performance especially for passive tag-based ones where tag collisions are dealt with rather than prevented. We present a novel tag collision arbitration protocol called Optimum Frame-Slotted Aloha (OFSA). The protocol has been designed to achieve time-optimal efficiency in tag identification through an analytic study of tag identification delay and tag number estimation. Results from our analysis and extensive simulations demonstrate that OFSA outperforms other collision arbitration protocols. Also, unlike most prior anti-collision protocols, it does not require any modification to the current standards and architectures facilitating the rollout of RFID systems.

• 한국미생물·생명공학회지
• /
• 제23권5호
• /
• pp.565-572
• /
• 1995

The aim of the present research program was to develop a strain of actinomycetes producing extracellular cathepsin B inhibitor. Soil samples were collected from various sites in Korea and a number of actinomycetes were isolated from the soil samples by applying various physical and chemical pretreatments. An economical and effective method was developed for the screening of strains producing low molecular weight cathepsin B inhibitor, and consequently a strain (SMF28) among over 700 isolates was selected. Chemotaxonomic and numerical identification were carried out for the isolate. Fifty taxonomic unit characters were tested and the data were analyzed numerically using TAXON program. The isolate was identified as a strain of Streptomyces chromofuscus.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2537-2539
• /
• 2005

In many cases the systems are so complex that it is not possible to obtain reasonable models using physical laws. Also a model based on physical laws contains a number of unknown parameters even if the structure is derived from physical laws. These problems can be solved by system identification. In this paper, a nano stage system is selected as an example for system identification. The transfer functions of this system is derived by using state-space model structure based on input/output data through experiment.