• Journal of Sensor Science and Technology
• /
• v.24 no.2
• /
• pp.113-118
• /
• 2015

Intravenous (IV) infusion set is one of the most common treatment methods applied to hospitalized patients. However, it is necessary to check the injection of IV solution in order to prevent patients from any possible medical injuries. In this paper, using the optical sensors to detect exhaustion of IV solution was proposed. The optical sensor is coplanar structure composed of LED and photodiode which is installed according to focal distance of the lens. These two elements detect exhaustion of IV solution at the desired point conveniently. Through the results of experiments using various wavelength of LED (R.G.B), the blue LED was selected to the optimum light source. The suggested optical sensor can detect exhaustion of IV solution by the differences in the amount of light which is caused by properties such as total reflection, refractive index and scattering. From the implementation, the detector is applicable to both containers of IV solution, glass bottle and plastic pack. And also the result shows apparent differences according to existence of IV solution even if the IV solution color and illumination were changed.

• Journal of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.43-47
• /
• 1976

The determination of oxalic acid is carried out with Zr(IV)-XO complex by spectrophotometry. The Mechanism of this method in 1∼4N HCl solution is shown below (XO = xylenol orange); Zr(IV)+XO=Zr(IV)-XO+ excess XO, Zr(IV) - XO + oxalate = Zr(IV)-oxalate + XO When oxalic acid is added to Zr(IV)-XO complex(red color), the absorbance of Zr(IV) - XO complex is decreased in proportional to the amount of oxalic acid. The malic, malonic, maleic, fumaric, succinic, folic and glutamic acid did not interfere even if they are present in hundred times of oxalic acid. If they are present in the same amount as oxalic acid, citric and tartaric acid did not interfere but they are interfere when they are present in much more than that of oxalic acid.

• Journal of dental hygiene science
• /
• v.22 no.3
• /
• pp.139-147
• /
• 2022

Background: Temporary crown resins are used prior to prosthesis placement, indicating the importance of aesthetics. The aim of this study was evaluate the color stability of various staining solutions according to the color of temporary crown resins using VITA Easyshade^Ⓡ V. Methods: The temporary crowns used were the powder-liquid type and included four shades. A total of 36 specimens were fabricated in the form of disks with a diameter of 1.8 mm and a depth of 2 mm. They were divided into four groups of nine each, and staining was performed for seven days by precipitation in 3 mL of three staining solutions composed of distilled water, black coffee, and red wine. Color and color stability evaluations were performed by a trained examiner using a digital spectrophotometer (VITA Easyshade^Ⓡ V). Color stability was analyzed using the ΔE value. Results: Because of the color stability evaluation using the ΔE value, the difference between three and seven days was significant in the specimen I and III groups (p<0.05). Further, post hoc analysis showed that the ΔE value of red wine was significant, indicating that the color stability in red wine was low. The ΔE values in group II between days three and seven were statistically significant (p<0.05). Post hoc analysis showed that distilled water, coffee, and wine had the highest ΔE values on day three. On day seven, the ΔE value for wine was significant, and the color stability was low. There was no significant difference in group IV according to the staining period and staining solution; therefore, color stability was high (p>0.05). Conclusion: This study showed that most temporary resin restorations exhibited color stability in the staining solution. The darker the color of the temporary resin restoration, the higher the color stability against extrinsic staining.

• Journal of Pharmaceutical Investigation
• /
• v.16 no.4
• /
• pp.139-147
• /
• 1986

A singly charged methyl orange(MO) anion was found to be extracted with chlorpheniramine maleate(CPM) as a 1 : 1 complex in chloroform. Of various solvents, MO-chloroform system gave a yellow color for CPM, while in the absence of CPM, an organic phase showed almost no color. In this way, the spectrophotometric method was investigated for the determination of CPM by solvent extraction. The addition of alcoholic bolic acid solution to the solvent extract gave a higher color stability and transparency at least 5 days, but the extract alone lost its color intensity significantly. CPM is determined by measuring the absorbance of the extracts over a range of $1{\sim}7{\times}10^{-4}M\;(39{\sim}273\;{\mu}g/ml)$ in aqueous solution at 423 nm. The molar absorptivity was $2.26{\times}10^3\;l,\;mol^{-1},\;cm^{-1}$. The absorbance of the extract was constant in the range of pH $3.7{\sim}4.6$. This novel method was applied for the determination of CPM in artificial and commercial preparations in comparison with the analytical method of CPM tablets in K.P.IV. The results obtained showed that the former was better in accuracy and time consumption than the latter.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.2
• /
• pp.147-158
• /
• 1998

The purpose of this study was to test the stability of TPN basic solutions containing amino acids and dextrose. Test solutions containing $4.25\%$ amino acids in $25\%$ dextrose (central TPN basic solution) or $4.25\%$ amino acids in $10\%$ dextrose (peripheral TPN basic solution) were prepared. Two different amino acids solutions $(Fravasol^{(R)}\;vs\;Freamine^{(R)})$ were tested. The samples were taken from each admixture and stored in the evacuated, sterile containers at $2{\sim}8^{\circ}C$ and ambient room temperature. Each sample was analyzed at 0, 3, 7, 14 and 30 days of storage. Each amino acid was analyzed by amino acid analyzer. Dextrose content was measured by polarimeter. The pH and chromagen formation were also monitored. The decomposition was measured by the changes in concentration of amino acids and dextroser TPN basic $solution-Freamine^{(R)}$ admixture stored at $2\sim8^{\circ}C$ were stable for 30 days. Central and peripheral TPN basic solutions stored at room temperature were stable for 7 days and 14 days, respectively. There were no changes in color for 30 days by naked eye. Amino acid concentrations in TPN basic $solution-Fravasol^{(R)}$ admixture stored at $2\sim8^{\circ}C$ or room temperature were stable for 30 days. But, significant color change was detected according to passing time. In conclusion, Peripheral TPN basic $solution-Fravasol^{(R)}$ admixture stored at room temperature and in refrigerator were stable for 3 days and 7 days, respectively. However, central TPN basic solution-Fravasol admixtures were unstable. Therefore, it is recommended that it should be admixed right before use.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.69-76
• /
• 1982

The purpose of this study was to evaluate the color penetration of cavity margin with composite resin restorations in some Korean foods substance-soy sauce and hot bean paste. Fifty specimans which were extracted caries free third molar of young adults recently. All of the prepared 100 cavities were filled with two kinds of composite resin (Hipol$^{(R)}$and Restodent$^{(R)}$). The experimental specimans were divided into five groups by the following procedures. Group I : Filling of composite resin and polishing. Group II : Filling, polishing, etching of cavity and sealing. Group III : Etching, sealing, filling and polishing. Group IV : Etching, sealing, filling, polishing, and repeated of etching of cavity margin and sealing. Group V : Etching, sealing, filling, polishing, and sealing again without etching. Before examination, the restorated teeth were subjected to thermal cycling ($4^{\circ}C$ and $60^{\circ}C$). All the specimens were immersed in soy and 30% hot bean paste solution under $37^{\circ}C$ incubator during six weeks. Then, the specimens were sectioned bucco-lingually through the center of two restorations with diamond disk and examined under a. metallographic microscope. (Union 6617 U.S.A.) Thereafter, the degree of color penetration was calculated and analyzed. The obtained results were as follows: 1. The color penetration was the lowest in the procedure of Group III which was acid etching, sealing, composite resing filling, and polishing. 2. The color penetration occured in soy and hot bean paste, but the degree of penetration was not so significant statistically between them. 3. The degree of color penetration was not so significant statistically between Hipol$^{(R)}$ and Restondent$^{(R)}$.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.7
• /
• pp.1000-1004
• /
• 2012

Fungal biomass and fungal extract of the nonpathogenic fungus Neurospora crassa were successfully used as reducing agents for the biosynthesis of platinum nanoparticles (PtNPs). The experiment was carried out by exposing the fungal biomass or the fungal extract to a 0.001 M precursor solution of hexachloroplatinic(IV) acid ($H_2PtCl_6$). A change of color of the biomass from pale yellow to dark brown was the first indication of possible formation of PtNPs by the fungus. Subsequent analyses confirmed the intracellular biosynthesis of single PtNPs (4-35 nm in diameter) and spherical nanoaggregates (20-110 nm in diameter). Using the fungal extract, similar results were obtained, producing rounded nanoaggregates of Pt single crystals in the range of 17-76 nm.

• Korean Journal of Materials Research
• /
• v.31 no.1
• /
• pp.8-15
• /
• 2021

Transparent, photocatalytic, and self-cleaning TiO2 thin film is developed by TiO2 sol-gel coating on glass and polycarbonate (PC) substrates. Acetyl acetone (AcAc) suppresses the precipitation of TiO2 by forming a yellowish (complex) transparent sol-gel. XPS analysis confirms the presence of Ti2p and O1s in the thin films on glass and PC substrates. The TiO2-sol is prepared by stabilizing titanium (IV) isopropoxide (TTIP) with diethylamine and methyl alcohol. The addition of AcAcsilane coupling solution to the TiO2-sol instantaneously turns to yellowish color owing to the complexing of titanium with AcAc. The AcAc solution substantially improves the photocatalytic property of the TiO2 coating layer in MB solutions. The coated TiO2 film exhibits super hydrophilicity without and with light irradiation. The TiO2 thin film stabilized by adding 8.7 wt% AcAc shows the highest photo-degradation for methylene blue (MB) solution under UV light irradiation. Also, the optimum photocatalytic activity is obtained for the 8.7 wt% AcAc-stabilized TiO2 coating layer calcined at 450 ℃. The thin-films on glass exhibit fast self-cleaning from oleic acid contamination within 45 min of UV-light irradiation. The appropriate curing time at 140 ℃ improves the anti-fogging and thermal stability of the TiO2 film coated on PC substrate. The watermark-free PC substrate is particularly beneficial to combat fogging problems of transparent substrates.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.123-130
• /
• 1969

Five varieties of sweetpotatoes recommended in Korea were investigated with respect to the storing capacity, resin content and the possibility of developing sweetpotato chips as a new processed food item. The results are summarized as follows: 1) Two varieties, Suwon No. 147 and Chun-Mi were more resistant to chilling injury and soft-rot decay than other varieties. 2) The contents of resinous and polyphenolic substances were quite different depending upon the variety. 3) Sweetpotato chips of different color were made from different varieties and rapeseed oil was found to be the best as frying oil. 4) Best conditions to prepare sweetpotato chips with fresh color and proper texture were to dip slices of 1-2 mm thickness in 0.25% sodium bisulfite solution at $40^{\circ}C$ for 30-40 minutes and to subject to deep frying in an oil bath at $150-160^{\circ}C$ for 2.5 to 3.5 minutes. 5) Polyethylene-cellophane film as packing material of sweetpotato chips was the film in the moisture proof and film-impact tests.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.305-310
• /
• 2009

$TiO_2$ thin films consisting of positively charged poly (diallyldimethylammonium chloride) (PDDA) and negatively charged titanium (IV) bis (ammonium lactato) dihydroxide (TALH) were successfully fabricated on a poly (methyl methacrylate) (PMMA) by layer-by-layer (LBL) self-assembly method. By the measurement of quartz crystal microbalance (QCM), it was found that as the solution pH of TALH decreased, the deposition volume of TALH increased and the thickness of (PDDA/TALH) thin film coated on the surface of PMMA particles increased. The PMMA particles coated with the coating sequence of (PDDA/TALH)n showed the variation of color changes as a function of the number of bilayer. The number of bilayer (n) of (PDDA/TALH) thin films was 10 and 20, the values of $a^*$ and $b^*$ decreased from those of PMMA particles without coating films and the color changes was shifted to green and blue direction in the $a^*$, $b^*$ chromaticity diagram. And then, the number of n increased to 30 and 40, the values of $a^*$ and $b^*$ increased and the color changes was shifted to red and yellow direction, respectively. Finally the PMMA particles coated with $(PDDA/TALH)_{50}$ thin film showed a little same value of $a^*$ and $b^*$ with the PMMA particles without (PDDA/TALH) thin film.