• 대한조선학회지
• /
• 제28권3호
• /
• pp.88-94
• /
• 1991

• 대한조선학회지
• /
• 제28권4호
• /
• pp.59-68
• /
• 1991

• 대한조선학회지
• /
• 제28권2호
• /
• pp.92-97
• /
• 1991

• 대한조선학회지
• /
• 제29권1호
• /
• pp.60-65
• /
• 1992

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.484-495
• /
• 2010

The speed-power prediction is one of the most important functions of towing-tank facilities. Generally, ITTC-1978 extrapolation method is employed for the full-scale powering prediction. During the procedure, the friction resistance line plays a major role to predict both model- and full-scale resistance. In this paper, the form factors determined by ITTC-1957 line for several kinds of vessels are compared with the values obtained using the lines proposed by Grigson(1993) and Katsui et al.(2005). Resistance and self-propulsion coefficients predicted by three different friction resistance lines are minutely analyzed. Finally, brake powers and revolutions estimated by flat plate friction resistance lines of Grigson and Katsui et al. are compared with the results obtained from ITTC-1957 line.

• EDISON SW 활용 경진대회 논문집
• /
• 제1회(2012년)
• /
• pp.109-112
• /
• 2012

선박의 저항을 추정하는 일은 선박설계에 있어 가장 기본적인 작업이다. 그러나 선박의 크기는 매우 크기 때문에 일반적으로 모형선 실험을 통해 선박의 저항을 추정한다. 이 때, 모형선 실험은 Froude 수를 기준으로 수행하게 되는데 이 때문에 모형선과 실선의 Reynolds 수가 서로 다른 영역에 놓이게 된다. 따라서 모형선 실험에서 얻어진 데이터를 실선에 그대로 적용할 수 없기 때문에 모형선-실선 저항추정법을 사용하게 된다. 본 연구에서는 이러한 모형선-실선 저항추정법에 사용되고 있는 2 차원 외삽법을 살펴보고 이 기법에 사용되고 있는 ITTC 마찰저항곡선을 등가평판 주위의 유동장 해석결과와 비교하였으며 ITTC 마찰저항곡선에 대해 고찰하였다.

• 대한조선학회논문집
• /
• 제42권5호
• /
• pp.435-447
• /
• 2005

The 24th ITTC Specialists Committee on Stability in Waves is conducting an international benchmark study where numerical methods for the calculation of ship motion in damaged condition are compared on the basis of specified tests in order to assess the present state of the art in this field. The study is finished and some results are presented in this paper providing an initial insight into the status of damage models and numerical methods and a collective assessment of their performance. The preliminary analysis has shown that current methods are satisfactory, capturing the fundamental physical performance of damaged ships in specified conditions.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.37-44
• /
• 2016

Recently researchers are conducting a lot of research related to EEDI in order to satisfy IMO resolution MEPC. Especially they are interested in design of energy saving device. This paper is to design the asymmetric pre-swirl stator for 160K LNG carrier in order to reduce energy. Two types of the asymmetric pre-swirl stator are taken into account; constant and variable pitch angle stators. “constant” and “variable” mean state that the pitch of stators change by radius. The dimensions of the stators are initially determined using potential-flow code. The propulsion performances of the stators are predicted using viscous-flow code. The model test is carried out in towing tank in PNU. Prediction of ship performance generally follow ITTC recommended. Ship wake prediction was done by two method, ITTC 1978 and ITTC 1999. Therefore propulsion performances were compared ITTC 1978 with ITTC 1999 methods. Comparison components are delivered power and thrust deduction coefficient of the model. Final pre-swirl stator is selected by comparing experiment and CFD.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.292-305
• /
• 2021

The present study concerns uncertainty assessment of powering prediction from towing tank model tests, suggested by the International Towing Tank Conference (ITTC). The systematic uncertainty of towing tank tests was estimated by allowance of test setup and measurement accuracy of ITTC. The random uncertainty was varied from 0 to 8% of the measurement. Randomly generated inputs of test conditions and measurement data sets under systematic and random uncertainty are used to statistically analyze resistance and propulsive performance parameters at the full scale. The error propagation through an extrapolation procedure is investigated in terms of the sensitivity and coefficient of determination. By the uncertainty assessment, it is found that the uncertainty of resultant powering prediction was smaller than the test uncertainty.

• 한국항해항만학회지
• /
• 제37권5호
• /
• pp.481-486
• /
• 2013

본 연구에서는 18미터급 쌍동형 선형의 선수벌브 유무에 따른 운동응답특성을 선형 스트립이론에 기초한 상용코드(Seakeeper)를 이용하여 추정하였다. 계산조건으로는 ITTC 파스펙트럼에 기초한 뷰포트 풍력계급 3 ($\bar{T}=2.98s$, $H_{1/3}$ =0.6m), 4 ($\bar{T}=3.85s$, $H_{1/3}$ =1m) 및 5 ($\bar{T}=5.44$, $H_{1/3}$ =2m)의 파스펙트럼을 산출하였고, 조우각은 선수파, 선수사파 및 횡파를 적용하여 종동요의 선체운동응답스펙트럼을 해석하였다. 선수벌브가 적용된 쌍동선 선형은 선수파와 선수사파에서 최대 20%의 종동요 응답이 감소하는 효과를 나타냈다.