• Journal of Korean Society of Forest Science
• /
• v.2 no.1
• /
• pp.59-65
• /
• 1962

The objects of this experiment are to find out the local variation of the Dendrolimus Spectabilis Butler, of which sample was first collecteted 15 bodies of male and 35 bodies of female adult at Suwon area. the wing veins and the scale shape have been observed through the microscope (100) and the scale size (from the bottom of the scale to the top of the lobe) has also been measured by the micrometer. The results of this experiment are as follows: 1. There is nodifference between the venation of the male body and that of the female body. Also we can not find any differences between the right and the left wing, and between each body. The fore wings consit of 13 longitudinal veins and the only one "V" shape cross vein which is between the 5th and 6th vein. The hind wings consist of 9 longitudinal veins and the only one "V" shape cross vein which is mentioned above. 2. The scale types are divided into 4 Groups in its shape. (A) The scales of I Group are short and the lower parts of them almost look like a circle, having a small projection at their bottom. The upper parts of them have 2 or 10 lobes. We can find the lobes with fine hairs or the lobes without them at the top of the scales. (B) The scales of II Group are longer than that of I Group. The shape of the lower parts of the scales is similar to that of I Group. The upper parts of the scales have 2 or 10 lobes. (C) The scales of III Group are long and almost alike in a long wedgeshape. The upper parts of the scales have 2 Or IO lobes and we can find long fine hairs at the top of each lobe. (D) The scales of IV Group are long and the shape of the lower parts of the scales is similar to that of III Group. The lobes are short and not sharp. We can find 2 or 9 lobes. 3. The scales of I Group and II Group are distributed on the whole surface except on the outer margin. The most scales of III Group are distributed on the wing base. The scales of IV Group are distributed on the outer margin only. The scales with 4 or 5 lobes are most widely distributed not considering their Group or distributing parts. 4. In I Group the variation of the scale length become gradually greater as the number of the lobes are increasing. In II, III, IV Group, however, the variation of the scale length is in direct opposition to the above mentioned. The variation of the scale width becomes pretty small in any Groups and the scale width become wider as the number of the lobes are increasing. 5. The source of the wing colouration is pigmnetal colour, and the wing colouration is expressed by the amount of brown and white scales.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.19-29
• /
• 1976

The fiberboard and paper mills in this country are much affected by the price hikes and shortage of phenolic resins, since phenolic acid as a raw material depends on imported good. It is prerequisite to fiberboard industry to help replace with other sized and stabilize the prices and supply of them, improving the quality of boards. Thus, the present study was carried out to examine the effect of strength increasing sized such as urea formaldehyde resin (anion and cation type) and urea melamine copolymer resin, on the quality of the wet forming hardboard, and comparing them with two types of proprietary modified melamine resins, and ordinary size, phenol resin. The Asplund pulp was prepared from wood wastes mixed with 20 percent of lauan and 80 percent of pines as a fibrous material. After sizing agents were added at a pH of 4.5 for 10 minutes with alum in the beater, the stock was made in the form of wet sheet, prepared, and then performed by hot pressing cycle: $180^{\circ}C$, $50-6-5kg/cm^2$, 1-2-7 minutes. The properties of hardboard were examined after air conditioning. The results obtained are summarized as follows: 1. There is a significant difference in specific gravity among hardboards that were treated with strength increasing resins, but no difference is effected by the increase in the resin content. In the case of modified melamine resin, its specific gravity is highest. The middle group comprises cation type of urea resin, anion type of urea resin, and acid colloid of urea-melamine copolymer resin. The lowest is phenolic resin. 2. The difference of the moisture content of hardboard both by the resins and by the amount of each resin applied is significant. The moisture content of hardboard becomes lower along with the increase of each resin content, but there is no difference between 2 and 3 percent. 3. For water absorption, there is a significant difference both in the adhesives used and in the amount of paraffin wax emulsion. The water resistance becomes higher inn proportion to the content of the paraffin wax emulsion. To satisfy KS F standards of the water resistance, a proprietary modified melamine resin (p-6100) and modified cation type of urea resin (p-1500) do not require any paraffin wax emulsion, but in the case of anion type of urea resin, cation type of urea resin, and urea-melamine copolymer resin, 1 percent of paraffin wax emulsion is needed, and 2 percent of paraffin wax emulsion in the case of phenolic resin. 4. The difference of flexural strength of hardboard both by the resins and by the amount of each resin is significant. Modified melamine resin shows the highest degree of flexural strength. Among the middle group are urea-melamine copolymer resin, p-1500, anion type of urea resin, and cation type of urea resin. Phenolic resin is the lowest. The cause may be attributable to factors combined with the pressing temperature, sizing effect, and thermal efficiency of press platens heated electrically. 5. Considering the economic advantages and properties of hardboard, it is proposed that urea-melamine copolymer resin and cation type of urea resin be used for the development of the fiberboard industry. It is desirable to further develop the modified urea-melamine copolymer resin and cation type of urea resin through continuous study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.6
• /
• pp.703-712
• /
• 2017

In this study, the fat contents and fatty acid compositions of Korean beef (tenderloin, loin, strip loin, chuck roll, foreshank, top blade, top round, brisket point, center of heel, and ribs) and pork (tenderloin, loin, shoulder loin, foreshank, jowls, ham, eye of round, belly, skirt meat, and ribs) parts were investigated. The fat contents of Korean beef ranged from 5.25% (top round) to 35.94% (brisket point). The major fatty acids were palmitic acid (C16:0), stearic acid (C18:0), and oleic acid (C18:1, n-9); especially, oleic acid was the most abundant. Loin had similar fat content as ribs, but there were some differences in fatty acid composition. Linolenic acid (C18:3, n-3) and linoleic acid (C18:2, n-6) were the most abundant fatty acids in strip loin and ribs (38.63 mg/100 g and 564.71 mg/100 g, respectively). Arachidonic acid (C20:4, n-6) was only found in strip loin, top blade, and ribs, and its amounts were in the following order: ribs (2.50 mg/100 g)> strip loin (1.33 mg/100 g)> top blade (1.19 mg/100 g). Total trans-fatty acid (TFA) content of top round was the lowest among all parts, and the ratio of unsaturated fatty acid (UFA) was the highest in foreshank. The fat contents of pork ranged from 4.16% (tenderloin) to 18.47% (belly), but there was no significant difference in fat content between tenderloin, loin, foreshank, ham, and eye of round. The major fatty acids were palmitic acid, stearic acid, oleic acid, and linoleic acid, and their amounts were in the following order: oleic> palmitic> linoleic> stearic acid. Docosahexaenoic acid (C22:6, n-3) was only detected in belly, and the TFA content of belly was the highest. The ratio of UFA was highest in ham. These findings will be useful in the development of standardization data on fatty acid composition in different parts of Korean beef and pork.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.3
• /
• pp.234-240
• /
• 2007

Purpose: In this study we propose a block-iterative method for reconstructing Compton scattered data. This study shows that the well-known expectation maximization (EM) approach along with its accelerated version based on the ordered subsets principle can be applied to the problem of image reconstruction for Compton camera. This study also compares several methods of constructing subsets for optimal performance of our algorithms. Materials and Methods: Three reconstruction algorithms were implemented; simple backprojection (SBP), EM, and ordered subset EM (OSEM). For OSEM, the projection data were grouped into subsets in a predefined order. Three different schemes for choosing nonoverlapping subsets were considered; scatter angle-based subsets, detector position-based subsets, and both scatter angle- and detector position-based subsets. EM and OSEM with 16 subsets were performed with 64 and 4 iterations, respectively. The performance of each algorithm was evaluated in terms of computation time and normalized mean-squared error. Results: Both EM and OSEM clearly outperformed SBP in all aspects of accuracy. The OSEM with 16 subsets and 4 iterations, which is equivalent to the standard EM with 64 iterations, was approximately 14 times faster in computation time than the standard EM. In OSEM, all of the three schemes for choosing subsets yielded similar results in computation time as well as normalized mean-squared error. Conclusion: Our results show that the OSEM algorithm, which have proven useful in emission tomography, can also be applied to the problem of image reconstruction for Compton camera. With properly chosen subset construction methods and moderate numbers of subsets, our OSEM algorithm significantly improves the computational efficiency while keeping the original quality of the standard EM reconstruction. The OSEM algorithm with scatter angle- and detector position-based subsets is most available.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.2
• /
• pp.126-134
• /
• 1999

To provide the basic information for the water improvement and control of water resource in Nakdong river districts, the physico-chemical characteristics of water in four main streams and three branch streams of the river were investigated through 36 times totally, one time per each month from January in 1995 to November in 1997. The pH values of each sites in main or branch stream of Nakdong river was pH $6.3{\sim}9.3$ range, pH range of Jukpo and Namji area at spring and fall was almost over pH 8.5, which was exceeded the water quality standard for agriculture. DO values of Nakdong river was almost $8.0{\sim}13mg/l$, except for Kangchang area in downstream of Kumho river. BOD values in Dasa area where was prior to mixing of Kumho river was $1.5{\sim}4.8mg/l$, which was under the water quality standard for agriculture(8mg/l), but BOD values followed mixing of Kumho river was over the permit standard of agricultural water as $3.8{\sim}8.9mg/l$ in Koryung, $3.4{\sim}8.4mg/l$ in Jukpo and $3.3{\sim}7.8mg/l$ in Namji according to time or season. Especially, BOD values at Gangchang area in Kumho river were $7.6{\sim}18.5mg/l$, which was over the water quality standard for agriculture and so Kumho river was a main pollutant: source of Nakdong river. COD values of main stream of Nakdong river was over the permit standard of agriculture(8mg/l) as $5.2{\sim}13.5mg/l$ in Koryvng, $5.0{\sim}12.7mg/l$ in Jukpo and $5.0{\sim}12.2mg/l$ in Namji according to time or season. And COD values was much high rather than BOD values and its gap of concentration was increased along with downstream. $NH_4-N$ of main stream of Nakdong river followed mixing of Kumho river($0.5{\sim}13.1mg/l$) was the highest affected in Koryung($0.18{\sim}5.0mg/l$) and detected much more in winter than in summer. T-N in Koryung($4.96{\sim}12.06mg/l$) followed mixing of Kumho river was significantly high rather than $2.86{\sim}4.86mg/l$ in Dasa, $4.20{\sim}8.20mg/l$ in Jukpo and $3.18{\sim}8.64mg/l$ in Namji, which was almost over the permit standard of agricultural water(1.0mg/l). T-P in Koryung($0.10{\sim}0.58mg/l$) also was significantly high rather than those $0.07{\sim}0.36mg/l$ in Jukpo and $0.08{\sim}0.4mg/l$ in Namji as over the standard of agricultural water(0.1mg/l). The concentration of T-N or T-P in Nakdong districts was trended of increasing in every year.

• Applied Microscopy
• /
• v.30 no.2
• /
• pp.213-232
• /
• 2000

The development of the knee joint was studied by electron microscopy in human fetuses ranging from 20 mm to 260 mm crown-rump length ($7\sim30$ weeks of gestational age). The appearance of the primordium of the meniscus and cruciate ligament was conspicuous as the mesenchymal cells , preceeding that of joint space at 30 mm fetus. The primitive joint cavity was first seen in the interzone from the 40 mm fetus and its intermediate layer proceeded developing as a narrow cleft which was closely incorporated with two chondrogenic layers. Poorly differentiated mesenchymal cells of the meniscus at 40 mm fetus containing predominantly free ribosomes differentiated into fibroblasts at 60 mm fetus. By 100 mm fetus, the fibroblast in inner zone of the meniscus presented as oval profiles with a short cell processes, whereas middle and peripheral zones presented as elongated cells. Differentiation of the synovial membrane coincided with clarification of the joint cavity When dilatation of the synovial cavity occurred, the two types of synovial cells were identified at 60 mm fetus. By 100 mm fetus a majority of the intimal cells were B-type. B-type cells were clearly distinguishable from A-type cells by their content of extensive rough endoplasmic reticula and well developed Golgi complexes. In contrast, A-type cells had numerous filopodia, pinocytotic vesicles, lysosomes and large vacuoles. At 260 mm fetus the B-type cells were also a majority of intimal cells. At 260 mm fetus the inner zone of the meniscus was filled with parallel oriented fascicles of collagenous fibers and oval fibroblasts. The middle zone was constituted of parallel and radially arranged fibers and fibroblasts. The outer zone was populated by elongated fibroblasts encircled by crossed collagenous fibers with the blood vessels. At 30 mm fetus the fibroblasts of the cruciate ligament contained rough endoplasmic reticula and mitochondria. Collagen fibrils were noted within narrow cytoplasmic processes which were continued with the extracellular space. Collagen fibrils of ligament were filled in the bulk of extracellular space at 100 mm fetus. By $150\sim260mm$ fetus, the cruciate ligaments were constituted of longitudinally oriented bundle of collagen fibrils with irregular rows of round cells between.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.327-335
• /
• 1993

Phase relations in the system Pd-Sb-Te were investigated at $1000^{\circ}$, $800^{\circ}$, and $600^{\circ}C$, using the sealed-capsule technique; the quenched products were studied by reflected light microscopy, X-ray diffraction, and electron microprobe analysis. At $1000^{\circ}C$, the solid phases Pd, $Pd_{20}Sb_7$, $Pd_8Sb_3$, $Pd_{31}Sb_{12}$, and $Pd_5Sb_2$ are stable with a liquid phase that occupies most of the isothermal diagram. Additional solid phases at $800^{\circ}C$ are $Pd_5Sb_3$, PdSb, $Pd_8Te_3$, $Pd_7Te_3$, and a continuous $Pd_{20}Te_7-Pd_{20}Sb_7$ solid solution becomes stable. At $600^{\circ}$, $PdSb_2$, $Pd_{17}Te_4$, $Pd_9Te_4$, PdTe, $PdTe_2$, $Sb_2Te_3$, and Sb and continuous PdSb-PdTe and $PdTe-PdTe_2$ solid solutions are stable. All the solid phases exhibit solid solution, mainly by substitution between Sb and Te to an extent that varies with temperature of formation. The maximum substitution (at.%) of Te for Sb in the Pd-Sb phases is: 44.3 in $Pd_8Sb_3$, 52.0 in $Pd_{31}Sb_{12}$, 46.2 in $Pd_5Sb_2$ at $800^{\circ}C$; 15.3 in $Pd_5Sb_3$, 68.3 in $PdSb_2$ at $600^{\circ}C$. The maximum substitution (at.%) of Sb for Te in the Pd-Te phases is 34.5 in $Pd_5Sb_3$ at $800^{\circ}C$, and 41.6 in $Pd_7Te_3$, 5.2 in $Pd_{17}T_4$, 12.4 in $Pd_9Te_4$, and 19.1 in $PdTe_2$ at $600^{\circ}C$. Physical properties and X-ray data of the synthetic $Pd_9Te_4$, PdTe, $PdTe_2$, $Pd_8Sb_3$, PdSb, and $Sb_2Te_3$ correspond very well with those of telluropalladinite, kotulskite, merenskyite, mertieite II, sudburyite, and tellurantimony, respectively. Because X-ray powder diffraction data consistently reveal a 310 peak ($2.035{\AA}$), the $PdSb_2$ phase is most probably of cubic structure with space group $P2_13$. The X-ray powder pattern of a phase with PdSbTe composition, synthesized at $600^{\circ}C$, compares well with that of testibipalladite. Therefore, testibiopalladite may be a member of the $PdSb_2-Pd(Sb_{0.32}Te_{0.68})$ solid solution series which is cubic and $P2_13$ in symmetry. Thus the ideal fonnula for testibiopalladite, presently PdSbTe, must be revised to PdTe(Sb, Te). Borovskite($pd_3SbTe_4$) has not been found in the synthetic system in the temperature range $1000^{\circ}-600^{\circ}C$.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.373-386
• /
• 2004

This study was conducted to investigate effects of the brown seaweed residues supplementation on in vitro fermentation, and milk yield and milk composition of dairy cows. Therefore, two experiments consisting of an in vitro and an in vivo growth trial were used. In in vitro experiment, brown seaweed residues(BSR) was supplemented in basal diet with 0, 1, 2 and 4% respectively, and incubated for 3, 6, 9, 12, and 24 h. The pH value, ammonia-N and VFA were investigated. The pH value tended to increase with increasing BSR during the incubation. Particularly, pH was significantly higher in BSR treatments compared with control at 9 h(p < 0.05). While, ammonia-N concentration was not significantly different across treatments during the whole incubation. BSR supplementation did not affect total VFA production, but acetate was linearly increased in BSR treatments compared with control at 12 h(p < 0.05), and its concentration was highest(92.70 mM) in 4% BSR among treatments. The concentration of iso-butyrate tended to increase in BSR treatments in comparison to control during the incubation. In addition, the concentration of iso-valerate was higher in BSR treatments compared with control at 12 and 24 h. In growth trial, BSR was added(800 g/d/animaI) to diets of dairy cow. Dry matter intake was not affected by BSR supplementation, but daily milk yield(kg) significantly increased in BSR treatment compared with control(p < 0.05). However, milk composition(%) and milk yield(kg) were not significantly different between treatments. Milk fat(% and kg/d) tended to slightly decrease in BSR treatment compared with control(3.59% and 1.06 kg/d vs. 3.32% and 1.01 kg/d), The contents of C16:0 and C20:4 in milk significantly increased in BSR treatment compared with control reflecting from dietary fatty acid composition. The content of C18:0 in milk which is end product of biohydrogenation of CI8 unsaturated fatty acids in the rumen significantly increased in BSR treatment compared with control(p < 0.05). C18:2 content in milk tended to decrease, but tended to increase trans-II C18:l and CLA contents in milk in BSR treatment compared with control. In conclusion, it could be summarized that BSR may stabilize rumen pH, and it could improve milk yield and CIA content in milk with more than 4% of diet. Therefore, BSR could be beneficially used in dairy diets as a feed additive.

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.260-265
• /
• 2011

Plantago asiatica L. (P. asiatica) has been used as one of the popular folk medicines in Asia for human health care practices. Various activities of P. asiatica have been reported, such as anti-oxidant, anti-glycation, anti-inflammatory and hepatoprotective activity. Therefore, the potential of P. asiatica to reduce oxidative stress has been studied in several ways for over 20 years, especially at liver and kidney. However no investigation has been reported revealing its protective effect on prostate. Method: Treatment of P. asiatica leaf ethanolic extract (PLE) (1 g/kg body weight (b.w.), 2 g/kg b.w., or 4 g/kg b.w.) were given separately to animals for pretreatment once per day for 7 days, and on the seventh day ferric nitrilotriacetate (Fe-NTA; 0.24 mmol Fe/kg b.w.), which is known as an oxidative stress-inducer at prostate, was administrated by i.p to negative control group. At the end of the study period, dissection was carried out for detecting the prostate protective effect of PLE. Result: Fe-NTA-treated animals produced reactive oxygen species (ROS) resulting in depletion of antioxidant biomaker, such as glutathione (GSH), glutathione reductase (GR), and glutathione s-transferase (GST) and increase of lipid peroxidation in prostate. However, PLE pretreatment resulted in an increase in the GSH, GST and GR levels concentration dependent manner and in an significant decrease in the levels of lipid peroxidation. Conclusion: Our data suggest that PLE may be effective in protecting oxidative stress-induced damage of prostate, and PLE may be an chemopreventive agent against Fe-NTA-mediated prostate oxidative damage.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.1
• /
• pp.79-90
• /
• 2006

This study was performed to investigate the dietary behaviors and food intake patterns of university students according to the obesity index(OI). The subjects were 349 students(107 males and 242 females) who were assigned to one of the following groups based on the percentage of ideal body weight: underweight(OI< 90%), normal ($90%{\leq}Ol<10%$) and overweight($OI{\geq}110%$). The dietary behaviors and food intake patterns were evaluated by questionnaires and 24 hour recall method. The results were summarized as follows. The rates of underweight, normal, and overweight students were 33.8%, 61.0%, and 5.2% respectively. The ratios of underweight was higher than overweight, especially in case of female. The 60.46% of subjects responded that they had an irregular eating habits, especially in overweight group(72.22%). The 52.44% of subjects showed skipping mealtime more than one time per day. The overweight group had a tendency to overeat themselves than other groups. The normal group had less unbalanced dietary pattern than the other groups(p<0.0019). Most subjects had a snack(96.27%). The percentage of those who drank and smoked were 86.74% and 19.54%, respectively. The smoking value was significantly higher in the overweight group(p<0.0009). The food consumption frequency by food groups was not different among the groups except instant and fast food. More than 50% subjects consumed fish, legumes & its products, and vegetables everyday. There was significantly less rate of the instant and fast food consumption frequency in the normal group(p<0.0177). The 3/4 subjects that showed the lower consumed level in RDA(< 75%) were under-nutritional state in the Fe and Ca. In case of Ca, there was a higher NAR value in the overweight group(p<0.0257) significantly, and Fe, protein, vitamin $B_1$, vitamin $B_2$, and niacin showed similar tendencies. The INQ of Fe was significantly higher in the overweight group than other groups(p<0.0335).