• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1560-1563
• /
• 2009

We fabricated Dye-Sensitized Solar Cells(DSSCs) which are modified by using liquid crystals(LCs) and electro-deposition on cathode electrode in order to apply to flexible DSSCs. We deposited Pt metal layers on ITO electrode through the method of electro-deposition process during low-temperature. We could expect the long-term stability by using ionic liquid(IL) and liquid crystals(LCs). We can also see the enhancement of efficiency through orientation of LCs in gel-state electrolyte using liquid crystals at the DSSCs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.741-744
• /
• 2007

The research applied the processes of spin-coating and thermal-evaporating in proper order to deposit the hole transport material N,N'-Bis(naphthalen-1-yl)- N,N'-bis(phenyl)-benzidine (NPB) on the ITO substrate to make flexible organic light emitting diodes (FOLED) with double hole transport layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.113-119
• /
• 2003

We report the electrical properties of copper(II)-phthalocyanine(Cu-Pc) as a hole injaction layer in organic light-emitting diode (OLED). OLEDs were constructed by the following material structure : indium tin oxaide (ITO)/ CuPc/ triphenyl-diamine (TPD)/ tris-(8-hydroxyquinoline)aluminum (Alq3)/4-(Dicyanomethlene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM)/ Al. we observed that the change of recombination zone by using a DCM detection thin layer (6 ${\AA}$) in a Alq$_3$ emitting layer. layer. Recombination zone was moved toward the cathode as the hole mobility increased due to the heat-treatment temperature of cupc layer increased.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2003

The multi-layered OELDs(organic electroluminescent devices) were prepared on the patterened ITO (indium tin oxide)/glass substrates by the vacuum thermal evaporation method. The $Alq_3$ (tris-(8-hydroxyquinoline)aluminum) low molecule compound was used as the light emission layer. TPD(triphenyl-diamine) and $\alpha-NPD$ were used as the hole transport layer. CuPc (Copper phthalocyanine) was also used as the hole injection layers. In addition, QD2 (quinacridone2) organic material with $10\AA$ thickness was deposited in the $Alq_3$ emission layer to improve the luminance efficiency. The threshold voltage was about 7V for all devices. The luminance and efficiency of devices was improved by substitution the $\alpha-NPD$ for TPD as the hole as the hole transport layer. The luminance efficiency of the OELD sample with QD2 thin film in the $Alq_3$ emission layer was found to be 1.55 lm/W, which is about 8 times larger value compared to the sample without QD2 thin layer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.330-330
• /
• 2009

For the high-performance Quantum dots-Light Emitting Diodes in the near-infrared and visible spectrum, adequate electro- and hole-transporting layers are required. The operation lifetimes of typical materials used in OLEDs are very limited and degraded especially by the oxygen and humid atmosphere. In this work, NiO was selected as a possible hole-transporting layer replacing the TPD film used in QD-LEDs. About 40-nm-thick NiO films have been deposited by the rf-sputtering method on various technical substrates such as FTO/glass, ITO/glass, and ITO/PEN. For the balance of charge carriers and quenching consideration, the resistivity of the deposited NiO films was investigated controlling the oxygen in the sputtering gas. NiO films were fabricated at room temperature and about 6mTorr using pure Ar, 2.5%-, 5%-, and 10%-mixed $O_2$ in Ar respectively. We also investigated the rf-power dependence on NiO films in the range of 80 ~ 200 Watts. The resistivity of the samples was varied from highly conductive to resistive state. Also discussed are the surface roughness of NiO films to provide the smooth surface for the deposition of QDs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.11
• /
• pp.717-721
• /
• 2017

We studied the performance enhancement of organic light-emitting diodes (OLEDs) using 2,3,5,6-fluoro-7,7,8,8-tetracyanoquinodimethane ($F_4-TCNQ$) as the hole-transport layer. To investigate how $F_4-TCNQ$ affects the device performance, we fabricated a reference device in an ITO (170 nm)/TPD(40 nm)/$Alq_3$(60 nm)/LiF(0.5 nm)/Al(100 nm) structure. Several types of test devices were manufactured by either doping the $F_4-TCNQ$ in the TPD layer or forming a separate $F_4-TCNQ$ layer between the ITO anode and TPD layer. N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine (TPD), tri(8-hydroxyquinoline) aluminum ($Alq_3$), and $F_4-TCNQ$ layers were formed by thermal evaporation at a pressure of $10_{-6}$ torr. The deposition rate was $1.0-1.5{\AA}/s$ for TPD and $Alq_3$. The LiF was subsequently thermally evaporated at a deposition rate of $0.2{\AA}/s$. The performance of the OLEDs was considered with respect to the turn-on voltage, luminance, and current efficiency. It was found that the use of $F_4-TCNQ$ in OLEDs enhances the performance of the device. In particular, the use of a separate layer of $F_4-TCNQ$ realizes better device performance than other types of OLEDs.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.110.2-110.2
• /
• 2011

일본 Sanyo 사에 의해서 획기적으로 HIT 태양전지가 개발된 바 있다. 이러한 HIT 태양전지는 기존의 확산-접합 Si 태양전지에 비해서 저비용 고효율의 장점을 갖는다: 22% 이상의 변환효율, $200^{\circ}C$ 이하의 공정온도, 낮은 태양전지 온도 의존도, 높은 개방전압. 한편 Sanyo사의 HIT 태양전지는 n-형 Si 웨이퍼를 이용한 반면에, 최근 미국 National Renewable Energy Laboratory는 p-형 Si 웨이퍼를 이용해서 변환효율 19% 대의 HIT 태양전지를 개발한 바 있다. 그 동안 지속적으로 p-형 Si HIT 태양전지를 고효율화하기(< 22%) 위해서 많은 노력이 진행되어 왔지만 이와 같은 노력에도 불구하고 아직 p-형 HIT는 n-형 HIT 태양전지에 비해서 다소 성능면에서 떨어져 있다. 본 연구는 n- 및 p-형 실리콘 웨이퍼로 구성된 HIT 태양전지의 물리적인 차이점에 초점을 맞추고, 결정 및 비정질 실리콘 층의 역할에 대해서 연구하였다. 특히 태양전지 효율을 향상시키는 요소들로서 결정 실리콘의 불순물 준위(n- 및 p-형) 또는 비저항, 비정질 실리콘으로 구성된 emitter 층, intrinsic 층, 경계면이 고려되었다. 그리고 이러한 요소들이 HIT 태양전지에 미치는 영향을 조사하기 위해서 AMPS-1D 컴퓨터 프로그램을 사용하였고, 이를 통해서 HIT 태양전지의 결정 및 비정질 실리콘 층의 역할을 물리적 정량적으로 분석하였다. 본 연구에 적용되는 HIT는 ITO/a-Si:H(p+)/a-Si:H(i)/c-Si(n)/a-Si:H(i)/a-Si:H(n+) 및 ITO/a-Si:H(n+)/a-Si:H(i)/c-Si(p)/a-Si:H(i)/a-Si:H(p+)의 구조로서 다음과 같은 태양전지 특성을 갖는다: n-형 HIT의 경우, fill factor ~ 0.78, 단락전류밀도 ~ 38.1 $mA/cm^2$, 개방전압 0.74 V, 변환효율 22.3 % (그리고 p-형 HIT의 경우, fill factor ~ 0.76, 단락전류밀도 ~ 36.5 $mA/cm^2$, 개방전압 0.69 V, 변환효율 19.4 %).

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.711-716
• /
• 2010

New electroluminescent polymers with fluoro groups in vinylene units, poly(m-silylphenyl-p-phenylene-difluorovinylene) (m-SiP-PPDFV) have been synthesized by GILCH polymerization. These polymers have been used as the electroluminescent (EL) layers in single layer light-emitting diodes (LEDs) (ITO/PEDOT/polymer/Ca:Al). m-SiP-PPDFV shows PL around $\lambda_{max}$ = 452 nm and green EL around $\lambda_{max}$ = 497 nm. The current-voltage-luminance (I-V-L) characteristics of the polymers show turn-on voltages of 4.0 V approximately. Two fluoro groups were introduced on every vinylene units of m-SiP-PPV to give m-SiP-PPDFV in an attempt to increase the electron affinity of the parent polymer, and the devices show an increased color stability even with vinylene units. The color stability is attributed to the electron-withdrawing effect of the fluoro groups, which protect vinylene units from oxidation in PPV derivatives. We believe that fluoro groups can be introduced in vinylene units in order to attain excellent stability of PPV derivatives.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.490.1-490.1
• /
• 2014

The ZnO nanowire (NW)-based nanogenerators (NGs) can have rectifying current and potential generated by the coupled piezoelectric and semiconducting properties of ZnO by variety of external stimulation such as pushing, bending and stretching. So, ZnO NGs needed to enhance durability for stable properties of NGs. The durability of the metal electrodes used in the typical ZnO nanogenerators(NGs) is unstable for both electrical and mechanical stability. Indium tin oxide (ITO) is used as transparent flexible electrode but because of high cost and limited supply of indium, the fragility and lack of flexibility of ITO layers, alternatives are being sought. It is expected that carbon nanotube and Ag nanowire conductive coatings could be a prospective replacement. In this work, we demonstrated transparent flexible ZnO NGs by using CNT/Ag nanowire hybrid electrode, in which electrical and mechanical stability of top electrode has been improved. We grew vertical type ZnO NW by hydrothermal method and ZnO NW was coated with hybrid silicone coating solution as capping layer to enhance adhesion and durability of ZNW. We coated the CNT/Ag nanowire hybrid electrode by using bar coating system on a capping layer. Power generation of the ZnO NG is measured by using a picoammeter, a oscilloscope and confirmed surface condition with FE-SEM. As a results, the NGs using the CNT/Ag NW hybrid electrode show 75% transparency at wavelength 550 nm and small change of the resistance of the electrode after bending test. It will be discussed the effect of the improved flexibility of top electrode on power generation enhancement of ZnO NGs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.377-377
• /
• 2011

Organic solar cells (OSCs) with low cost have been studied to apply on flexible substrate by solution process in low temperature [1]. In previous researches, conventional organic solar cell was composed of metal oxide anode, buffer layer such as PEDOT:PSS, photoactive layer, and metal cathode with low work function. In this structure, indium tin oxide (ITO) and Al was generally used as metal oxide anode and metal cathode, respectively. However, they showed poor reliability, because PEDOT:PSS was sensitive to moisture and air, and the low work function metal cathode was easily oxidized to air, resulting in decreased efficiency in half per day [2]. Inverted organic solar cells (IOSCs) using high work function metal and buffer layer replacing the PEDOT:PSS have focused as a solution in conventional organic solar cell. On the contrary to conventional OSCs, ZnO and TiO2 are required to be used as a buffer layer, since the ITO in IOSC is used as cathode to collect electrons and block holes. The ZnO is expected to be excellent electron transport layer (ETL), because the ZnO has the advantages of high electron mobility, stability in air, easy fabrication at room temperature, and UV absorption. In this study, the IOSCs based on poly [N-900-hepta-decanyl-2,7-carbazole-alt-5,5-(40,70-di-2-thienyl-20,10,30-benzothiadiazole)] (PCDTBT) : [6,6]-phenyl C71 butyric acid methyl ester (PC70BM) were fabricated with the ZnO electron-transport layer and MoO3 hole-transport layer. Thickness of the ZnO for electron-transport layer was controlled by rotation speed in spin-coating. The PCDTBT and PC70BM were mixed with a ratio of 1:2 as an active layer. As a result, the highest efficiency of 2.53% was achieved.