• ETRI Journal
• /
• 제28권1호
• /
• pp.103-106
• /
• 2006

We have fabricated a planar lightwave circuit (PLC) hybrid-integrated optical sub-assembly of a triplexer using a thin film filter (TFF)-attached wavelength division multiplexer (WDM) and photodiode (PD) carriers. Two types of TFFs were attached to a diced side of a silica-terraced PLC platform, and the PD carriers with a $45^{\circ}$ mirror on which pin-PDs were bonded were assembled with the platform. A clear transmitter eye-pattern and minimum receiver sensitivity of -24.5 dBm were obtained under 1.25 Gb/s operation for digital applications, and a second-order inter-modulation distortion (IMD2) of -70 dBc was achieved for an analog receiver.

• ETRI Journal
• /
• 제29권6호
• /
• pp.811-813
• /
• 2007

We report on a ridge waveguide laser diode with laterally tapered waveguides fabricated in a single growing step using a double patterning method. In this structure, nearly constant output power is obtained with the change of the lower tapered waveguide width, and the facet power ratio of 1.4 to 1.5 is observed over the current range. The asymmetric facet power property is also investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.141-145
• /
• 2006

The possibility of an active-matrix carbon nanotube field emission display (AM-CNT FED) is discussed from the view points of display performance and cost. The critical issues for FED commercialization such as anode acceleration voltage, uniformity, stability and reliability can be solved through our AM-CNT FED technologies.

• 융합보안논문지
• /
• 제14권2호
• /
• pp.35-41
• /
• 2014

유비쿼터스 컴퓨팅 네트워크와 함께 IT 및 ICT 융합 서비스 개발을 통하여 미래 신성장 동력을 발굴하기 위한 정부, 기업 및 학계에서의 관심이 높다. 본 논문에서는 2000년 중반 이후 ICT 융합 키워드에 대한 트렌드 분석을 통하여 일반인들의 이해와 관심도를 측정하고 효율적인 정책 추진 방안을 제시한다. 이를 위하여 융합의 개념과 발전 단계를 짚어보며, 한국정보통신기술협회에서 선정한 ICT융합 서비스들에 대한 검색어를 분석한다. 융합 서비스를 스마트 홈 워크 교통, Health ICT, RFID USN, M2M IoT, e-Navigation, 지능형 로봇으로 분류하여 키워드 트렌드를 분석한 결과, 시간의 흐름에 따라 관심도가 바뀐 서비스와 일정하게 유지되는 서비스들을 알 수 있으며 M2M IoT, 원격진료, 스마트워크, 지능형 로봇 등과 같이 최근에 검색 트렌드가 높은 서비스들과 가전 로봇, Health ICT, 스마트 교통 등과 같은 새로운 개념의 서비스들을 구분할 수 있다. 효율적인 ICT 융합 서비스를 제공하기 위해서는 최신 정보기술의 개발, 표준화 문제, 법 제도 규정의 정비 및 정책 지원과 함께 수요자들의 원하는 맞춤형 ICT 융합 서비스 발굴이 요구된다.

• 센서학회지
• /
• 제28권3호
• /
• pp.157-163
• /
• 2019

The LiDAR sensor, which is widely regarded as one of the most important sensors, has recently undergone active commercialization owing to the significant growth in the production of ADAS and autonomous vehicle components. The LiDAR sensor technology involves radiating a laser beam at a particular angle and acquiring a three-dimensional image by measuring the lapsed time of the laser beam that has returned after being reflected. The LiDAR sensor has been incorporated and utilized in various devices such as drones and robots. This study focuses on object detection and recognition by employing sensor fusion. Object detection and recognition can be executed as a single function by incorporating sensors capable of recognition, such as image sensors, optical sensors, and propagation sensors. However, a single sensor has limitations with respect to object detection and recognition, and such limitations can be overcome by employing multiple sensors. In this paper, the performance of an eight-channel scanning LiDAR was evaluated and an object detection algorithm based on it was implemented. Furthermore, object detection characteristics during daytime and nighttime in a real road environment were verified. Obtained experimental results corroborate that an excellent detection performance of 92.87% can be achieved.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.13-18
• /
• 2016

This paper presents a design of an impedance transformer (IT) with high frequency selectivity characteristics. The frequency selectivity can be controlled by even- and odd-mode impedance of a shunt coupled transmission line (TL). For experimental validation, a 50- to $20-{\Omega}$ IT was implemented at a center frequency ($f_0$) of 2.6 GHz for the long-term evolution signal. The measured results were in good agreement with the simulations, showing a return loss higher than 19 dB over a passband bandwidth of 0.63 GHz (2.28-2.91 GHz) and good sharp frequency selectivity characteristic near to the passband. The series coupled TL provides a transmission zero at 5.75 GHz, whereas the shunt coupled TL provides three transmission zeros located at 2 GHz, 3.1 GHz, and 7.14 GHz.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2021년도 추계학술발표대회
• /
• pp.827-829
• /
• 2021

현대사회의 시설물 중 다수가 콘크리트를 사용하여 건설되었고, 재료적 성질로 인해 균열, 박락, 백태 등의 손상이 발생하고 있고 시설물 관리가 요구되고 있다. 하지만, 현재 시설물 관리는 사람의 육안 점검을 정기적으로 수행하고 있으나, 높은 시설물이나 맨눈으로 확인할 수 없는 시설물의 경우 관리가 어렵다. 이에 본 논문에서는 다양한 영상장비를 활용해 시설물의 이미지에서 균열을 분류하는 알고리즘을 제안한다. 균열 분류 알고리즘은 산업 이상 감지 데이터 세트인 MVTec AD 데이터 세트를 사전 학습하고 L2 auto-encoder를 사용하여 균열을 분류한다. MVTec AD 데이터 세트를 사전학습시킴으로써 균열, 박락, 백태 등의 특징을 학습시킬 수 있을 것으로 기대한다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2021년도 추계학술발표대회
• /
• pp.749-752
• /
• 2021

오늘날 인공지능(Artificial Intelligence, AI) 분야에서 가장 구현하기 어려운 분야 중 하나는 추론이다. 근래 추론 분야에서 영상과 언어가 결합한 다중 모드(Multi-modal) 환경에서 영상 기반의 질의 응답(Visual Question Answering, VQA) 과업에 대한 AI 모델이 발표됐다. 얼마 지나지 않아 VQA 모델의 성능을 개선한 GVQA(Grounded Visual Question Answering) 모델도 발표됐다. 하지만 아직 GVQA 모델도 완벽한 성능을 내진 못한다. 본 논문에서는 GVQA 모델의 성능 개선을 위해 VCC(Visual Concept Classifier) 모델을 ViT-G(Vision Transformer-Giant)/14로 변경하고, ACP(Answer Cluster Predictor) 모델을 GPT(Generative Pretrained Transformer)-3으로 변경한다. 이와 같은 방법들은 성능을 개선하는 데 큰 도움이 될 수 있다고 사료된다.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2009년도 춘계학술대회
• /
• pp.588-592
• /
• 2009

The latest advances in great revolution for digital media and contents industries with Ubiquitous era. Because of spread and supply of various multimedia devices with combination digital with network, we need various type of digital contents. The Digital contents consists of Middleware industries, network business, contents service presenters and users. For supporting digital media. contents and media devices have been converging Digital contents convergence has been proceeding rapidly in media, broadcast and communication field. And also, whole Environment for these industries has been changing, too. Wee need another digital contents convergence for new type of products and services because of convergence of IT and broadcast. In addition, new business trends is very important about these new industrial change and developments with digital contents convergence.

• 대한산업공학회지
• /
• 제42권3호
• /
• pp.209-221
• /
• 2016

As the ICT is an industry which is the basis of the technology convergence, it is the driving force of development for new business opportunities and existing industries. But, most of the existing studies for ICT convergence have identified the trend for convergence in technological terms. So, it is difficult to identify the convergence trend in the subject innovation perspective which leads the innovation activities In the ICT industry. The newly entered companies in the ICT industry are key indicators to identify the convergence trend. They have two specific characteristics that show the wide range of the convergence technology and the application rate of the convergence. Because previous studies did not take into account these two characteristics of the newly entered companies, so it is hard to analyze the exact convergence trend. Therefore, in this paper, we classify the patents for the ICT industry depending on the subject innovation. Then, we deduct the core convergence technology in the ICT industries and application area of the non-ICT industries.