• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.560-567
• /
• 1997

A new approach to obtain stable $W_1/O/W_2$ multiple emulsions has been studied ; The basis of the interfacial interaction between a PCL-PEO-PCL triblock copolymer and a lipophilic emulsifier in the dispersed oil phase was examined. $W_1/O/W_2$ multiple emulsions were prepared by the two-step method. Arlacel P-l35 was used as a liphophilic emulsifier and Synperonic PE/F 127 as a hydrophilic one. Eutanol-G was used as an oil phase. NaCl was encapsulated within the multiple emulsion droplets as the internal marker and its release rate studies were carried out. The suability of the multiple emulsions have been assessed by measuring Separation Ratios(%) and microscopic observations. The release of NaCl was significantly reduced in $W_1/O/W_2$ multiple emulsions containing PCL-PEO-PCL triblock copolymer(2k-4k-2k or 6k-4k-6k) in the oil phase. It may be concluded that the copolymer and the emulsifier form effective interfacial complex to enhance stability and to control the release rate. The effective diffusion coefficients of the NaCl were estimated as $2.64{\times}10^{-15}s$and $3.23{\times}10^{-16}gcm^2/s$ for the $W_1/O/W_2$ multiple emulsion containing 1.2 wt % of PCL-PEO-PCL triblock copolymers with compositions of 2k-4k-2k and 6k-4k-2k, respectively. The rate of release decreased with the increase of the initial concentration of NaCl. The results were examined in view of Higuchi mechanism. A kinetic model which is similar to the model for release of dispersed drugs from a polymeric matrix was found to be suitable for the release of NaCl from $W_1/O/W_2$ multiple emulsions.

• Journal of Plant Biology
• /
• v.35 no.2
• /
• pp.107-116
• /
• 1992

The roles of RNA- and protein-synthesis and $H^{+}$ excretion in 1AA ($10\;\mu\textrm{M}$)-induced elongation were investigated using abraded hypocotyl segments of sunflower (Helianthus annuus L.). The response of elongation initiated about 13 min after IAA treatment. Removal of cuticle, acting as diffusion barrier for inhibitors, by mechanical abrasion of hypocotyl segments enhanced the effect of inhibitors markedly, but the degree of abrasion for the saturated effect of inhibition was different among inhibitors. The elongation induced by 1M was completely inhibited when cycloheximide ($10\;\mu\textrm{M}$) was applied to abraded hypocotyl segments as shortly as 4 min before the onset of the growth response (= 10 min after administration of IAA). Cordycepin ($200\;\mu\textrm{M}$) prevented completely 1AA-induced elongation when applied as shortly as 19 min before the onset of the growth response (=5 min before administration of 1AA). Vanadate (1 mM) inhibited both lAA-induced elongation and medium acidification via lAA-induced $H^{+}$ excretion to apoplast. Cycloheximide and cordycepin also prevented lAA-induced $H^{+}$ excretion strongly. However, inhibition by cycloheximide of lAA-induced elongation was not alleviated by acidifying the cell wall to pH 4.5. The results indicate that, a few minutes before the initiation of growih, protein synthesis is demanded for the initiation of 1AA-induced elongation and the $H^{+}$ excretion to cell wall, and that the H+ excretion, even though it may be necessary for elongation, does not seem to bring about acid growth simply through acidifying cell wall.l wall.

• KDI Journal of Economic Policy
• /
• v.32 no.4
• /
• pp.115-151
• /
• 2010

Recently Korean universities show very rapid increases in both patents and R&D (research and development) expenditures. During the period from 1970 to 2008, university R&D spending has on the average increased 15.3% annually. Along with steady increases in R&D spending, university's research outputs have also continuously increased. In 1990 Korea as a total published 1,613 SCI-level scientific papers and Korean universities applied 27 patents to Korea patent office. In 2008, Korea published more that 35,000 SCI papers and Korean universities applied about 7,300 patents. The growth of scientific articles had begun from the early 1990s whereas the growth of patent has ignited entering the 2000s. The paper tried to investigate university research through the window of patent. Patents lie between invention and innovation and represent the potential value of invention which will be realized at the marketplace. Since Korean patents do not contain citation information, the paper used US patents-NBER patent database-as the main data. The key empirical question is whether Korean university patents granted from USPTO are characteristically different from other Korean patents granted from USPTO. Previous studies on US and Europe show that corporate patents are more stylized in appropriablity of invention, whereas university patents basicness. In case of Korea, the paper confirmed the appropriability characteristic of corporate patents; but the Korean unversity patents are not distinguishable in terms of basicness. The paper estimated the citation frequency function-an empirical model which was firstly developed by Caballero and Jaffe (1993) and later articulated by Jaffe and Trajtenberg (1996, 2002). The model is specified mainly composed of two interacting parts-diffusion effect and obsolescence effect of new ideas or innovations. Estimation results show that differences in forward citations between university and corporate patents are not statistically significant, after controlling self-citation. Since forward citations represent the quality of patents, this estimation result implies that there are no statistically significant quality differences between university and corporate patents. Prior research results, based on the same model of citation frequency function, about US and some European cases show that, in terms of forward citations, university patents are generally superior to corporate patents -for the case of US- or, the former not inferior to the latter-for the case of most of Europe. It is argued that some important and significant policy changes caused the rapid rise of university patents in Korea. Policy changes include the revision of technology transfer act allowing the ownership of publicly-funded research results to researchers and the changes in faculty/professor evaluation which gives more credit to the number of patents. These policy changes have triggered the rapid growth of the number of university patents. The results of the empirical analysis in this paper indicated that Korea now needs to make further efforts to enhance the quality of university patents, not just to produce more numbers of patents.

• Microbiology and Biotechnology Letters
• /
• v.41 no.3
• /
• pp.358-366
• /
• 2013

The aim of this study was to evaluate the antimicrobial activities of Glycyrrhiza uralensis and Glycyrrhiza glabra extracts with various countries of origin. Three samples of licorice with various origins (Korea, China, and Uzbekistan) were evaluated for their antimicrobial activities against six skin microflora. The bioassay applied for determining the antimicrobial effects included the disc diffusion assay, minimum inhibitory concentration, and challenge test. The ethyl acetate fractions of G. uralensis and G. glabra extracts showed significant antimicrobial activities against two gram-positive (Bacillus subtilis, Propionibacterium acnes) and two gram-negative (Escherichia coli, Pseudomonas aeruginosa) bacteria. These samples had much more intensive antimicrobial activities than synthetic preservatives on B. subtilis, P. acnes, and P. aeruginosa, especially. Korean licorice showed the highest antimicrobial activity amongst the samples tested. In view of the observed inhibitory features of these G. uralensis and G. glabra extracts, it is suggested that they could be used as natural antiseptics against bacterial contamination in cosmetics and foods, instead of the common synthetic preservatives currently employed.

• Journal of Life Science
• /
• v.19 no.1
• /
• pp.94-100
• /
• 2009

This study was carried out to examine the antimicrobial effects of grapefruit seed extract (GSE) and processed sulfur solution (PSS) against human skin pathogens: Malassezia furfur, M. restricta, Propionibacterium arnes, Trichophyton mentagrophytes and T. rubrum. The antimicrobial effects of GSE and PSS were tested by agar diffusion method and micro broth dilution method. As the results, the MIC values of GSE against M. furfur, M. restricta, P. acnes, T. mentagrophytes and T. rubrum were 3.91, 3.91, 0.004, 0.024, and $0.012{\mu}l/ml$, respectively. The MIC values of PSS were 0.03, 0.03, 0.156, 0.003, and $0.012{\mu}l/ml$, respectively. Antimicrobial activity of skin care emulsion products containing 0.5% GSE and 0.5% PSS against human skin pathogens were 5.2, 4.3, 8.0, 9.5 and 12.8 mm, respectively. Refractive index, pH, viscosity and color value of skin care emulsions containing GSE and PSS were measured. According to these results, it was concluded that the GSE and PSS were the promising sources of antibacterial agent which could be useful for skin and hair care products as well as for the alternative medicine development in treatment of certain types of skin ailments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.100-101
• /
• 2012

The plasma damage free and room temperature processedthin film deposition technology is essential for realization of various next generation organic microelectronic devices such as flexible AMOLED display, flexible OLED lighting, and organic photovoltaic cells because characteristics of fragile organic materials in the plasma process and low glass transition temperatures (Tg) of polymer substrate. In case of directly deposition of metal oxide thin films (including transparent conductive oxide (TCO) and amorphous oxide semiconductor (AOS)) on the organic layers, plasma damages against to the organic materials is fatal. This damage is believed to be originated mainly from high energy energetic particles during the sputtering process such as negative oxygen ions, reflected neutrals by reflection of plasma background gas at the target surface, sputtered atoms, bulk plasma ions, and secondary electrons. To solve this problem, we developed the NBAS (Neutral Beam Assisted Sputtering) process as a plasma damage free and room temperature processed sputtering technology. As a result, electro-optical properties of NBAS processed ITO thin film showed resistivity of $4.0{\times}10^{-4}{\Omega}{\cdot}m$ and high transmittance (>90% at 550 nm) with nano- crystalline structure at room temperature process. Furthermore, in the experiment result of directly deposition of TCO top anode on the inverted structure OLED cell, it is verified that NBAS TCO deposition process does not damages to the underlying organic layers. In case of deposition of transparent conductive oxide (TCO) thin film on the plastic polymer substrate, the room temperature processed sputtering coating of high quality TCO thin film is required. During the sputtering process with higher density plasma, the energetic particles contribute self supplying of activation & crystallization energy without any additional heating and post-annealing and forminga high quality TCO thin film. However, negative oxygen ions which generated from sputteringtarget surface by electron attachment are accelerated to high energy by induced cathode self-bias. Thus the high energy negative oxygen ions can lead to critical physical bombardment damages to forming oxide thin film and this effect does not recover in room temperature process without post thermal annealing. To salve the inherent limitation of plasma sputtering, we have been developed the Magnetic Field Shielded Sputtering (MFSS) process as the high quality oxide thin film deposition process at room temperature. The MFSS process is effectively eliminate or suppress the negative oxygen ions bombardment damage by the plasma limiter which composed permanent magnet array. As a result, electro-optical properties of MFSS processed ITO thin film (resistivity $3.9{\times}10^{-4}{\Omega}{\cdot}cm$, transmittance 95% at 550 nm) have approachedthose of a high temperature DC magnetron sputtering (DMS) ITO thin film were. Also, AOS (a-IGZO) TFTs fabricated by MFSS process without higher temperature post annealing showed very comparable electrical performance with those by DMS process with $400^{\circ}C$ post annealing. They are important to note that the bombardment of a negative oxygen ion which is accelerated by dc self-bias during rf sputtering could degrade the electrical performance of ITO electrodes and a-IGZO TFTs. Finally, we found that reduction of damage from the high energy negative oxygen ions bombardment drives improvement of crystalline structure in the ITO thin film and suppression of the sub-gab states in a-IGZO semiconductor thin film. For realization of organic flexible electronic devices based on plastic substrates, gas barrier coatings are required to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency flexible AMOLEDs needs an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}gm^{-2}day^{-1}$. The key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required (under ${\sim}10^{-6}gm^{-2}day^{-1}$) is the suppression of nano-sized defect sites and gas diffusion pathways among the grain boundaries. For formation of high quality single inorganic gas barrier layer, we developed high density nano-structured Al2O3 single gas barrier layer usinga NBAS process. The NBAS process can continuously change crystalline structures from an amorphous phase to a nano- crystalline phase with various grain sizes in a single inorganic thin film. As a result, the water vapor transmission rates (WVTR) of the NBAS processed $Al_2O_3$ gas barrier film have improved order of magnitude compared with that of conventional $Al_2O_3$ layers made by the RF magnetron sputteringprocess under the same sputtering conditions; the WVTR of the NBAS processed $Al_2O_3$ gas barrier film was about $5{\times}10^{-6}g/m^2/day$ by just single layer.

• Journal of the Korean Geographical Society
• /
• v.29 no.4
• /
• pp.402-419
• /
• 1994

Telecommunication and intormation technology have been conceived as crucial as well as revolutionary elements for recent and future social and economic development, and their development have led to a spatial reorganization and locational change of economic activities. Information technology has resulted in important changes in the organization structure and location of firm. This study draws attention to the understanding of the relationship between the diffusion of information technology and changes in firm activities with the special reference to the service industry of the United States. Information technology has had a significant impact on the growth and changes of the service industry of the United States through changes in the organizational and employment structure, market structure, and locational changes. The impact of information technology on location changes of the service industry shows two opposite patterns, concentration and decentralization. Among these patterns, the location change in the service industry of the United States reveals predominantly the decentralization tendency such as suburbanization and transfer to lower ranking cities rather than concentration. In case of Korea, however, it is anticipated that the rapid development of information technology may lead to the concentration of the service industry in Seoul and Capital region.

• Journal of Science and Technology Studies
• /
• v.8 no.1
• /
• pp.97-129
• /
• 2008

We are living in the time of high probability of technological risk due to increased rate of technology development and diffusion of new technologies. Resolving uncertainties, the basic attribution of risk, by accumulating knowledge over the risk factors of certain technology is critical to management of technological risk. In many cases of technological risks, high uncertainty of knowledge is commonly mentioned reason for public controversies on risk management. However, the type of technological risk with low social agreement and low uncertainty of knowledge, the main reason for public controversy is absence of social agreement. Public debates on the risks of mobile phones electromagnetic fields(EMF) to human health comes under this category. The knowledge uncertainty on human health effect of mobile phones EMF has been lowered increasingly by accumulating enormous volume of knowledge though scientists have not reached a final conclusion whether it pose a risk to the physical and mental health of the general population or not. In contrast with civil organizations calling for precautionary approach based regulation, the mobile phone industry is cling to the position of no-regulation-needed by arguing no clear evidence to prove health risks of mobile phone EMF has found. In Korea, government set exposure standards based on a measurement called the 'specific absorption rate'(SAR) and require the mobile phone industry to open SAR information to the public by their own decision. From the view of pro-regulation side based on precautionary approach, technology risk managament of mobile phones EMF in Korea is highly limited and formalized one with limited measuring of SAR on head part only and problematic self-regulated opening of information about SAR to the public. As far as the government keeps having priority on protecting interest of mobile phone industry over precautionary regulation of mobile phones EMF, the disagreement between civil organizations and the government will not resolved. The risk of mobile phones EMF to human health have high probability of being underestimated in the rate and damage of risk than objectively estimated ones due to familiarity of mobile phone technology. And this can be the cause of destructive social dispute or devastating disaster. To prevent such disastrous results, technology risk management, which integrating the goals of safety with economic growth in public policy and designing and promoting risk communication, is required.

• Membrane Journal
• /
• v.9 no.4
• /
• pp.230-239
• /
• 1999

Perchlorate ion-selective electrodes in PVC membranes that respond linearly to concentration 106 M were developed by incorporating the quaternary phosphonium salts as a canier. The effects of the chemical structure, the contents of canier, the kind of plasticizer and the membrane thickness on electrode characteristics such as the electrode slope, the linear respone range and the detection limit were studied. With this results, the detectable pH range, selectivity coefficients and AC impedance characteristics were compared and investigated. The perchlorate ion substituents of the quaternary phosphonium salts like tetraoctylphosphonium perchlorate (TOPP) , tetraphenylphosphonium perchlorate(TPPP), and tetrabutylphosphonium perchlorate(TBPP) as a canier were used. The electrode characteristics were better in the ascending order of TBPP < TPPP < TOPP, with the increase of carbon chain length of the alkyl group. Dioctylsebacate(OOS) was best as a plasticizer, the canier contents were better with 11.76 wt% and the optimum membrane thickness was 0.19 mm. Under the above condition, the electrode slope was 56.58 mV/$^P{ClO}_4$,the linear response range was $10^{-1}$\times$10^{-6}$ M, the detection limit was 9.66 x $10^{-7}$ M. The performance of electrode was better than Orion electrode. The electrode potential was stable within the pH range from 3 to 11. The order of the selectivity coefficients for the perchlorate ion was sol < F < Br < 1. With the result of impedance spectrum, it was found that the equivalent circuit for the electrode could be expressed by a series combination of solution resistance, parallel circuit consisting of the double layer capacitance and bulk resistance and Warburg impedance. And solution resistance was almost not appeared and Warburg impedance was highly appeared by diffusion. Then Warburg coefficient was 1.32$\times$$10^74 $\Omega$ $\cdot$ ${cm}^2/s^{1/2}$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.12
• /
• pp.715-732
• /
• 2009

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2008. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends in thermal and fluid engineering have been surveyed in the categories of general fluid flow, fluid machinery and piping, new and renewable energy, and fire. Well-developed CFD technologies were widely applied in developing facilities and their systems. New research topics include fire, fuel cell, and solar energy. Research was mainly focused on flow distribution and optimization in the fields of fluid machinery and piping. Topics related to the development of fans and compressors had been popular, but were no longer investigated widely. Research papers on micro heat exchangers using nanofluids and micro pumps were also not presented during this period. There were some studies on thermal reliability and performance in the fields of new and renewable energy. Numerical simulations of smoke ventilation and the spread of fire were the main topics in the field of fire. (2) Research works on heat transfer presented in 2008 have been reviewed in the categories of heat transfer characteristics, industrial heat exchangers, and ground heat exchangers. Research on heat transfer characteristics included thermal transport in cryogenic vessels, dish solar collectors, radiative thermal reflectors, variable conductance heat pipes, and flow condensation and evaporation of refrigerants. In the area of industrial heat exchangers, examined are research on micro-channel plate heat exchangers, liquid cooled cold plates, fin-tube heat exchangers, and frost behavior of heat exchanger fins. Measurements on ground thermal conductivity and on the thermal diffusion characteristics of ground heat exchangers were reported. (3) In the field of refrigeration, many studies were presented on simultaneous heating and cooling heat pump systems. Switching between various operation modes and optimizing the refrigerant charge were considered in this research. Studies of heat pump systems using unutilized energy sources such as sewage water and river water were reported. Evaporative cooling was studied both theoretically and experimentally as a potential alternative to the conventional methods. (4) Research papers on building facilities have been reviewed and divided into studies on heat and cold sources, air conditioning and air cleaning, ventilation, automatic control of heat sources with piping systems, and sound reduction in hydraulic turbine dynamo rooms. In particular, considered were efficient and effective uses of energy resulting in reduced environmental pollution and operating costs. (5) In the field of building environments, many studies focused on health and comfort. Ventilation. system performance was considered to be important in improving indoor air conditions. Due to high oil prices, various tests were planned to examine building energy consumption and to cut life cycle costs.