• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.94-103
• /
• 2003

In case of environment requiring safety such as human body and requiring flexible shape, a conventional mechanical actuator system does not satisfy requirements. Therefore, in order to solve these problems. a research of various smart material such as EAP (Electro Active Polymer), EAC (Electro Active Ceramic) and SMA (Shape Memory Alloy) is in progress. Recently, the highest preferring material among various smart material is EP (Electrostictive Polymer), because it has very fast response time, powerful force and large displacement. The previous researches have been studied properties of polymer and simple control, but present researches are studied a polymer actuator. An EP (Electostrictive Polymer) actuator has properties which change variably ils shape and environmental condition. Therefore, in order to coincide with a user's purpose, it is important not only to decide a shape of actuator and mechanical design but also to investigate a efficient controller. In this paper, we constructed the control logic with an adaptive fuzzy algorithm which depends on the physical properties of EP that has a dielectric constant depending on time. It caused for a sub-actuator to operate at the same time that a sub-actuator system operation increase with a functional improvement and control efficiency improvement in each actuator, hence it becomes very important to manage it effectively and to control the sub-system which Is operated effectively. There is a limitation on the management of Main-host system which has multiple sub-system, hence it brings out the Multi-Vehicle Control process that disperse the task efficiently. Controlling the multi-dispersion system efficiently, it needs the research of Main-host system's scheduling, data interchange between sub-actuators, data interchange between Main-host system and sub-actuator system, and data communication process. Therefore in this papers, we compared the fuzzy controller with the adaptive fuzzy controller. also, we applied the scheduling method for efficient multi-control in EP Actuator and the algorithm with interchanging data, protocol design.

• 한국가스학회지
• /
• 제16권4호
• /
• pp.8-15
• /
• 2012

GO-FLOW기법은 시스템이 정상적으로 작동할 가능성을 평가할 수 있는 기법으로써 신호선과 연산자를 사용하여 시스템을 GO-FLOW Chart로 모델화하고, 이 GO-FLOW Chart를 순차적으로 해석하여 시스템의 신뢰도를 평가하는 기법이다. 그러나 GO-FLOW기법은 1개의 시스템 구성요소를 여러 개의 연산자로 모델링하므로 시스템 흐름도와 상이한 GO-FLOW Chart가 작성될 수 있고, 시간점을 지정하여 시간을 모델링하므로 실제 운전시간에 따른 신뢰도 변화를 평가하기 어렵다. 따라서 본 연구에서는 구성요소의 기능(정상/고장)을 기준으로 시스템의 신뢰도를 평가하는 기법을 개발하였다. 본 기법은 구성요소의 운전상태와 상관없이 그 기능을 유지할 가능성을 기준으로 시스템의 신뢰도를 평가하며, 1개의 구성요소는 1개의 연산자로 모델링하므로 시스템 흐름도와 거의 유사한 모델도를 작성할 수 있고, 실제시간을 반영한 연산자를 사용하여 실제시간에 따른 시스템의 신뢰도를 쉽게 평가할 수 있다.

• 비교문화연구
• /
• 제27권
• /
• pp.291-317
• /
• 2012

Until now, the 'Ie' system, the distinct Japanese Family system, was dominantly recognized as the vestige of former feudal system. But as the research for gender-especially the family history-gets active, various aspects showing that 'Ie' is the modern product developed through thoroughly intended plans of Meiji government after latter-day. According to Ueno Chizuko, 'Ie' system is not at all a traditional feudal system, but it rather is the family revised by modernization, in other word, it is the Japanese version of modern family. This words began with it being the study of goodwill, and recognizing that 'Ie' is the creation of modernization, and as well as the need to listen to the new woman's inner voice under the Japanese patriarchal system. The most appealing characteristic of modern Japanese patriarchal system is that the it needs only the family members who are dedicated to the 'Nation'. With this, women were expected to submit to the authority and their roles, which are, as a wife and mother who obeys by supporting, preserving, and maintaining the patriarchal system. But as the new women themselves expressed their independence, these roles are hard to be expected. It was no other than new women's magazine Seito which arose against the Japanese patriarchal system. In this statement, careful observation was done on the novel based on tiny internal conflicts or the aspects of anguish, that could not have been illustrated enough after judging the significant issues of early modern liberalism of women based on new women's editorials, discussions, that were illustrated most directly and compressively. Through this, it was pointed out that Seito magazine is not consisted logically, and that reason for that is the female authors' different desires were tangled and it reflects the complicated situation of that period whether they were intended or not. Overall, unlike the literatures (men-centered) of same era, the genre of literature or the novel did not put them on prerogative place, and confirmation could be made once again that the women's writing aspects are related closely with gender recognition more than anything.

• Asia pacific journal of information systems
• /
• 제25권3호
• /
• pp.445-472
• /
• 2015

Although knowledge transfer between two different parties occurs in IS development projects, the majority of prior studies focused on knowledge transfer from IT consultants to clients. Considering two parts of knowledge transfer in IS development projects, we must consider both 'where knowledge is transferred from' and 'where it is transferred to'. Therefore, in this study, we attempt to describe two different routes of knowledge transfer, such as knowledge transfer from an IT consultant to a client and knowledge transfer from a client to an IT consultant. In this regard, we have examined the effect of two different routes of knowledge transfer on system implementation success in IS development project. Specifically, we adopted the knowledge stock-flow theory to examine the causal relationship between IT consulting firms and clients in terms of knowledge transfer and eventual system implementation success. Survey data collected from 213 pairs of individuals (both clients and IT consultants) were used to test the model using three different analytic approaches such as PLS (partial least squares) and two types of mediated regression techniques. We found that knowledge transfers partially mediated both the relationships between IT consultants' IT skills (project members' business knowledge) and system implementation success. Furthermore, the effects of each knowledge transfer were distinguished by depending on the types of system, such as ERP or groupware. Our attempts have significant implications for both research and practice given the importance of effective knowledge transfer to IT consulting.

• 상하수도학회지
• /
• 제23권3호
• /
• pp.295-303
• /
• 2009

In the present study, a reliability analysis calculating the probability of system failure has been performed using cut set and results of numerical analysis for unsteady flow in pipe. Especially, the probability of system failure has been evaluated regarding the effect of valve closure which is a really important activity in operation of piping system. In spite of small amount of demand, it was found that fast valve closure can generate high probability of system failure. Furthermore, it was confirmed that surge tank can reduce the unsteady effects and probability of system failure in water distribution system. From the results, it was found that the unsteady flow has a significant effect on the probability of system failure Furthermore, it was able to find which pipe or cut set has high probability of system failure. So it could be used to determine which pipe or cut set has a priority of repair and replacement. Therefore, reliability analysis regarding unsteady flow has to be performed for the planning, designing, maintenance, and operation of piping system.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.859-864
• /
• 2015

This paper analyzes the impact of Plug-in Electric vehicles(PEVs) on power demand and voltage change when PEVs are connected to the domestic distribution system. Specifically, it assesses PEVs charging load by charging method in accordance with PEVs penetration scenarios, its percentage of total load, and voltage range under load conditions. Concretely, we develop EMTDC modelling to perform a voltage distribution analysis when the PEVs charging system by their charging scenario was connected to the distribution system under the load condition. Furthermore we present evaluation algorithm to determine whether it is possible to adjust it such that it is in the allowed range by applying ULTC when the voltage change rate by PEVs charging scenario exceed its allowed range. Also, detailed analysis of the impact of PEVs on power distribution system was carried out by calculating existing electric power load and additional PEVs charge load by each scenario on new-town in Korea to estimate total load increases, and also by interpreting the subsequent voltage range for system circuits and demonstrating conditions for countermeasures. It was concluded that total loads including PEVs charging load on new-town distribution system in Korea by PEVs penetration scenario increase significantly, and the voltage range when considering ULTC, is allowable in terms of voltage tolerance range up to a PEVs penetration of 20% by scenario. Finally, we propose the charging capacity of PEVs that can delay the reinforcement of power distribution system while satisfying the permitted voltage change rate conditions when PEVs charging load is connected to the power distribution system by their charging penetration scenario.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1777-1783
• /
• 2013

This study aims to implement an instrumentation system measuring and analysing real-time data of information flow between respective subunits composing train control system as the performance evaluation method for wireless communication based urban railway train control system under development for a Korean model. It analyses system functional requirements regarding subsystems composing wireless communication based train control system and test items for functions presented in each specification and examines data and measurement point for measuring according to test items in order to implement an instrumentation system. And, it clearly defines requirements of an instrumentation system to avoid malfunction or error in operation of train control system. It reviews data processing method and display method for effective analysis of data flow between respective subunits with measured data, designs and makes an instrumentation system. Ultimately, it applies to a performance test of train control system and makes sure an instrumentation system in normal working order.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2517-2526
• /
• 2011

As technologies are developed and systems are complicated, hazards embedded in the system are also increasing. proving safety and managing the safety is more scientific and organizational domain so that safety management system is pursuing to be active formation detecting the factors of hazard and managing them beyond passive-way. In the future, in order to establish and manage national safety management system, it is important to have effective system and manage it and also more important that all the people related to target system has to change their recognition and to play roles in it.

• 한국인공지능학회지
• /
• 제9권2호
• /
• pp.23-28
• /
• 2021

In this paper, we studied a system that can efficiently build security management for single-person households using Arduino, ESP32-CAM and PIR sensors, and proposed an Android app with an internet connection. The ESP32-CAM is an Arduino compatible board that supports both Wi-Fi, Bluetooth, and cameras using an ESP32-based processor. The PCB on-board antenna may be used independently, and the sensitivity may be expanded by separately connecting the external antenna. This system has implemented an Arduino-based Unauthorized intrusion system that can significantly help prevent crimes in single-person households using the combination of PIR sensors, Arduino devices, and smartphones. unauthorized intrusion system, showing the connection between Arduino Uno and ESP32-CAM and with smartphone applications. Recently, if daily quarantine is underway around us and it is necessary to verify the identity of visitors, it is expected that it will help maintain a safety net if this system is applied for the purpose of facial recognition and restricting some access. This technology is widely used to verify that the characters in the two images entered into the system are the same or to determine who the characters in the images are most similar to among those previously stored in the internal database. There is an advantage that it may be implemented in a low-power, low-cost environment through image recognition, comparison, feature point extraction, and comparison.

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.125-133
• /
• 2004

Greeting the globalization and information period of 21C, the improvement of the distributional system structure and modernization of publishing distribution are the seriously required periodic assignments for the publishing industry that is a national knowledge and culture industry to be equipped with the core competitiveness. First, it is to found a large distributional organization that is able to provide total logistics services in time that is essential to the publishing company and bookstore. Second, it is to have a logistics service to act up to the variable requirements of customers such as publishing companies and bookstores under the rapidly changing distribution environment. Third, it is to provide the standardized information of publishing distribution. It is needed to establish a total distributional center in collaboration to satisfy the requirements of publishing industry as above. By doing this work, structure of the publishing distribution system can be improved and its constitution can be strengthen, and it is possible not only to construct a stable supply system but also to realize an information-based system in the publishing industry with the construction of information system and its utilization. Furthermore, the application of RFID in the publishing distribution is essentially required to provide the symbolic model and logistics infrastructure into the 'Paju publishing culture information industrial complex'. It could be possible by growing the international recognition regarding distribution environment and strengthening the international competitiveness in the period of the ""Open door".