• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.168-174
• /
• 2011

Various La-based perovskite catalysts were prepared by a Pechini method, and they were applied to the low-temperature oxidation of odor compounds exhausted from waste food treatment process for effective deodorization. Quantitative and qualitative analyses of exhausted gas were conducted to measure the amount of major odor compounds with respect to operation time. A standard odor sample composed of major odor compounds was then prepared for use as a feed for oxidation reaction system. Various transition metal(M)-substituted La-based perovskite catalysts ($LaMO_{3}$: M=Cr, Mn, Fe, Co, and Ni) were prepared and applied to the oxidation of odor compounds in order to investigate the $LaNiO_3$ catalyst showed the best catalytic performance. Pt-substituted perovskite catalysts ($LaNi_{1-x}Pt_{x}O_{3}$: x=0, 0.03, 0.1, and 0.3) were then prepared for enhancing the catalytic performance. It was found that $LaNi_{0.9}Pt_{0.1}O_{3}$ catalyst served as the most efficient catalyst. Supported perovskite catalysts ($XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$: X=perovskite content(wt%), 0, 10, 20, 30, 40, 50, and 100) were finally applied for the purpose of maximizing the catalytic performance of perovskite catalyst in the low-temperature oxidation reaction. Catalytic performance of $XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ catalysts showed a volcano-shaped curve with respect to perovskite content. Among the catalysts tested, $20LaNi_{0.9}Pt_{0.1}O_{3}$/$Al_{2}O_{3}$ catalyst exhibited the highest conversion of odor compounds of 88.7% at $180^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.145-156
• /
• 1997

ZrO2 phase transformations depending on the type and amount of dopants and the sintering temperatures were studied for the 2 components (CaO-, Y2O3-, MgO-ZrO2) and the 3 components(MgO-ZrO2-Al2O3)ZrO2 powder by X-ray diffraction and Raman spectroscopy. In the CaO- and Y2O3-ZrO2 systems, as the CaO and Y2O3 contents increased to 6~15mol% and 3~15mol% respectively, we were not able to identify between tetragonal and cubic in the X-ray diffraction patterns. On the other hand, all Raman modes shifted to lower wavenumbers, decreasing in intensity and the number of bands, markedly. These phenomena were caused by tetragonallongrightarrowcubic phase transformation and interpreted by the breakdown of the wave vector selection rule(k=0) and the structural disorder associated with the formation of oxygen sublattice which was caused by the substitution between Zr4+ ion and Ca2+ or Y3+ ion in ZrO2 matrix. The monoclinic to cubic phase transformation occurred in 10mol% MgO-ZrO2 system. As the Al2O3 content increased from 0 to 20mol% in the MgO-ZrO2-Al2O3 systems, cubic phase transformed to monoclinic phase, this is because the MgO didn't play a role in a stabilizer because of the formation of the spinel(MgAl2O4) by the reaction between MgO and Al2O3, Also, the ZrO2 phase transformation was explained by the change of it's lattice parameters depending on the type and amount of dopants. Namely, as the amount of dopant increased to 10~13mol%, the axial ra-tio c/a came close to unity with increasing the lattice parameter a and decreasing the lattice parameter c. At that time, the tetragonallongrightarrowcubic phase transformation occurred.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.395-400
• /
• 2004

The effects of compositions of binders on the rheological properties of mixtures and the preparation conditions on the formation of defects and the debinding characteristics of compacts for the injection molding of ceramic powders (65 wt% aluminaㆍ35 wt% feldspar) were studied. Ceramic powders were coated with 2 wt% of stearic acid and then mixed with 15, 20, and 25 wt% of Paraffin Wax (PW) and High Density Polyethylene (HDPE) as binders at $160^{\circ}C$ for 2 h. Rheological properties were investigated by using capillary rheometer. Apparent viscosities of mixtures were 80∼300 Paㆍs at 1,000$s^{-1}$ of a shear rate, it was good for the injection molding and depending on the compositions of binders. Short shot was formed at 15H5P5 (the ratio of HDPE : PW=5 : 5 in 15 wt% of binders) compacts without injection pressures and any noticeable defects were not formed at 45 kgf/$cm^{2}$ in 20H5P5 compacts. PW and HDPE were removed by the solvent extraction and thermal debinding method. Thermal debinding of HDPE at $450^{\circ}C$ for 5 h, which followed the extraction of PW was using n-heptane solvent at $70^{\circ}C$ for 5 h. Continuous pores in compacts, which facilitate the removal of HDPE by the thermal debinding, were found to form in the compacts when PW was removed by the solvent extraction. The optimum composition of binder at which binder was removed by thermal debinding without defects while maintaining the compact strength was 20H5P5. Bulk density, porosity and 3-point bending strength of 20H5P5 compact sintered at 1,30$0^{\circ}C$ for 5 h were 2.8, < 3%, and 2,400 kgf/$cm^{2}$, respectively, and can be used as a structural materials.

• KDI Journal of Economic Policy
• /
• v.13 no.2
• /
• pp.141-161
• /
• 1991

Resale price maintenance has long been employed in book distribution, perhaps longer than for any other product. Another unusual practice in the book trade that has proven to be quite durable in spite of its substantial cost in real resources is the returns policy. Publishers typically grant the right to return unsold books within a stipulated time for full credit against future orders. This paper investigates the functions and effects of resale price maintenance in the book trade, and argues that resale price maintenance and returns are substitute methods of providing the same economic function. Resale price maintenance can be used to compensate booksellers for initially stocking books with uncertain prospects and for providing a conduit through which manufacturers acquire information about consumer demand (market testing services). Permitting the return of unsold books for full credit places a floor under retail prices and transfers a considerable portion of the cost of introducing a new product line back to the publisher. Both reflect publishers' needs to have their books displayed. In the U.S. returns privileges were first proposed in 1913, roughly coincident with the Macy decision outlawing RPM. Publishers slowly granted return privileges, which become nearly universal by 1970. The decline in margins in recent years has been accompanied by an increase in returns as the return policy served to substitute for lost margins on successful titles as a methods of compensating full-line booksellers. In contrast, returns privileges are unusual in countries where price maintenance in books has been practiced. These observations are consistent with our analysis. In Korea, resale price maintenance of books is practiced under an exception to Korean antitrust law. The availability of effective price maintenance is likely to reduce the use of returns programs. Since consumers prefer to obtain books at outlets where they know the books are likely to be stocked rather than taking a chance on stores that carry a more limited line, it also provides a strong incentive for booksellers to expand. But the privilege of resale price maintenance should be confined to books which publishers want to be price maintained. Resale price maintenance and returns system differ in the transactions costs associated with inventory holding, and publishers' judgement on the comparative advantage of the two schemes should be honored. Publishers should also remain free to authorize sales at discount at any time not to impair the ability of booksellers to dispose of product variants that prove unpopular.

• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.109-124
• /
• 2015

A novel approach, hybrid surface rainfall (KNU-HSR) technique developed by Kyungpook Natinal University, was utilized for improving the radar rainfall estimation. The KNU-HSR technique estimates radar rainfall at a 2D hybrid surface consistings of the lowest radar bins that is immune to ground clutter contaminations and significant beam blockage. Two HSR techniques, static and dynamic HSRs, were compared and evaluated in this study. Static HSR technique utilizes beam blockage map and ground clutter map to yield the hybrid surface whereas dynamic HSR technique additionally applies quality index map that are derived from the fuzzy logic algorithm for a quality control in real time. The performances of two HSRs were evaluated by correlation coefficient (CORR), total ratio (RATIO), mean bias (BIAS), normalized standard deviation (NSD), and mean relative error (MRE) for ten rain cases. Dynamic HSR (CORR=0.88, BIAS= $-0.24mm\;hr^{-1}$, NSD=0.41, MRE=37.6%) shows better performances than static HSR without correction of reflectivity calibration bias (CORR=0.87, BIAS= $-2.94mm\;hr^{-1}$, NSD=0.76, MRE=58.4%) for all skill scores. Dynamic HSR technique overestimates surface rainfall at near range whereas it underestimates rainfall at far ranges due to the effects of beam broadening and increasing the radar beam height. In terms of NSD and MRE, dynamic HSR shows the best results regardless of the distance from radar. Static HSR significantly overestimates a surface rainfall at weaker rainfall intensity. However, RATIO of dynamic HSR remains almost 1.0 for all ranges of rainfall intensity. After correcting system bias of reflectivity, NSD and MRE of dynamic HSR are improved by about 20 and 15%, respectively.

• Journal of the Korean earth science society
• /
• v.32 no.4
• /
• pp.388-401
• /
• 2011

Asian dust was observed a total of 66 times in the springtime during the period from 2002 to 2010, with 26 cases in March, 23 cases in April and 17 cases in May. This study investigates a Asian dust episode that occurred during the period from 22 to 25 May 2010, based on synoptic weather patterns, wind vector at 850 hPa, relative humidity at 1000 hPa, Jet streams and wind vector at 300 hPa, PM10 concentration in Korea and satellite imagery. In this case, Asian dust originated on 22 May along the rear of a developing low pressure system in Mongolia. The Asian dust was then transported southeastward and bypassed the Korea peninsula from 23 to 24 May, before reaching Japan on 25 May. Jet streams on 24 May bypassed the Korean peninsula and induced the development of a surface low pressure centered over the peninsula. The resulting air flow was critical to the trajectory of the Asian dust, which likewise bypassed the Korean peninsula. 72-hour backward trajectory data reveal that the Shandong Peninsula and the East China Sea were the points of origin for the air flows that swept through the Japanese sites where Asian dust was observable to the naked eay. The Asian dust pathway is ascertained by horizontal distribution of the Asian dust of RGB imagery from MODIS satellites which captured the Asian dust moving over the Shandong Peninsula, the East China Sea, and northwest of the Kyushu region in Japan. Since the synoptic pattern and the transport way of the Asian dust case are far from typical ones, which Asian dust forecasting technique has long been based on, this study can be good example of exceptional Asian dust pattern and it will be used for more accurate Asian dust forecasting.

• Journal of the Korean earth science society
• /
• v.41 no.1
• /
• pp.19-30
• /
• 2020

To understand the impact of typhoons on Gamji gravel beach Taejongdae in Busan, we carried out beach profiling using a VRS-GPS system and a Drone photogrammetry for the typhoons 'Kong-rey' invaded in October 2018 and 'Danas' in July 2019. In addition, grain sizes are analyzed to investigate the overall distribution pattern of gravels on the beach, and the beach topography is surveyed periodically to confirm the recovery rate of the beach. Grain-size analysis reveals that mean gravel sizes, in general, become finer from -6.2Φ to -5.4Φ towards the east in the seashore line direction. Variation in mean sizes is obviously observed in the cross-shore direction. Gravels in the swash zone are relatively fine about -4.5Φ in size and equant in shape, whereas the coarse and oblate gravels ranged from -5Φ to -6Φ are found in the berm. Gamji gravel beach particularly has two lines of berms: a lower berm situated facing beach and an upper berm about 10 m landward. After the typhoon Kong-rey passed by, about 1.4 m of severe erosion in upper berm occurred, and the berm eventually disappeared. On the backshore of the upper berm about 50 cm of erosion took place so that the elevation became lower. However, tangible erosion was not observed in the lower berm. When typhoon Danas hit, rated as mild storm, both upper and lower berm were eroded out. However, about 50 cm of deposition occurred only in the backshore. Only three days later, the new lower berm was formed, meaning that sedimentation rate must be high. This result indicates that Gamji gravel beach is recovered very fast from erosion caused by the typhoons when it is under the fair-weather condition even though beach morphology changes dramatically in a short period of time. Gravel beach is estimated to be or evaluated very resilient to typhoon erosion.

• Journal of Korean Society of Forest Science
• /
• v.107 no.1
• /
• pp.96-107
• /
• 2018

This study analyzed the linkage between the Forestry sector Official Development Assistance (ODA) Project in South Korea and the Sustainable Development Goals (SDGs) of United Nations (UN), Suggested direction of ODA project focusing on the implementation of the SDGs. Forestry sector ODA project data in South Korea have collected from Economic Development Cooperation Fund (EDCF) statistical inquiry system developed by The Export-Import Bank of Korea. According to the analysis result, Forestry sector ODA project in South Korea have been actively implemented in the fields of forestry development, forestry policy and administration. In both fields, Korea Forest Service and Korea International Cooperation Agency (KOICA) carried out the most projects. The Forestry sector ODA project data in South Korea are classified technical development, capacity building, construction of infrastructure and afforestation based on their objectives and contents. SDGs emphasizes the importance of national implementation assessment and this study analyze linkage between ODA activity content in each classification item and 2016 Korea Forest Service Performance Management Plan indicator. Analyzed the 2016 Korea Forest Service Performance Management Plan indicator and SDGs target and SDGs indicator were identified. finally, SDGs goals were recognized. In conclusion, Forestry sector ODA project in South Korea are associated with the SDGs Goal 1 (No Poverty), Goal 2 (Zero Hunger), Goal 6 (Clean Water and Sanitation), Goal 13 (Climate Action), Goal 15 (Life on Land) and Goal 17 (Partnership for The Goals). Therefore, With the launch of the SDGs, This study analyzed the linkage among the Forestry sector ODA Project in South Korea, the 2016 Korea Forest Service Performance Management Plan and the SDGs. it presented the limitations of Forestry sector ODA Project in South Korea and made proposals for the implementation of the SDGs.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.3
• /
• pp.277-284
• /
• 2006

Background : Delayed treatment of pulmonary tuberculosis is an important problem because it results in greater mortality and the nosocomial transmission of tuberculosis. This study was conducted to analyze the factors that contribute to the delayed treatment of pulmonary tuberculosis in a university hospital and we wanted to provide basic data for instituting an effective management program for tuberculosis. Methods : we retrospectively reviewed the medical records of 155 patients with smear-positive or culture-positive pulmonary tuberculosis and who were treated between May 1999 and October 1999. A case-control study was performed to analyze the factors. We then tried to follow up the patients in delayed treatment group via telephone for the purpose of assessing the therapeutic interventions. Results : Among 150 patients, 55 (37%) were included in the delayed treatment group. The factors associated with delayed treatment on the univariate analysis included age (61 vs 40 years old; p <0.001), a smear-negative sputum test for acid-fast bacilli (AFB) (85% vs 55%; p <0.001) and no visits to a private clinic before the patient presented to the university hospital (56% vs 36%; p = 0.014). Multivariate analysis revealed that old age (p = 0.001), a smear-negative sputum for AFB (p = 0.001), and lower lobe infiltrate on chest X-ray (p = 0.041) were the independent predictors of delayed treatment. Of the 22 patients who did not receive any treatment, 20 of them 91%) consented to our suggestion of revisiting the hospital. Conclusion : Delayed treatment of patients with pulmonary tuberculosis is not uncommon in a university hospital. Old age, smear-negative for AFB, and lower lobe infiltrate on chest X-ray are the risk factors for delayed treatment. A more systematic management system is required for achieving better control of tuberculosis.

• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.1
• /
• pp.48-54
• /
• 2007

Purpose: To evaluate clinical results of the tumor prosthetic replacement for pathologic fracture of the proximal femur with extensive bony destruction due to metastatic bone tumors. Materials and Methods: From 2005 October to 2006 October, resection of proximal femur and tumor prosthesis replacement was performed for metastatic bone tumors extensively involving trochanteric area in 6 patients. The mean age of overall patients was 61(range, 48~77). Mean clinical follow up was 10.5 months (range, 6~16). Primary tumor consisted with multiple myeloma in 2 patients, lung cancer in 1, breast cancer in 1, transitional cell carcinoma of the renal pelvis in 1, unknown origin in 1 patient. $MUTARS^{(R)}$ proximal femur (Implantcast, Munster, Germany) were used in all cases. The functional evaluation in the lower extremities was performed with Musculoskeletal Tumor Society 1993 scores. The degree of pain relief after surgical treatment was assessed with Visual Analogue Scale (VAS). Results: At the final follow up, all of the patients survived. The mean lower extremities functional score of Musculoskeletal Tumor Society 1993 was 17.8(59.3%)(range, 12~25). VAS was improved to 2.5 from 8.5 after the surgical treatment. Ambulation was encouraged as soon as possible and mean duration after surgery for ambulation was 7.3(range, 3~16) days. Post-operatively, there was no surgical infection, periprosthetic fracture or loosening. Dislocation occurred in one out of six cases. Conclusion: Resection of proximal femur and tumor prosthesis replacement for metastatic bone tumors around proximal femur extensively involving trochanteric area seems to be safe procedure in view of post-operative complication, and effective for functional restoration as well as pain relief. Thus, it is accordant to the treatment principle of the metastatic bone tumors.