• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.119-126
• /
• 2017

This study examined the soundness, vibration, and size of ambulances currently used in Korea as well as the comfort and convenience of ambulancesin Korea. The target vehicles were measured and investigated using the currently used freight type, van type, and Benz ambulance. Currently, the ambulance standards in Korea have only formal production standards, and there is no regulation on safety for ambulances, space regulation for first aid, comfort, and convenience. Therefore, comparative experiments on the comfort and convenience were measured using noise and vibration measurement experiments, and research was conducted on the size and interior rearrangement of ambulances to investigate the areas that can improve the comfort and convenience. The noise measurementsshowed that the noise was large in the order of the van type, Benz type, and freight type. In the case of a speed of 40 km/h or more, the noise measurement result was 60 to 70 dB or more. In the case of vibration, the Benz type and van type ambulance were good, and the vibration of the freight type showed the worst result, highlighting the need for improvement. Lastly, it is not possible to increase the internal size of the structure of domestic ambulance. On the other hand, it is important that through ambulance relocation and the position of first aid personnel, it will be possible to use it more comfortably and conveniently.

• Korea Journal of Hospital Management
• /
• v.10 no.1
• /
• pp.71-92
• /
• 2005

The purpose of this study is to analyze the efficiency in management of general hospitals and investigate the major factors on efficiency. Specifically, the management of each general hospital is evaluated by using Data Envelopment Analysis(DEA) technique which is a nonparametric statistical method for measurement of efficiency. Then, the influencing factors are investigated through analyses of Decision-Tree Model and Tobit Regression. The target hospitals were general hospitals in which bed sizes are between 200 and 500 among a total of 276 general hospitals. The main data of financial indicators were collected from 48 hospitals, and it was analyzed by using two statistical models. For Model I, three input and two output variables were used for efficiency evaluation. In particular, three input variables were the number of medical doctors, the number of paramedical personnel, and the bed size. And, two output variables were the numbers of inpatients and outpatients per year, adjusted by bed-size. The results of DEA analysis showed that only seven out of 48 hospitals(15%) turned out to be efficient. The decision-tree analysis also showed that there were six significant influencing factors for Model I. Six factors for Model I were Bed Occupancy Rate, Cost per Adjusted Inpatient, New Visit Ratio of Outpatients, Retired Ratio, Net Profit to Gross Revenues, Net Profit to Total Assets. In addition, the management efficiency of hospital is proved to increase as profit and patient-induced indicators increase and cost-related indicators decrease, by the Tobit regression model of independent variables derived from the decision-tree analysis. This study may be contributable to the development of analytic methodology regarding the efficiency of hospital management in that it suggests the synthetic measures by utilizing DEA model instead of suggesting simple ratio-analyzing results.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.27-33
• /
• 2018

Korea's automobile industry, which has grown rapidly to become the world's fifth-largest automobile producer, To cope with environmental pollution and energy problems in order to prevail competitive edge in global market We are investing a lot of research personnel and costs. Among them, for realizing alternative light weight It is a part of the automobile module system that has achieved the technological development before the breakthrough in the injection molding process in the press process. Door module PNL was the subject of research. The door module PNL is expected to cause warpage before the mold production due to the thin and flat product characteristics and fiber orientation characteristic of the material. In this paper, CAE analysis and reverse correction tool Design. CAE analysis to obtain the results of weld line position, bending position and deformation value Through the correction tool, think3, the original product was modified before the mold production to improve the completeness of the parts. In fiber orientation, the position and size of the cooling channel in the mold, the position and size of the gate, Temperature, pressure, time, and work environment. Compared with the result of CAE analysis, the product that was reverse-corrected by Think3 was manufactured, and injection molding was performed. Injection molding products were tested 24 hours later. 3.5 mm to 7.0 mm, and under the fixed condition, the deviation was from 1.1 mm to 1.5 mm. Unlike the CAE analysis, the deviation of the actual injection pressure and the cooling temperature, the fiber orientation of the material, In order to solve this problem, it is necessary to compare the injection conditions with the database, I knew I had to catch the standard.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.2
• /
• pp.69-76
• /
• 2023

Hundreds of thousands of passwords are lost or forgotten every year, making the necessary information unavailable to legitimate owners or authorized law enforcement personnel. In order to recover such a password, a tool for password cracking is required. Using GPUs instead of CPUs for password cracking can quickly process the large amount of computation required during the recovery process. This paper optimizes on GPUs using CUDA, with a focus on decryption of the currently most popular PDF 1.4-1.6 version. Techniques such as eliminating unnecessary operations of the MD5 algorithm, implementing 32-bit word integration of the RC4 algorithm, and using shared memory were used. In addition, autotune techniques were used to search for the number of blocks and threads that affect performance improvement. As a result, we showed throughput of 31,460 kp/s (kilo passwords per second) and 66,351 kp/s at block size 65,536, thread size 96 in RTX 3060, RTX 3090 environments, and improved throughput by 22.5% and 15.2%, respectively, compared to the cracking tool hashcat that achieves the highest throughput.

• Convergence Security Journal
• /
• v.17 no.5
• /
• pp.143-151
• /
• 2017

The purpose of this study is to provide the future development of the PRC Marine Corps by analyzing the changing functions via its historical development. The PRCMC is an elite regular military forces and was established by the Central Military Commission(China) in 1953 in order to project the national military power toward the enemy's territory by overcoming maritime obstacles such as seas and lakes. The PRCMC is relatively smaller personnel strength compared with the whole size of the PRC military forces. Thus its functions were limited in the areas of amphibious and land operations, island and land defense against Taiwan before the PRC pursues expanding policy toward outside. However, in the 2000s, China pursues its policy for obtaining absolute national interest so that its functions are rapidly enlarged into defense of the forward naval bases, and those for evolving its power toward outside according to not only the island territorial dispute with Japan, but also Xi Jinping's active expanding policy what we call 'the one belt and one road'. So its personnel strength is slowly increased. If the increasement of the PRC Navy and Marine Corps would develop into the level of which they can contain the status and influence of the US military power in Asia-Pacific area, it is possible that the security environment of the North-east Asia including the Korean peninsula will be fluctuated. Consequently, the ROK also needs to reevaluate the functions and the size of the joint strength of the ROK Navy and Marine Corps considering the transition of the changing security environment.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Korean Institute of Interior Design Journal
• /
• no.16
• /
• pp.75-81
• /
• 1998

With the rise of the economic level and the improvement of the standard of living the size of the interior work is becoming large and specialized, With the recent opening of the domestic interior decoration market the order of the large-scale interior decoration work is actively received and its efficient construction is vigorously made. Accordingly reliability is required in keeping with all the accuracy of computing interior construction expenses systematically is importantly emerging. The estimation sheet written in a kind of process mode and in an area made as the construction expense breakdown mode were statistically treated and analyzed as well as quantity computation breakdown data. In determing the major factors that expert an influence on the factors of changes in construction expenses as well as the compositional ratio of construction work that becomes basic material for developing the cost model of interior decoration work the following conclusion could be made: Improvement should be made to suit the present situation by synthesizing and arranging the data practically used in current interior construction expenses. Required construction expenses for the kind of work common to each construction field are showing a given proportion and the required construction expenses of rather small scale interior construction work tend to be irregular. It is necessary to compute optimal construction expenses by calculating the optimal period of work and working personnel in consideration of the influential factor in each work.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.4
• /
• pp.605-614
• /
• 2002

Purpose : The purposes of this study is twofold: (a) to investigate the effect of job stress and organizational climate on the organizational effectiveness of hospital nurses, and (2) to examine the moderating effect of organizational climate on job stress. Method : Three organizational effectiveness variables(e .g., job satisfaction, organizational committment and group productivity) as outcomes variables were examined. The sample consisted of 602 nurses from 5 general hospitals affiliated university. Data were collected with self-administrated questionnaires and analyzed using hierarchical regression. Results : It was found that: (a) seven job stress variables(e. g., workload, role conflict, schedule, lack of knowledge, conflict with superior, conflict with other personnel and conflict with patients) have negative effect on job satisfaction and organizational committment; (b) organizational climate have positive main effects on job satisfaction and organizational committment; (c) the negative effects of job stress variables on job satisfaction and organizational committment are not moderated by organizational climate. Conclusion : Organizational climate mediates the effects of job stress on group productivity, but the size of the mediating effects was small. Various outcome variables need to be discussed further research.

• Journal of the Korean Society for information Management
• /
• v.21 no.4 s.54
• /
• pp.89-107
• /
• 2004

This study analyzes the present conditions and operations of digital information rooms in the five selected university libraries located in Daegu and Kyoungpook area, with a special regard to the personnel, size of the room, facilities, collections, user instructions and public relations, and related tasks being done. It concludes with some suggestions and recommendations to improve the existing practices and the works in the room based on the result from this study.

• Journal of Distribution Science
• /
• v.21 no.5
• /
• pp.19-29
• /
• 2023

Purpose: The study's primary objective was to pinpoint the variables impacting consumers' impulsive purchasing decisions in the distribution centers in Kathmandu, the capital city of Nepal. Research design, data, and methodology: The independent variables used to identify consumer impulse buying behavior were the in-store displays, store employee behavior, reference groups, and promotional activities. A 6-point Likert scale questionnaire was employed for collecting the primary data from customers at the retail center of Kathmandu. The study's sample size was 396, employing a convenient sampling method. Statistical Package for the Social Sciences (SPSS) and Analysis of a Moment Structures (AMOS) have been used to show the relationships between dependent and independent variables. Results: The outcome of the path analysis using structural equation modeling demonstrates that in-store displays, reference groups, and store employees' behavior significantly influence the customers' impulse buying decisions in the distribution center. Additionally, it has been discovered that promotional activities have no significant impact on consumers' impulsive purchasing decisions made at the retail center of Kathmandu. Conclusions and Implications: The study's findings indicate that the actions of store personnel, reference groups, and in-store displays significantly contribute to the acceleration of impulsive purchases. Such findings provide researchers and business executives with a road map for the future.