• Journal of Information Technology Services
• /
• v.13 no.1
• /
• pp.125-134
• /
• 2014

Device discovery for D2D (device-to-device) communication enables a device to discover other devices in order to initiate communication with them. Devices should perform the discovery phase using a small quantity of radio resource in a short time and be able to reduce the load of the base station. Legacy device discovery schemes have focused on discovering as many target devices as possible. However, it is not appropriate for peer-to-peer D2D communication scenario. Further, synchronization problems are an important issue for discovery signal transmission. This paper proposes a discovery method that one requesting device discovers a specific target for communication. Multiple antenna beamforming is employed for the synchronization between the base station and a target device. The proposal can reduce the load of the base station using the information that it already maintains and improve the reliability of the device discovery because two times of synchronizations using beamforming among the base station and devices can make the exact discovery of a target device with mobility possible.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.295-299
• /
• 2001

1912 April 14th tietanik is in favor disaster at marine accident to do and the world-wide various nations, to be to a marine, after providing the treaty for an immediacy with international agreement there are by all vessels and the radio communication equipment for immediacy navigation they establish. Also by a vessel immediacy law 4th favor regulation even from our country in order to establish a radio communication equipment. But it is a GMDSS and it follows in introduction of new communication system and the region change is brought about in vessel communication system and the many problem point occurs. Against the problem point of the our country marine communication which it follows hereupon it researches and it does to sleep.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.685-696
• /
• 2001

The purpose of this study was to establish the marketing strategy, that strengthens the brand royalty of their own in apparel industry and that can induce consumers brand switching against competitive brand. This study was classified into theoretical and experimental study. Experimental study was done, using the survey, to prove the models for consumers responses to brand switching by the theoretical study. It analyzed at last five hundred ninety-two women in the age of twenty to thirty years old who live in Seoul. Followings are the summary of the results revealed through the experimental study. First, brand switching behavior of consumers for formal dress was attributed to two extremes the inner motivation of variety seeking tendency and communication contact, complex variety seeking group, true variety seeking group, derived variety seeking group, and variety avoiding group. Second, the cognition response to marketing communication the types of brand switching shows difference in all communication variables except the service promotion of sales promotion communication. As to attitude response, it was found meaning difference in all communication variables except the sales promotion through price adjustment.

• Knowledge Management Research
• /
• v.11 no.2
• /
• pp.133-152
• /
• 2010

This paper suggests a typology of the modes of collaboration for scientific and technological knowledge production and sharing (STKPS) based on knowledge communication types, including organizational factors, communication channel, intensity, and decision-making, that affect STKPS processes. It is mainly designed to rearrange ideas about collaboration drawn from the literature in order to develop a conceptual framework for categorizing modes of collaboration based on how communication patterns shape four modes of collaboration. In the conclusion and discussion part, practical implications, limitations of this study, and further studies are discussed. In particular, the practical implications propose communication patterns suitable for five stages of collaboration processes. As the collaboration initiation or set-up stage is critical, extensive face-to-face communication is recommended in the auditing stage. In the execution stage, media-based communication can be actively utilized, because collaborators will mostly exchange explicit codified knowledge supported by IT. The evaluation and reinforcement stages concentrate on tacit knowledge exchange and explicit knowledge evaluation, which requires intensive face-to-face communication including negotiations for evaluating collaboration outcomes and partnership.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.105-111
• /
• 1997

This Paper Proposes a new efficient system design strategies for the acoustic-based underwater multiple modem and media access control protocol. The system aims to establish the acoustic-based communication network of an underwater vehicles for deep sea mining, which ensures a certain level of maximum throughput regardless of the propagation delay of acoustic and allows fast data transmission through the acoustic-based multiple channel. A media access control protocol for integrated communication network and it's acoustic-based communication modems that allows 'peer-to-peer' communication between a surface mining plant multiple underwater system is designed, and the proposed media access control protocol is implemented for its verification. Furthermore, a proposed design strategies which make it possible to control the multiple vehicle for an underwater mining is presented in this paper.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.3
• /
• pp.1-6
• /
• 2011

In this paper, the IC(Integrated Circuit) for multi-channel synchronous communication was designed by using FPGA and VHDL language. The existing chips for synchronous communication that has been used commercially are composed for one to two channels. Therefore, when communication system with three channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 synchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 1024 bytes respectively and consequently high speed communication became possible. It was designed with a communication signal of a form various encoding. To detect errors of communications, the CRC-ITU-T logic and channel MUX logic was designed with hardware logics so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. In order to show the performance of designed IC, the test was conducted successfully in Quartus simulation and experiment and the excellence was compared with the 85C3016VSC of ZILOG company that are used widely as chips for synchronous communication.

• The Journal of Korean Physical Therapy
• /
• v.33 no.5
• /
• pp.245-251
• /
• 2021

Purpose: This study sought to identify the effect of various types of communication by physical therapists on patient satisfaction and revisit intention. Methods: A total of 212 patients who received physical therapy in Seoul and the Gyeonggi province were surveyed on patient satisfaction and revisit intentions depending on the types of communication by physical therapists. Frequency and correlation analyses were conducted to process the data using the SPSS 22.0 program, and the AMOS 18.0 statistical package was used for confirmatory factor analysis. A structural equation modeling analysis was also performed to verify the model and the hypothesis that was set up in the present paper. Results: The survey showed that patient satisfaction correlates positively and significantly with patient-centric communication, physical factors, and spatial behavior. A significant negative correlation was also found between patient satisfaction and therapist-centered communication. Patient satisfaction positively correlated with revisit intentions. Conclusion: These results showed that there was a positive correlation between the communication of the physical therapist and the satisfaction recognized by a patient. This implies that the patient satisfaction with a physical therapist increases as the communication skills of a physical therapist improve. These findings suggest that a physical therapist must adopt patient-centric communication styles, physical factors, and spatial behavior. This study was important as it generated basic data for the formation of a therapeutic relationship through efficient and promotional communication skills. It recognizes the importance of communication between a physical therapist and a patient as the indispensable factor for interaction.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.3
• /
• pp.153-157
• /
• 2011

This study to implement properties such as high brightness, reliability, lower power consumption and long lifetime indoor illumination control visible light communication system that with LED used by illuminations. It has probability presently to apply many application field like ubiquitous. To implement such a system, it designs Date to transmit signals to visible light communication transmitter/receiver analyzes the communication performance using computer programming language. This research result Confirmed that it is possible to implement indoor illumination control visible light communication transmitter/receiver consisting of smooth date.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.2
• /
• pp.82-89
• /
• 2006

It appears that it is possible for us to make a wireless communication of even home-network system within car by integrating with the Ubiquitous such as mobile phone, wireless Internet, GPS and DMB in the future. If the present wireless surroundings within the car are connected with very high-speed wireless network as measurement system for wireless communication surroundings within this car in the future, it will develop the complicated communication conditions such as safe checkup, communication between systems within car, and wireless communication for user entertainment unlike universal communication conditions. Accordingly, there is the necessity of the device that can measure the interference of electric wave, communication speed and communication quality by a kind of each car. This paper aims at making the real measurement device to raise the reliability of each Application for inquiring into the interference about each other in the frequency band used under Telematics surroundings.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.121-133
• /
• 2015

IoT utilized network vitalization between objects are being rapidly established within current IT communication environment. Therefore the worth of smart mirrors is rising for it is a tool to allow online network between objects to be possible in human communication environment. For effective IoT generation's communication, this research intends to evaluate the smart mirror's value for practical uses based on the users' experiences. For the UX evaluation according to the locations where it will be used, Peter Morville's Honeycomb model and Jocob Nielsen's usage evaluation principles were referred to analyze effectiveness of 4 factors, utilization convenience, communication effectiveness, mass interest and space adequateness on households, public places and work places. Hence, we have were led to an objective result through statistical analysis method based on survey. As a result, we have confirmed the smart mirror's positive influence on the users' effective communication in all places. Especially in households, utilization convenience and space adequateness appeared to be high that confirmed sufficient users' need for the home-automation services. In public places, the communication effectiveness and space adequateness ranked high to confirm that the smart mirror utilization is adequate to provide location information. Also, in work places, the mass adequateness was high that we were able to confirm that supply of work place-specific service contents would bring meaningful results to the users. The smart mirrors are the adequate method to provide effective communication in IoT generation with high possibilities in further development.