• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.1
• /
• pp.59-65
• /
• 2018

The object of this paper was to analyze combined load acting on agricultural reservoir. This study was carried out to 3-D numerical modeling for displacement characteristic and seismic acceleration characteristic. The results of study were analyzed and summarized as follow. It was found that the displacement caused by combined load acting on railway and agricultural reservoir did not reflect the effect of load and the seismic wave consistently. The ground accelerations that occur in railway and dam were amplified because 3-D numerical analysis program interprets ground as an elastic body. Actual ground shows characteristics of elasticity and plasticity, so measured values will show different tendency. As a result of analyzing displacement characteristics, it is considered to be related to stiffness. The Ofunato seismic wave, the displacement (77.1 mm) of the body satisfied the allowable displacement (220 mm), but The Hachinohe seismic wave (282.8 mm) did not. It is considered that displacement caused by combined load is affected not only by acceleration but also by characteristics of materials.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.12B no.1
• /
• pp.24-30
• /
• 2002

The developments of the solar and the wind power energy are necessary since the future alternative, energies that have no pollution and no limitation are restricted. Currently power generation system of MW scale has been developed, but it still has a flew faults with the weather condition. In order to solve these existing problem combined generation system of photovoltaic(400W) and wind power generation system(400W) was suggested. It combines wind power and solar energy to have the supporting effect from each other. However, since even combined generation system cannot always generate stable output with ever-changing weather condition, power storage apparatus that uses elastic energy of spiral spring to combined generation system was also added far the present study. In an experiment, when output of combined generation system gets lower than 12V(charging voltage), power was continuously supplied to load through the inverter by charging energy obtained from generating rotary energy of spiral spring operates in small scale generator.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.115-115
• /
• 2002

To evaluate the correlations between the expression of cyclin B1 mRNA and protein after stimulation and oocyte activation and development of nuclear transferred mouse embryos, this study was performed. The oocyte activation was induced by 7% ethanol or 10$\mu\textrm{g}$/$m\ell$ Ca-ionophore without (single) or with (combined) 10$\mu\textrm{g}$/$m\ell$ cycloheximide (CH). Cyclin B1 mRNA and protein in mouse oocytes was evaluated by PCR and western blot. The activation and blastocyst development in both single (P<0.05) and combined (P<0.01) stimulation was higher than in non-activated group. The cyclin B1 mRNA and protein levels were significantly reduced in both single and combined stimulation groups (P<0.05), respectively. Cyclin B1 mRNA expression showed a negative correlation between activation and blastocyst development in both single and combined stimulation groups. And also the expression of cyclin B1 protein showed a negative correlation with between oocyte activation and blastocysts development in both single and combined stimulation groups. In conclusion, it may suggest that single and combined stimulation increases the oocyte activation and blastocyst development of nuclear transferred embryos, because it induces the degradation of cyclin B1 mRNA and protein after activation in enucleated mouse oocytes.

• Journal of the Korean Society of Safety
• /
• v.12 no.1
• /
• pp.77-93
• /
• 1997

The natural convection and combined heat transfer induced by fire in a rectangular enclosure is numerically studied. The model for this numerical analysis is partially opened, it is divided by a vertical baffle projecting from ceiling. The solution procedure Includes the standard k- $\varepsilon$ model for turbulent flow and the discrete ordinates method (DOM ) is used for the calculation of radiative heat transfer equation. In this study, numerical simulation on the combined naturnal convection and radiation is carried out in a partial enclosure filled with absorbed-emitted gray media, but is not considered scattering problem. The velocity vectors, streamlines, and isothermal lines are compared the results of pure convection with those of the combined convection-radiation, the combined heat transfer. Comparing the results of pure convection with those of the combined convection-radiation, the combined heat transfer analysis shows the stronger circulation than those of the pure convection. Three different locations of heat source are considered to observe the effect of heat source location on the heat transfer phenomena. As the results, the circulation and the heat transfer In the left region from heating block are much more influenced than those in the right region. It is also founded that the radiation effect cannot be neglected in analyzing the building in fire.

• 한국데이터정보과학회:학술대회논문집
• /
• 2002.06a
• /
• pp.97-106
• /
• 2002

Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was suggested by Welch et. al. and studied by others. In these studies, only single quality characteristic was considered. We propose how to simultaneously optimize multiple quality characteristics using desirability function when we used the combined-array approach to assign control and noise factors. An example is illustrated to the combined-array approach.

• Journal of Integrative Natural Science
• /
• v.10 no.1
• /
• pp.51-57
• /
• 2017

The Taguchi parameter design in industry is an approach to reducing performance variation of quality characteristic in products and processes. In the Taguchi parameter design, the product array approach using orthogonal arrays is mainly used. It often requires an excessive number of experiments. An alternative approach, which is called the combined array approach, was studied. In these studies, only single response was considered. In this paper we propose how to simultaneously optimize multiresponse for the robust design using the combined array approach.

• 연구논문집
• /
• s.27
• /
• pp.75-86
• /
• 1997

Combined cycle power plant is a system where a gas turbine or steam turbine is used to produce shaft power to drive a generator for producing electrical power and the steam from the HRSG is expanded in a steam turbine for additional shaft power. Combined cycle plant is a one from of cogeneration. The temperature of the exhaust gases from a gas turbine ranges from $400^\circC$ to $600^\circC$, and can be used effectively in a heat recovery steam generator to produce steam. Combined cycle can be classed as a "topping(gas turbine)" and a "bottoming(steam turbine)" cycle. The first cycle, to which most of the heat is supplied, is called the topping cycle. The wasted heat it produces is then utilized in a second process which operates at a lower temperature level and is therefore referred to as a "bottoming cycle". The combination of gas/steam turbine power plant managed to be accepted widely because, first, each individual system has already proven themselves in power plants with a single cycle, therefore, the development costs are low. Secondly, the air as a working medium is relatively non-problematic and inexpensive and can be used in gas turbines at an elevated temperature level over $1000^\circC$. The steam process uses water, which is likewise inexpensive and widely available, but better suited for the medium and low temperature ranges. It, therefore, is quite reasonable to use the steam process for the bottoming cycle. Only recently gas turbines attained inlet temperature that make it possible to design a highly efficient combined cycle. In the present study, performance analysis of a dual pressure combined-cycle power plant is carried out to investigate the influence of topping cycle to combined cycle performance.

• Journal of the Korean Regional Science Association
• /
• v.10 no.2
• /
• pp.61-71
• /
• 1994

Despite of being the criteria to choose the efficient and reasonable alternatioves inactual planning process, the measure of accessibility rarely has applied to practices because each model has unexplicity concept of it and limitations in itself. Accessibility implies transportation system which offers opportunity of movement to overcome spatial separation and, simultaneously, land-use system which represents the location of each activity. Therefore, measures of accessibility have to represent the attractiveness of locations and the interactions of activities, that is, land-use and transportation, with an index. Considering that urban activity is based on the economic efficiency, costs and benfits, accessibility means the economic efficiency of the location of activity and the travel in view of land-use and transport repectively. Combined models that measure accessibility with considering land-use and tranportation simultaneously depend on reasonable concepts, but it is too simple for them to explain the accessibility which resulted from complex interaction of urban activities. Combined urban activity model developed by Kim (1983) and Rho (1989) explains the characteristics of activities in each regions and urban strcture in economic general equilibrium states in the long term of urban system. This model measures a regional accessibility with a dual variable which means the location surplus. This is a more systematic and comprehensive model for calculating the regional accessibility because it considers the interaction of each activity in urban system. It needs efforts to apply the accessibility index as a criterion in actual planning process through finding and quantitification of other explanatory variables to measure it in combined urban activity model.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.2
• /
• pp.145-160
• /
• 2012

The globe-trotting trend has been converted from tourism for the simple purposes of sightseeing and enjoyment to a form of learning and practicing the more specialized contents by directly participation. Traditional cultural resources have sufficient potential as culture and tourism assets that fit this kind of trend. Therefore, building proper tourist resources for their application has become a very urgent and important matter. To make masterpiece tourism packages through combined services of traditional cultural resources, it is necessary for operators to ponder diverse methods that can be used to develop various experience programs and conserve traditional cultural properties by continuously generating profits. The major results of this research are as follows. Firstly, this study proposes plans for unified tourist information and combined services of traditional cultural resources based on ubiquitous IT. Secondly, it is ascertained that the organization of combined operational consultative groups and the improvement of operator' capability are required to execute combined services of traditional cultural resources. Thirdly, we propose business plans to generate profits in both product aspect and network aspect.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.1
• /
• pp.119-126
• /
• 2004

Generally, reinforced concrete is one of the most commonly used structural materials and it prevents corrosion of steel bar by high pH of interior, But, as time elapsed, reinforced concrete structure become deteriorated by many of combined deterioration factors and environmental conditions. And, there are large number of deteriorate mechanism of the reinforced concrete structure and it acts complexly. It is recognized that steel bar corrosion is the main distress behind the present concern regarding concrete durability. In this study, to institute combined deterioration environments, established acceleration condition and cycle for combined deterioration environments has a resemblance to environments which are real structures placed. After that to confirm corrosion properties of reinforced concrete due to permeability with covering depth and types of surface cover under combined deterioration environments, measured carbonation velocity coefficients, chloride ion diffusion coefficients, water absorption coefficients, air permeability coefficients and electric potential, corrosion area ratio, weight reduction, corrosion velocity of steel bar. The results showed that an increase in age also decrease carbonation velocity coefficients, increase Chloride ion diffusion coefficients and increases water absorption coefficients. As well, an increase in age also increases corrosion of steel bar. Data on the development of corrosion velocity of steel bar with types of surface cover made with none, organic B, organic A, inorganic B, and inorganic A is shown. As well, permeability and corrosion velocity of steel bar with covering depth is superior to 10mm than 20mm. And it is confirmed permeability and corrosion properties of steel bar are closely related.