• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.839-844
• /
• 2009

This research investigates the importance of the microbial metabolic pathways such as denitrification, iron reduction, and methanogenesis, in the degradation of organic matters of the sediments. There are statistically significant differences( P < 0.05) in the rates of denitrification, iron reduction, and methanogenesis according to the location: Site A has no plant, Site B is dominated by Scirpus, and Site C is dominated by Phragmites. Among them, Site C showed different methanogenesis rate depending on the sediments depth. The organic matter content increased from Site A to Site C. Site A had the smallest organic matter content whereas it showed the largest denitrification rate and iron reduction rate. Site C had the largest methanogenesis rate. Denitrification is the dominant pathways based on the assumption that anaerobic degradation of organic matter is mainly carried out through denitrification, iron reduction, and methanogenesis.

• Korean Journal of Community Nutrition
• /
• v.4 no.4
• /
• pp.529-538
• /
• 1999

It is very important to collect information on the nutritional status of the Korean population for the development of health promotion programs including nutrition. The purpose of this study was to assess the nutritional status of various population living in selected areas for model nutritional work. Seven hundred eighty households(30 households per each area)from 26 areas participated in this study from November 1 to November 20, 1996. Dietary intake data for two consecutive days were collected at household level by a weighting method. The mean energy intake of the subjects(1,934kcal) was higher than that resulted from the ‘95 Korean National Nutrition Survey(1,839kcal). The proportion of energy derived from cereals was 60.1%. The proportion of total protein intake from animal sources was 49.4%. These results were similar to those found in the ‘95 Korean National Nutrition Survey. Most nutrients(except iron, thiamin, riboflavin, vitamin C, and crude fiber) were higher than the result of the ‘95 Korean National Nutrition Survey. However, the average iron intake was about 68% of the result of ‘95 Korean National Nutrition Survey. This may be due to the adjustment of iron content in rice(3.7mg/100glongrightarrow0.5mg/100g) included in nutrient database for calculating nutrient intakes. The mean energy contribution from carbohydrate, protein, and fat were 64.2%, 16.4% and 19.4%, respectively. Significant differences of nutrient intakes were noted among some areas, which may be due to different food intake patterns according to the needs of the particular area. Therefore, the result of this study indicates that there are significant differences in food and nutrient intakes among the areas, suggesting that nutritional improvement programs may need to be developed differently by areas.

• Korean Journal of Community Nutrition
• /
• v.8 no.6
• /
• pp.831-839
• /
• 2003

This study was conducted to investigate whether there were any differences in the body image perception, dietary behavior and maternal dietary guidance between an obese group (“OG”) and a normal weight group (“NWG”), and furthermore, to provide basic informations for comprehensive educational programs for obese children. For this purpose, the questionnaire method was used. The subjects were 1,501 elementary school children, in the 4th to the 6th grades in Seoul, Busan, Daegu, Gwangju, and Andong, and their mothers (1,459). The percentage of the children who misperceive their body image was higher among the girls (30.4%) than the boys (22.6%) The average scores for balanced dietary behavior as assessed by the children was higher in the OG than in NWG; the average scores for dietary control as assessed by their mothers was higher in the NWG than in the OG. The scores for dietary behavior as assessed by the children was different from those as assessed by their mothers. Assuming that the mothers would give more correct and balanced answers, the development of a reliable questionnaire for dietary behavior that could be more accurately answered by the children is necessary. Maternal dietary guidance for dietary control was more frequently given in the OG as compared with the NWG and more frequently in girls as compared with boys ; while that for balanced diet was more in the NWG as compared with the OG. The worse the mothers estimate of the dietary behavior for their children, the more they tried to guide their children in dietary behavior. It is recommended that the children should be taught to correctly recognize the degree of their obesity, and receive the appropriate educational program accordingly, including the maternal dietary guidance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.834-839
• /
• 2000

The structural properties that SEM photograph of ZnO varistors surface studied by fractal mathematics program were investigated to verify the relations of electrical characteristics. The SEM photograph of ZnO varistors surface were changed by binary code and the grain shape of that were analyzed by fractal dimension. The void of ZnO varistors surface was found by fractal program. The relation between grain density and electrical properties depend on fractal dimension. The grain size in ZnO varistors surface was decreased by increasing of Sb$_2$O$_3$ addition. The spinel structure was formed by Sb$_2$O$_3$addition and it was depressed the ZnO grain formation. The grain size of ZnO by Sb$_2$O$_3$addition were from 5 to 10[${\mu}{\textrm}{m}$]. Among of ZnO varistors, fractal dimension of ZnO4 was very high as a 1.764. The density of grain boundary in ZnO2 and ZnO3 varistors surface was 15[%] by formed spinal structure. The breakdown electric field of ZnO2 that fractal dimension has 1.752 was very high to be 8.5[kV/cm]. When the fractal dimensin was high, the grain shape of ZnO varistors was complex and the serial layers of ZnO grain was increased.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.835-839
• /
• 2002

Stoichiometric $LiNbO_3$(LN) single crystals of 1 mm diameter and 30∼40 mm length with co-doped the $Er_2O_3$ and MgO were grown by the Micro-Pulling Down(${\mu}$-PD) method. The grown crystals were investigated for the change of the up-conversion property by the $Er_2O_3$ and MgO addition and the optical damage by the MgO concentration. Also, the crystals were studied the defects using the optical microscope and it is identified the homogeneities of the distribution of the $Er_2O_3$ and MgO concentration by the Electron Probe Micro Analysis(EPMA).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.839-842
• /
• 2011

Lately Various researches on energy harvesting techniques for wireless sensor networks have been performed to overcome the power limitation of sensor nodes. In wireless sensor networks with harvesting techniques, sensor nodes exploit environmental energy, such as solar or wind energy, as the power sources of the nodes. Existing energy constrained environment routing protocols may not be suitable for energy harvesting based wireless sensor networks because they do not consider the accumulated energy from harvesting devices. In addition, the paths which aren't dispersed shorten the network lifetime. Therefore, in this paper, the algorithm that the path between each node is dispersed is proposed. In case of using the algorithm to be proposed through the simulator it showed that path of the node is variously reflected.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.11
• /
• pp.833-839
• /
• 2002

As the demand for slim laptops requires low-height optical disc drives, vibration problems of optical disc drives are of great concern. Additionally, with the decrease of a track width and a depth of focus in high density drives, studies on vibration resonance between mechanical parts become more important. From the vibration point of view, the performance of optical disc drives is closely related with the relative displacement between a disc and an objective lens which is controlled by servo mechanism. In other words, to read and write data properly, the relative displacement between an optical disc and an objective lens should be within a certain limit. The relative displacement is dependent on not only an anti-vibration mechanism design but also servo control capability. Good servo controls can make compensation for poor mechanisms, and vice versa. In a usual development process, robustness of the anti-vibration mechanism is always verified with the servo control of an objective lens. Engineers partially modify servo gain margin in case of a data reading error. This modification cannot correct the data reading error occasionally and the mechanism should be redesigned more robustly. Therefore it is necessary to verify a mechanism with respect to the possible servo gain plot. In this study we propose the experimental verification method for anti-vibration mechanism with respect to the existing servo gain plot. Thismethod verifies axial vibration characteristics of optical disc drives on the basis of transmissibility. Using this method, we verified our mechanism and modified the mechanism for better anti-vibration characteristics.

• Journal of Korean Physical Therapy Science
• /
• v.29 no.1
• /
• pp.30-40
• /
• 2022

Background: This study analyzed the reliability of smart guides for gait analysis in patients with stroke. Design: Cross-sectional study. Methods: The participants of the study were 30 patients with stroke who could walk more than 10 m and had an MMSE-K test score of ≥24. Prior to the experiment, the subjects or their guardians entered their demographic characteristics including gender, age, height, weight into the prepared computer. The experiment was conducted in a quiet, comfortable, and independent location, and the patient was reminded of the equipment description, precautions, and safety rules for walking. A smart insole was inserted into the shoes of the patients and the shoes were put on before the patients walked three times on the 5-m gait analysis system mat installed in the laboratory. Results: The reliability of the equipment was compared with that of the gait analysis system, and the results of this study are as follows: among the gait analysis items, velocity had an ICC=0.982, the cadence had an ICC=0.905, the swing phase on the side of the gait cycle had an ICC=0.893, the swing phase on the side of the gait had an ICC=0.839, that on the non-affected side had an ICC=0.939, single support on the affected side had an ICC=0.812, and support on the non-affected side had an ICC=0.767. Conclusion: The results of this study indicate no statistical difference between the smart insole and the gait analysis system. Therefore, it is believed that real-time gait analysis through smart insole measurement could help patients in rehabilitation.

• Journal of Society of Preventive Korean Medicine
• /
• v.25 no.3
• /
• pp.57-71
• /
• 2021

Objectives : Computer-based test (CBT) will be introduced in the national examination of Korean medicine doctors from 2023. This study was aimed to provide some information, including prior considerations, to those preparing for CBT, by presenting a summary of the survey results from participants in a CBT simulation test. Methods : In December 2020, applicants from the graduating class of the college of Korean medicine from four universities participated in the simulation test for CBT. An online anonymous survey on the applicants' preference for CBT versus paper-based tests (PBT) was conducted. The questionnaire consisted of multiple-choice questions on a 5-point Likert scale and free-form questions. Results : A total of 176 students responded to the survey. Their response to CBT was generally positive. The item with the highest agreement was that it should provide a sufficient opportunity to experience CBT in the undergraduate exam (4.38±0.839). Concerns about the possibility of cheating or poor concentration were also detected. In addition to guaranteeing the stability of the CBT system, there were many comments expressing the need to supplement functions within the CBT system, including the memo or highlighter function. Conclusions : This study confirmed the feasibility of CBT including multimedia questions in the field of Korean medicine education and identified overall positive responses from those who experienced the CBT simulation test. Although time is short and there is so much to prepare, we hope this will be a leap forward for effective educational innovation in line with the changing environment of the health care education field.

• Food Science of Animal Resources
• /
• v.43 no.5
• /
• pp.826-839
• /
• 2023

This study investigated the effects of different charcoals on the occurrence of 16 polycyclic aromatic hydrocarbons (PAHs) in grilled beef steaks and beef patties. Seven different charcoals were used as follows: from oak wood (C1), from orange wood (C2), from Valonia oak wood (C3), from Marabu wood (C4), extruded charcoal from beech wood (C5), from coconut shells (C6), and from hazelnut shells (C7). The grilling times for each charcoal type were 6 min for the beef patties and 7 min for the beef steaks, until the internal temperature reached at least 74℃. The total concentration of 16 PAHs (PAH16) in beef steaks grilled with C1 (35.75 ㎍/kg) and C7 (36.39 ㎍/kg) was higher than that of C3 (23.80 ㎍/kg) and C6 (24.48 ㎍/kg; p<0.05). The highest amounts of PAH16 (216.40 ㎍/kg) were determined in the beef patty samples grilled using C5 (p<0.05). The summation of benzo[a]anthracene, chrysene, benzo[b]fluoranthene and benzo[a]pyrene, referred to as PAH4, was not detected in any of the beef steaks, whereas it was determined in the beef patties grilled with C2 (7.72 ㎍/kg) and C5 (22.95 ㎍/kg; p<0.05). The PAH16 concentrations of the beef patty samples in each charcoal group were significantly higher compared to the beef steaks (p<0.05). To avoid the formation of high PAH levels, the use of extruded charcoal and hazelnut shell charcoal should therefore be avoided when charcoal grilling beef steaks and beef patties, and low-fat meat products should be preferred.