• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.2
• /
• pp.269-280
• /
• 2018

This paper reports the results of field evaluation to determine the levels of heavy metals in major industrial complexes in Korea over a seven year period (2007~2013). The measurement of heavy metal was conducted using quartz fiber filter sampling and ICP-AES analysis. In order to validate the analytical performance of these methods, studies were also carried out to investigate data quality control(QC) parameters, such as the method detection limit (MDL), repeatability, and recovery efficiencies. The average concentrations of total suspended particulates (TSP) for the nine industrial complexes in Korea were $104{\sim}169{\mu}g/m^3$, which was higher than other industrial complexes and urban areas. The Sihwa and Banwol industrial complexes were shown to be the biggest contributing sources to high TSP emission ($159{\mu}g/m^3$ and $169{\mu}g/m^3$, respectively). The concentrations of heavy metals in TSP were higher in the order of Fe>Cu>Zn, Pb, Mn>Cr, Ni, As and Cd. It was observed that Fe was the highest in the Gwangyang and Pohang steel industrial complexes. The concentrations of Zn and Pb were high in Onsan, Sihwa and Banwol industrial complexes, and this was attributed to the emission from the nonferrous industry. Additionally, Cr and Ni concentrations were high in the Sihwa and Banwol industrial complexes due to plating industry. On the other hand, Ulsan and Onsan industrial complexes showed high Cr and Ni concentrations as a response to the emission of metal industry related to automobile. The correlation analysis revealed the high correlation between Cr and Ni in plating industry from Sihwa and Banwol industrial complexes. Adding to this, components related to coal combustion and road dust showed high correlation in Pohang and Gwangyang industrial complexes. Then Onsan and Ulsan industrial complexes showed high correlation among components related to the nonferrous metals.

• Particle and aerosol research
• /
• v.16 no.3
• /
• pp.65-72
• /
• 2020

In this study, the indoor fine dust concentration in an office of the Korea Knowledge Industry Center was measured for about 80 hours when the concentration of atmospheric PM_2.5 was very high. The effect of the operation of the air cleaner and the forced ventilation system on the indoor PM_2.5 was investigated, and the particle size distribution of the indoor and outdoor particles was analyzed. When forced ventilator and air purifiers were partially used, the indoor PM_2.5 concentrations were maintained between 27.7 ㎍/㎥ and 32.9 ㎍/㎥ when the atmospheric PM_2.5 was 127.7 ㎍/㎥ to 141.6 ㎍/㎥ during working hours. It is more effective to operate the air purifier without operating the forced ventilation system when the concentration of the PM_2.5 is high since the PM_2.5 penetrating the installed filter is continuously introduced indoor from the outside.

• Journal of Food Hygiene and Safety
• /
• v.28 no.4
• /
• pp.337-341
• /
• 2013

After it was known that an antioxidant function was associated with a reducing risk of cancer and cardiovascular disease, a large number of plant have been investigated for their antioxidant activity. However, lacking of the extensive antioxidant data in vegetables, a few natural antioxidant was used in the food industry. Therefore, this study was carried out to provide some scientific antioxidant activity data in the various vegetables. The samples (n = 275) including 24 kinds of vegetables were examined for antioxidant activity. Total Phenol Contents (TPCs) were measured colorimetric determination method using the Folin-Ciocalteu reagent by gallic acid as the control group. DPPH radical scavenging activity were also investigated using calculation of $IC_{50}$(concentration of extracted needed to inhibit 50% of the DPPH radical). The contents of TPCs were $0.32{\sim}49.26{\mu}g/kg$ and DPPH radical scavenging activity ($CI_{50}$) was 0.0~2.43 mg/mL in vegetables. The best antioxidant effect was shown in Garlic for both antioxidant assay methods.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.115-125
• /
• 2010

A theme park is not just a recreational space for leisure activities, but also a place of storytelling as collected around abstract boundaries called themes. These stories are 'a space that tells the meaning' that the visitor is looking for and the Robot Land space offers robots, humans, and nature. This study is a description of the design strategy and content of the work which was elected as a subject of the subsequent rank negotiation of the Masan Robot Land design contest for the selection of a private contractor. The focus of the plan is, first, the organizational power of each space and the delivery power of a theme for the history of revisits, which might be considered depending on whether or not the theme park has been successful in the visitor's mind. Second, it is to actively use the potential of Masan, which is not only the key hub of the mechanical industry but also has beautiful coastal resources. First, they created a space that can flexibly react depending on the user's desire and the change of form, minimizing environmental damage by using a linear metabolism that can provide an amalgam of the elemental characteristics of robots, humans, and nature as motifs. They introduced a planting plan for the admissions square, an existing forest, slope, vacation spot, the inside of a complex, and Eco Island, etc. by utilizing symbolic meaning and adjusting to the spatial characteristics of each space. In addition, they sought a detailed space by setting up zones tailored to the use and character of the subject area, having exhibitions and education about robots, vacation facilities for lodgers, various recreational and commercial facilities, and space for utopian gardens as themes. They planned Masan Robot Land to be a true cultural space that creates mental richness on the basis of not only the economical effects but also local emotion.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.5
• /
• pp.457-469
• /
• 2016

Nakdong river barrage was affected by artificial interference such as construction of port, industrial complex and estuary barrage. This change in Nadong river lead to environmental changes and affected the ability of barrier islands. Therefore, it is decided that the observation of changes in the Nakdong river estuary is very important. In this paper, the topographic change of the Nakdong river barrage observe based on Landsat TM, ETM+ images from 1984 to 2015. In addition, this study tried to conduct a comparative analysis on the area for change of sandy sediment according to tide level. This results could estimate height and volume about sandy sediment accumulated on the lower sand dune. Also, these results are expected to be the basis for prediction of the changing topography of the sand dune. The area of the average change in region 1,2,3 was calculated as 3,015m², 167,550m², 14,596m². This result is expected to be very useful for the continuous observation for sediment changes of Nakdong river.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.485-498
• /
• 2015

Structural analysis for a large-scale fault in Maegok-dong, Ulsan, was carried out based on filed-works to investigate the geometric and kinematic characteristics of the fault as well as its Quaternary slip. As results, a series of repeated stratigraphy, minor faults, fracture zones, and deformation band clusters are observed over a distance of about 100 m in the first studied site consisting of sedimentary rocks, which may indicate the damage zone of a large-scale fault in this site. In the second site, mainly composed of granitic clastic rocks, a large-scale thrust fault is expected based on low-angle dipping faults showing branched and/or merged patterns. Age of the last slip on this fault was restrained as after 33,275 ± 355 yr BP based on radiocarbon dating for organic material included in the gouge zone. Dimension of fault damage zone, dominant sense of slip, and age of the slip event associated with the fault suggest that these structures have a close relationship with the Ulsan Fault and/or Yeonil Tectonic Line, which are well-known large-scale neotectonic structural features around the study area. Therefore, it is necessary to study the characteristics of the faults in detail based on structural geology and paleoseismology in order to ensure seismic and geologic stability of the buildings under construction, and to prevent geologic hazards in this area.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.84-92
• /
• 2020

Most facilities in chemical plants operate in environments that are outside the range of temperature and pressure that can be encountered on a daily basis, and are vulnerable to aging due to these stresses and environmental conditions. The facilities exposed to these conditions are not only likely to fail due to cumulative damage, but also lead to accidents if maintenance and replacement are not performed.Recommendation guidelines called risk-based inspection are widely used around the world-wide. However, limits exist for facilities that have already elapsed for a certain. As a result of the survey on the aging of Ulsan industrial complex in Korea, which carries out proper inspection, many of the facilities have been used for 20 years. Also, most of the facilities where the accident occurred have been in operation for more than 20 years. Therefore, this study suggested criteria for classifying devices that have exceeded a certain period of use as obsolete facilities. In addition, quantitative risk assessment was conducted. The safety investment method using the cost-benefit analysis method was proposed in order to calculate the loss cost and reduce the risk by expressing the risks of the corresponding aged facility as an Economic index. By utilizing the method of cost-benefit analysis of old facilities using the quantitative risk assessment presented in this study, it can be expected to improve the performance and life of old facilities, improve production efficiency and reliability of the system of facilities, change the recognition of safety management costs, increase employee stability, and reduce loss costs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.718-725
• /
• 2017

A liquid storage tank is one of the most important structures in industrial complexes dealing with chemicals, and its structural damage due to an earthquake may cause a disastrous event such as the leakage of hazardous materials, fire, and explosion. It is thus essential to assess the seismic fragility of liquid storage tanks and prepare for seismic events in advance. When a liquid storage tank is oscillated by a seismic load, the hydrodynamic pressure caused by the liquid-structure interaction increases the stress and causes structural damage to the tank. Meanwhile, the seismic fragility of the structure can be estimated by considering the various sources of uncertainty and calculating the failure probabilities in a given limiting state. To accurately evaluate the seismic fragility of liquid storage tanks, a sophisticated finite element analysis is required during their reliability analysis. Therefore, in this study, FERUM-ABAQUS, a recently-developed computational platform integrated with commercial finite element and reliability analysis software packages, is introduced to perform the finite element reliability analysis and calculate the failure probability of a liquid storage tank subjected to a seismic load. FERUM-ABAUS allows for automatic data exchange between these two software packages and for the efficient seismic fragility assessment of a structure. Using this computational platform, the seismic fragility curve of a liquid storage tank is successfully obtained.

• Journal of Environmental Health Sciences
• /
• v.47 no.1
• /
• pp.45-54
• /
• 2021

Objectives: This study evaluated the odor around an industrial complex area (#1-#5) and the operational effects of the Odor Monitoring System in Seo-gu in Daegu City. Methods: Samples were collected from November 2012 to December 2018 and were analyzed for complex odor. The odor occurrence rate and the odor reduction rate were calculated. Results: In 2018, the mean concentration of complex odor decreased 20.9% and the odor occurrence rate decreased from 65.0 to 27.5% around the industrial complex area (#1-#5) in Seo-gu compared to 2013. After the operation of the Odor Monitoring System, the standard excess rate (3.0%→40.8%) and the excess concentration of complex odor (1,442→4,304) increased at odor-emitting workplaces. In addition, the mean concentration of complex odor (15.9%) and the odor occurrence rate (60.6%→32.9%) around the industrial complex area (#1-#5) and the number of odor complaints (23.4%) in Seo-gu decreased. Conclusion: In order to reduce the odor around the industrial complex area, it is important to improve the odor emitting facilities. The Odor Monitoring System uses scientific and systematic monitoring methods that can help control and manage the odor emission facilities.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.202-216
• /
• 2021

Since the first 12 ones were designated in 1969, 228 places have been designated as tourism sites, and about 70 percent of them were designated before the 2000s. It shows that changes in most of tourism sites are needed in terms of physical, functional and environmental aspects. However, there are still not enough academic progress and policy consideration regarding the decline of tourism sites and the regeneration of them. This study aims to find the causes of decline and the factors to activate in tourism sites, to draw important conditions to recover the attractiveness of tourism sites in decline from the comprehensive analysis of causes and factors, and to apply the conditions to a real case in severely declining stage. According to the findings, the conditions for recovery could be restructured into four categories: 'The upgrade of hardware such as facilities in tourism site', 'the development of software such as contents and programs', 'the reinforcement of local capacity and institutional grounds' and 'the expansion of functions and the building of networks with various external stakeholders such as expert groups, related enterprises, talented individuals and so forth.