• Journal of Korean Society of Forest Science
• /
• v.112 no.1
• /
• pp.57-70
• /
• 2023

In recent years, the frequency of warnings about particulate matter (PM) has gradually increased in Korea, along with an increase in its intensity. Because of their vast surface area, reactivity to external particles, and characteristics of their leaves, urban trees can act as biofilters, reducing PM pollution. However, the air pollutant PM can cause various types of damage not only to human health but also to vegetation. Studies performed to date on the responses of trees to PM are still insufficient. Here, we analyzed the correlation between PM adsorption and physiological and biochemical responses of four major street tree species, namely, Abies holophylla, Acer buergerianum, Pinus densiflora, and Quercus variabilis, under conditions of approximately 300 ㎍ m^-3 of fly ash emissions using a phytotron. The results showed that the physiological and biochemical responses and PM adsorption differed depending on the tree species. In correlation analysis, it was confirmed that there were positive correlations between physiological factors, and PM adsorption on adaxial leaf surfaces negatively impacted the physiological characteristics. This study provides fundamental information for selecting tree species to reduce PM pollution and develop sustainable urban forests.

• Journal of Korea Foundry Society
• /
• v.42 no.6
• /
• pp.337-346
• /
• 2022

In order to optimize the solution treatment conditions of Al-7Si-(0.3~0.5)Mg-(0~0.5)Cu alloys, a series of heat treatment experiments were conducted under various solution treatment times up to 7 hours at 545℃, followed by a microstructural analysis using optical microscopy, FE-SEM, and Brinell hardness measurements. Rapid coarsening of eutectic Si particles was observed in the alloys during the first 3 hours of solution treatment but the size of those Si particles did not change at longer solution treatment conditions. Meanwhile, the degree of spheroidisation of eutectic Si particles increased until the solution treatment time was increased up to 7 hours. Q-Al5Cu2Mg8Si6 andθ-Al2Cu were observed in as-cast Cu-containing Al alloys but the intermetallic compounds were dissolved completely after 3 hours of solution treatment at 545℃. Depending on the initial Mg composition of the Al alloys, π-Al8FeMg3Si either disappeared in the alloy with 0.3wt% of Mg content after 5 hours of solution treatment or remained in the alloy with 0.5wt% of Mg content after 7 hours of solution treatment time. Mg and Cu content in the primary-α phase of the Al alloys increased until the solution treatment time reached 5 hours, which was in accordance with the dissolution behavior of Mg or Cu-containing intermetallic compounds with respect to the solution treatment time. From the results of microstructural changes in the Al-7Si-Mg-Cu alloys during solution treatment, it was concluded that at least 5 hours of solution treatment at 545℃ is required to maximize the age hardening effect of the present Al alloys. The same optimal solution treatment conditions could also be derived from Brinell hardness values of the present Al-7Si-Mg-Cu alloys measured at different solution treatment conditions.

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.35-46
• /
• 1998

The CY can be said to function in various respect as a buffer zone between the maritime and overland inflow-outflow of container. The amount of storage area needed requires a very critical appraisal at pre-operational stage. A container terminal should be designed to handle and store containers in the most efficient and economic way possible. In order to achieve this aim it is necessary to figure out or forecast numbers and types of containers to be handled, CY area required, and internal handling systems to be adopted. This paper aims to calculate the CY area required for each container handling system in Mokpo New Port. The CY area required are directly dependent on the equipment being used and the storage demand. And also the CY area required depends on the dwell time. Furthermore, containers need to be segregated by destination, weight, class, FCL(full container load), LCL(less than container load), direction of travel, and sometimes by type and often by shipping line or service. Thus the full use of a storage area is not always possible as major unbalances and fluctuations in these flow occuring all the time. The calculating CY area must therefore be taken into account in terms of these operational factors. For solving such problem, all these factors have been applied to estimation of CY area in Mokpo New Port. The CY area required in Mokpo New Port was summarized in the conclusion section.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.592-602
• /
• 2022

This study aimed to check habitat distribution and analyze influencing factors by analyzing the mating calls of Auritibicen intermedius inhabiting limited locations in South Korea by applying bioacoustic detection techniques. The study sites were 20 protection areas nationwide. The mating call analysis period was 4 years from 2017 to 2021, excluding 2020. The bioacoustic recording system installed at each study site collected recordings of mating calls every day for 1 minute per hour. Climate data received from the Meteorological Agency, such as temperature, humidity, rainfall, cloudiness, and sunshine, were analyzed. The results of this study identified A. intermedius habitat only in four national parks in the highlands of Gangwon Province (Mt. Seorak, Mt. Odae, Mt. Chiak, and Mt. Taebak) out of 20 study sites. During the four years of study, the mating call period of A. intermedius was between August 5 and September 28, and the duration of the mating call was 31 to 52 days. The temperature analysis during the appearance period of A. intermedius showed that A. intermedius mainly produced mating calls at temperatures between 13.1℃ and 35.3℃, and the average temperature during the circadian cycle of mating calls (09:00 to 16:00) was 24.4 to 24.9℃. The analysis of the circadian cycle of mating calls at four study sites where A. intermedius appeared in 2019 showed that A. intermedius produced mating calls from 06:00 to 16:00 and that they peaked around 11:00 to 12:00. During the appearance period of A. intermedius, four species appeared in common: Hyalessa maculaticollis, Meimuna opalifera, Graptopsaltria nigrofuscata, and Suisha coreana. A logistic regression analysis confirmed that sunlight was the environmental factor affecting the mating call of A. intermedius. Regarding interspecific influence, it was confirmed that A. intermedius exchanged interspecific influence with 4 other common species (H. maculaticollis, M. opalifera, G. nigrofuscata, and S. coreana). The above results confirmed that A. intermedius habitats were limited in the highlands of Gangwon Province highlands in Korea and produced mating calls at a lower temperature compared to other species. These results can be used as basic data for future research on A. intermedius in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.252-264
• /
• 2023

This paper proposes a design of a dual-band band-pass filter that integrates a λg/2 open SIR structure, a transmission line, and a fork-type structure with symmetric and asymmetric open stubs. To obtain the dual-band effect, the proposed filter uses the SIR structure and adjusts the impedance ratio of the SIR structure. Therefore, the position of the harmonics of the filter is shifted through the adjustment of the impedance ratio, and this can obtain a double-band effect. In order to obtain the dual-band characteristics, the dual-band effect is obtained by inserting a open stub between the SIR structures with the SIR structure divided in half. In addition, the second frequency response is obtained by adjusting the length of the open symmetrical stub in the fork-shaped structure. The asymmetrical open stub in the fork form achieves optimum bandwidth by adjusting the length. Therefore, the first center frequency of the proposed band-pass filter is 5.896 GHz and the bandwidth is 13.6 %. At this time, the measurement results are 0.13 dB and 33.6 dB. The second center frequency is 5.906 GHz and the bandwidth is 13.6 %. At this time, the measurement results are 0.15 dB and 19.8 dB. The reason is that when the impedance ratio (Δ) is higher than 1, the position of the harmonic is shifted to a lower frequency band. However, if the impedance ratio (Δ) is lowered by one step, the position of harmonics will move to a higher frequency band. The function of the filter designed using these characteristics can be obtained from the measurement result. The proposed band-pass filter has no coupling loss and no via energy concentration loss because there is no coupling structure of input/output and no via hole. Therefore, system integration is possible due to its excellent performance, and it is expected that dedicated short-range communication (DSRC) system applications used in traffic communication systems will be possible.

• Journal of Internet Computing and Services
• /
• v.24 no.2
• /
• pp.19-26
• /
• 2023

Humans have adapted and evolved to natural light. However, as humans stay in indoor longer in modern times, the problem of biorhythm disturbance has been induced. To solve this problem, research is being conducted on lighting that reproduces the correlated color temperature(CCT) of natural light that varies from sunrise to sunset. In order to reproduce the CCT of natural light, multiple LED light sources with different CCTs are used to produce lighting, and then a control index DB is constructed by measuring and collecting the light characteristics of the combination of input currents for each light source in hundreds to thousands of steps, and then using it to control the lighting through the light characteristic matching method. The problem with this control method is that the more detailed the steps of the combination of input currents, the more time and economic costs are incurred. In this paper, an LED lighting control method that applies interpolation and combination calculation based on the minimum spectral power distribution information for each light source is proposed to reproduce the CCT of natural light. First, five minimum SPD information for each channel was measured and collected for the LED lighting, which consisted of light source channels with different CCTs and implemented input current control function of a 256-steps for each channel. Interpolation calculation was performed to generate SPD of 256 steps for each channel for the minimum SPD information, and SPD for all control combinations of LED lighting was generated through combination calculation of SPD for each channel. Illuminance and CCT were calculated through the generated SPD, a control index DB was constructed, and the CCT of natural light was reproduced through a matching technique. In the performance evaluation, the CCT for natural light was provided within the range of an average error rate of 0.18% while meeting the recommended indoor illumination standard.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.627-638
• /
• 2022

This study was conducted at a village fishing farm on 4 peaks on the main island of Jeju Island and 2 peaks on an inhabited island to compare the distribution characteristics of seaweeds along the coast of Jeju Island from May to December 2018. A total of 101 species of seaweeds were surveyed, including 13 species (12.9%) of green algae, 24 species (23.8%) of Phaeophyta, and 64 species (63.4%) of Rhodophyta. The largest number of seaweeds appeared in May and the fewest in October, showing typical features of a temperate sea area. The number of seaweed species that appeared was 66 and 65 species at the water depths of 5 m and 8 m, respectively, and the largest was 74 species at 12 m. The number of seaweeds that appeared by area was the largest at 66 species on Udo Island, an eastern island near Jeju Island, and the lowest at 27 species in Pyoseon-ri, an eastern part of Jeju Island. The important values of emerging species were high in the order of, Ecklonia cavaand Corallina crassissima at 21.1% and 20.3%, respectively, Corallina aberransat 9.2%, Amphora ephedraeaat 6.2%, and Sargassum macrocarpumat 4.4%. Among seaweeds, an average of 11.2 species of coralline algae appeared, and the mean importance value was 32.6% in the sear area. The lowest importance value was 14.7% on Udo Island, and the highest was 41.0% in Pyoseon-ri. The mean ecological evaluation index (EEI) of seaweed colonies ranged from 2.1 to 10. It was the lowest at the water depth of 12 m in Pyoseon-ri in May and June and was 7.3 or higher in other areas, indicating good condition. This study rated the standardized ecological grade I for the water depth of 12 m on Udo Island and grade II for the water depths of 5 m and 8 m in Sagye-ri and on Chujado Island. Grade III was the water depth of 5 m and 12 m in Pyoseon-ri and Guideok 2-ri and the water depth of 5 m and 8 m in Pyeongdae-ri, and grade IV was the water depth of 8 m in Guideok 2-ri.

• Korean journal of applied entomology
• /
• v.34 no.4
• /
• pp.360-367
• /
• 1995

The relative toxicity of abamectin was assessed to the predatory mite Amblyseius womersleyi Schicha and to dicofol-resistant and -susceptible twospotted spider mite (TSM) Tetranychus urticae Koch in the laboratory. Abamectin was much les toxic to the predator than to the spider mite. At 0.12 and 0.6 ppm, all TSM adult females of the tow strains were killed within 48 h after dipping n the solutions. The lower concentrations (0.06 and 0.012 ppm) killed more than 77% of TSM female adults of the two strains at 120 h after treatment. However, abmectin did not significantly affect the survival and mobility of A. womersleyi female adults at a concentration of 0.12 ppm but the mortality was slightly increased up to 20~23% at 0.6 and 6 ppm. Abamectin did not significantly affect hatchability of one-day old TSM eggs at 0.06~0.6 ppm. The Four-day old eggs were much more susceptible to abamectin than one-day old eggs were. Within 0.006-6 ppm, abamectin did not affect the hatchability of A. womersleyi eggs and the development of resulting immature predators. When the predator female adults were dipped in 0.6 and 0.12 ppm solution, their reproduction was not affected, but at 6 ppm it was decreased by 35%. However, the reproduction of TSM reduced significantly at concentrations between 0.006 and 0.6 ppm. The differential toxicity of abamectin between TSM and the predator could be of practical importance in managing spider mite populations in the field. Abamectin at selective sublethal concentrations (i.e., 0.012~0.06 ppm) could be of value in adjusting predator/prey ratios in integrated management of spider mites.

• Journal of Service Research and Studies
• /
• v.13 no.2
• /
• pp.181-203
• /
• 2023

YouTube exhibits a hybrid personality, incorporating traits of both over-the-top (OTT) and personal broadcasting platforms. However, limited research has investigated these hybrid characteristics, particularly in the context of paid YouTube channel memberships. Therefore, building upon consumption value theory and prior literature, this study examines the influence of consumption value factors associated with paid YouTube channel memberships on usage satisfaction and continuance intention. Specifically, the study identifies four perceived consumption value factors (functional, social, emotional, and epistemic values) within the paid YouTube channel membership context and assesses their impact on usage satisfaction and continuance intention. Additionally, the study explores the moderating role of conditional value (the experience of watching live streams on paid YouTube channels) in these relationships. Data was collected via an online survey from Korean adults who subscribed to multiple paid YouTube channel memberships, resulting in 274 responses. The proposed hypotheses were tested using structural equation modeling (SEM). The SEM results indicate that all four consumption value factors significantly influence usage satisfaction, with usage satisfaction in turn positively affecting continuance intention. Furthermore, the study reveals that conditional value moderates the relationships between functional/emotional values and usage satisfaction, as well as between usage satisfaction and continuance intention. This study is the first to focus on YouTube channel paid memberships, which encompass characteristics from both OTT and personal broadcasting platforms. It is anticipated that this research will offer insights to personal broadcasters and stakeholders regarding the motivational factors that impact user satisfaction and encourage subscriptions to channel memberships.

• Journal of Service Research and Studies
• /
• v.13 no.2
• /
• pp.41-61
• /
• 2023

The universal form of life in the era of the 4th industrial revolution can probably be summarized as the keyword "non-face-to-face". In particular, in terms of consumption activities, face-to-face contact is gradually changing to a system that minimizes, and offline stores are rapidly changing to non-contact services through kiosks and robots. The social structure is also changing with the passage of time, and most fundamentally, our dietary consumption patterns are changing. In particular, the increase in single-person households and the aging population are having a great impact on changes in the food service industry, which is closely related to dietary life. The HMR (Home Meal Replacement) market has grown significantly as the labor of cooking at home has decreased and the use of substitute foods has increased. As the size of the market has grown, the types of businesses that provide products have also diversified. The development of technology, non-face-to-face culture, and corporate management efficiency are intertwined, and unmanned stores are spreading recently. In this study, service quality attributes of HMR unmanned stores, where competition is gradually intensifying, are classified, and service quality classification using the Kano model and Timko's customer satisfaction coefficient are calculated to provide implications for service management based on customer satisfaction. As a result of the analysis, 'products with short cooking time' and 'variety of products (menu)' were classified as attractive qualities, and 'cleanliness inside/outside of the store' and 'products at reasonable prices' were classified as unified quality. In addition, 'convenience of self-checkout process' was classified as a natural quality, and 'convenience of in-store passage' was classified as an indifferent quality. Furthermore, when the service factor was satisfied within the HMR unmanned store, the factor with the highest satisfaction coefficient was 'product (menu) variety', and the factor with the highest dissatisfaction factor was 'convenience of self-checkout process'. Through the results of this study, it is intended to derive priorities in service quality management of HMR unmanned stores and provide strategic implications for related businesses.