• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.64-70
• /
• 2006

The optical element was usually used in optical devices and optical transfer devices, but it has been recently used in communication, computer and medical equipment. With the development of very high speed optical-communication, the development of the kernel parts of optical communication has also increased. Presently, the alignment of the optical element is time consuming, and an effective alignment algorithm has not yet to be developed. In this paper, the alignment automation of the optical element is studied. The ultra precision stage is applied to an optical element alignment to improve the accuracy of the alignment. The automation program of the optical element alignment is developed by LabVIEW programming to save the alignment time. The alignment algorithms of the optical element consist of field search and peak search algorithms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.81-83
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of LNC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The generated NLC pretilt angles are about $3^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle measured at about $1.7^{\circ}$ lower on the glass substrate than by thin plastic substrate. It is considered that this alignment may be attributed to roughness of micro groove substrate. The tilt angle increases with increasing baking temperature for making polyimide layer using glass substrate. It was concluded that pretilt angle in the polyimide surface is attributable to the increasing of imide rato.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.435-442
• /
• 2016

For inertial navigation systems, initial information such as position, velocity and attitude is required for navigation. Self-alignment is the process to determine initial attitude on stationary condition using inertial measurements such as accelerations and angular rates. The accuracy of self-alignment is determined by inertial sensor error. As soon as an inertial navigation system is powered on, the temperature of accelerometer rises rapidly until temperature stabilization. It causes acceleration error which is called temperature stabilizing error of accelerometer. Therefore, temperature stabilizing error degrades the alignment accuracy and also increases alignment time. This paper suggests a method to calculate azimuthal attitude using curve fitting of horizontal control angular rate in fixed-gain self-alignment. It is verified by simulation and experiment that the accuracy is improved and the alignment time is reduced using the proposed method under existence of the temperature stabilizing error.

• Journal of Korean Society of Transportation
• /
• v.12 no.3
• /
• pp.5-13
• /
• 1994

In the fields of rail and road design, most vertical alignment design have been thus far heavily dependent upon trial-and-errors of experienced engineers. However, it has long been inefficient in productivity of designing process. In order to overcome this inefficiency, this paper presents the optimal vertical alignment design method using mathematical optimization techniques. For optimization, mathematical model to minimize the construction cost is formulated and the separable programming technique and the Zoutendijk method are introduced to solve it. As result, it is shown that this optimization technique can give efficient solutions to all vertical alignment design fields with properly-estimated cost function.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.339-344
• /
• 2019

Global sequence alignment in search of similarity or homology favors larger size of the sequence because it keeps looking for more similar section between two sequences in the hope that it adds up scores for matched part in the rest of the sequence. If a substantial size of mismatched section exists in the middle of the sequence, it greatly reduces the total alignment score. In this case a whole sequence would be better to be divided into multiple sections. Overall alignment score over the multiple sections of the sequence would increase as compared to global alignment. This method is called multiple local alignment. In this paper, we implement a multiple local alignment algorithm, an extension of Smith-Waterman algorithm and show the experimental results for the algorithm that is able to search for sub-optimal sequence.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.77-84
• /
• 2009

Alignment error of the BGA lithography equipment is mainly caused by the dimensional change of the BGA panel which is generated during the manufacturing processes. To minimize the alignment error, 'mark alignment' algorithm in place of 'center alignment' algorithm was proposed and the optimal solution for the algorithm was derived by simple analytic form. The developed algorithm distributes evenly the alignment error over the whole panel which was evaluated by the numerical simulation. Finally, the developed algorithm was implemented to the controller of the lithography equipment and the alignment error was measured at the fiducial mark location. From the measurement, it is also concluded that the developed alignment algorithm be effective to reduce the maximum value of alignment error.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.12
• /
• pp.1233-1240
• /
• 2010

In the flat panel display and semiconductor industries, the visual alignment system is considered as a core technology which determines the productivity of a manufacturing line. It consists of the vision system to extract the centroids of alignment marks and the stage control system to compensate the alignment error. In this paper, we develop a Kalman filter algorithm to estimate the alignment mark postures and propose a coarse-fine alignment control method which utilizes both original fine images and reduced coarse ones in the visual feedback. The error compensation trajectory for the distributed joint servos of the alignment stage is generated in terms of the inverse kinematic solution for the misalignment in task space. In constructing the estimation algorithm, the equation of motion for the alignment marks is given by using the forward kinematics of alignment stage. Secondly, the measurements for the alignment mark centroids are obtained from the reduced images by applying the geometric template matching. As a result, the proposed Kalman filter based coarse-fine alignment control method enables a considerable reduction of alignment time.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.154-159
• /
• 2013

Alignment tolerance for EO/IR airborne camera using common optic is an important factor in stabilization accuracy and geo-pointing accuracy. Before airborne camera is mounted on the aircraft, defining alignment tolerance and verification of it is essential in production as well as research and development. In this paper we establish basic concept on the definition and elements of alignment tolerance for airborne camera and propose how to measure each of those elements. Components and the measurement sequence of alignment tolerance are as follows: 1) tolerance of alignment between EO and IR LOS. 2) tolerance of sensor alignment. 3) tolerance of position reporting accuracy. 4) tolerance of mount alignment

• Journal of Information Processing Systems
• /
• v.6 no.1
• /
• pp.121-128
• /
• 2010

Using information systems effectively requires an understanding of the organisation, management, and the technology shaping the systems. All information systems can be described as organisational and management solutions to challenges posed by the environment. The advances in information systems have affect on our day-to day lives. As the technology is evolving immensely so are the opportunities in a healthy way to prepare the organisation in the competitive advantage environment In order to manage the IS/IT based systems, it is important to have an appropriate strategy that defines the systems and provide means to manage them. Strategic Information Systems Alignment (SISA) is an effective way of developing and maintaining the IS/IT systems that support the business operations. Alignment of the IS/IT plans and the business plans is essential for improved business performance, this research looks at the key features of SISA in the changing business circumstances in Saudi Arabia.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.727-732
• /
• 2002

This study is to develop the model of alignment optimization based on design criteria by approaching through alignment of railway design and problems in economy, environment and technology for satisfying traffic volume of the main roads caused by economical and social developments. Now, Geographic Information System isn't applied when designing a present railway in home. And the design of railway alignment is still set on importance of transition curves and cant according to passenger comfort in abroad so tile study of railway alignment is at initiation phase so far. This paper is about decision of optimal alignment between two stations such as starting point and ending point automatically using GIS in optimization of railway alignment. A route between Sungsan city and Shinpung city is the training area and the study compared and evaluated optimal railway route by GIS automatically with present railway route designed. Present optimal fomulas was used in this study for optimization of railway alignment. The model of optimization of railway alignment was developed through topographical elements and it was mentioned by the model of road alignment because of the similarity in design of alignment. But the design of lateral track irregularities, cant fur passenger comfort and motion sickness fellowed by train rolling have to be considered more. Anyway, this study farmed the basis of using GIS and the study should be keep going on in the future.