• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.895-902
• /
• 2015

In this paper, finite element analysis of a cycloidal pitch reducer for a 2 MW-class wind turbine is reviewed. The system is composed of one cycloid set, one spur gear set, an input shaft, an output shaft, and a housing. The system was also evaluated for stability by analyzing spur gear strength according to ISO 6336. An analysis of the natural vibration characteristics of the 2 MW-class wind turbine cycloid pitch reducer was performed with attention to critical speed with input mass unbalance, output mass unbalance, spur gear transmission error, cycloid gear transmission error, and excitation frequency.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.55-59
• /
• 2012

This study performs the bending and contact stress analyses for a pair of mating gears during rotation. The interested gears are used for a railway reducer. In general, the railway reducer needs high speed rotation, which leads to a large gear ratio. Thus, it is not easy to apply finite element method to investigate the strength performance, since the size of a gear is much larger than that of a pinion. In this study, the bending and contact stresses determined from FEM are compared with the values determined from the ISO code.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.11-11
• /
• 2017

지속적인 고령화 추세에 따라 여성과 고령층의 노동력이 차지하는 비율이 높아지고 있어, 사용하기 편리한 소형농기계의 요구가 증가하고 있는 실정이다. 본 연구에서 사용한 소형 관리기는 정식 작업 전 경운, 정지 등 다양한 작업이 가능한 농기계이다. 본 연구에서는 소형 관리기에 토크 측정 시스템을 구성하였으며, 작업 중 가장 큰 부하를 받는 구굴 작업 부하를 측정하였다. 또한, 작업 시 가장 직접적으로 영향을 받는 PTO (Power Take Off) 기어의 부하 용량(load capacity)을 기어 해석 소프트웨어를 이용하여 분석하였다. PTO 기어의 부하 용량은 안전율, 피로수명을 대상으로 평가하였다. 측정된 부하 데이터는 변동 하중이므로, 부하 크기와 빈도수의 규칙적인 신호로 단순화하기 위하여 레인플로우 카운팅 방법을 사용하였으며, SWT (Smith-Watson-Topper) 방법을 이용하여 공칭 토크를 계산하였다. PTO 기어의 안전율은 ISO 6336, 피로 수명은 마이너 법칙(Miner rule)을 이용하여 계산하였다. PTO의 변속 단수 총 2단이며, 5개의 스퍼 기어로 구성되어 있다. 시뮬레이션 결과, 소형 관리기의 주행 속도 또는 PTO의 회전속도 증가에 따라 PTO에서 발생하는 평균 부하가 크게 나타났다. 또한 주행 단수 및 PTO 기어 단수가 증가할수록 기어의 안전율과 피로 수명이 감소하였으며, 특히 PTO 기어의 안전율은 접촉 응력에서의 안전율보다 굽힘 응력에서의 안전율이 급격하게 감소하였다. 소형 관리기의 PTO 수명은 주행 단수 2단, PTO 단수 2단 일 때 가장 적게 나타났다. 따라서 소형 관리기의 주행 속도와 PTO 회전 속도를 저속으로 작업하는 것이 PTO 기어의 수명에 더 유리할 것으로 판단된다.

• Korean Journal of Agricultural Science
• /
• v.43 no.3
• /
• pp.441-449
• /
• 2016

Agricultural tractors are designed using the empirical method due to the difficulty of measuring precise load cycles under various working conditions and soil types. Especially, directly drives various tractor implements, the power take off (PTO) gear. Therefore, alternative design methods using gear design software are needed for the optimal design of tractors. The objective of this study is to simulate fatigue life of the PTO gear according to the operating point of the tractor engine. The PTO gear was made with SCr415 alloy steel with carburizing and quenching treatments. The fatigue life of the PTO gear was simulated by using bending and contact stress according to the torque of the load levels. The PTO gear simulation was conducted by the KISSsoft commercial software for gear analysis. Bending and contact stress were calculated by the ISO 6336:2006 Method A and B. The simulation of fatigue life was calculated by the Miner's cumulative damage law. The total fatigue life of tractors can be estimated to 3,420 hours; thus, 3,420 hours of fatigue life were used in the simulation of the PTO gear of tractors. The main simulation results showed that the maximum fatigue life of the PTO gear was infinite fatigue life at maximum engine power. Minimum fatigue life of the PTO gear was 19.61 hours at 70% of the maximum engine power. Fatigue life of the PTO gear changed according to load of tractor. Therefore, tractor work data is needed for optimal design of the PTO gear.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.8-16
• /
• 2021

This study develops a shaft analysis model for the optimization of the power transmission system. The finite element method was used for the shaft analysis model. The shaft and gear were assumed Timoshenko beams. Strength was evaluated according to DIN 743, and gear misalignment was calculated through ISO 6336 and the coordinate system rotation. The analysis software for a power transmission system was developed using Visual Studio 2019. The analysis results of the developed program were compared with those of commercial software (MASTA, KISSsoft, and Romax). We confirmed that the force, deformation, and safety factors at each node were the same as those of the commercial software. The absolute value of the gear misalignment of the developed program and commercial software was different. However, the gear misalignment tended to increase with increasing the displacement in the tooth width direction.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.1-11
• /
• 2016

Purpose: The gear strength of a new mechanical transmission designed to increase the loading weight of small 4.8 kW tracked agricultural transporters was analyzed. Design improvements to increase the gear strength and reduce the gear weight were proposed after examining the parameters. Methods: Sixteen operators from three regions were surveyed to obtain the usage profile of small 4.8 kW transporters. Gear strength was evaluated by calculating contact stress and tooth root stress using commercial software following ISO 6336. Results: From the strength calculation for each gear pair, contact stress smaller than tooth root stresses were produced in all gear pairs. The safety factors in most cases exceeded 1.0, except in the case of gear pair II in group II. The design life of the transporter using gear pair II in group II was 42% under harsh conditions-thus, this design life needs improvement. A robust design was proposed by examining the relevant parameters (face width and profile shift coefficient) to increase the design life of the transporter. In addition, a lightweight design for gear pair I in group II that was considered overdesigned was proposed by examining the face width to reduce the weight of the drive gear by 42% and that of the driven gear by 30%. Conclusions: The Safety factor for the design life was examined through a gear strength analysis. After examining the relevant parameters, conditions for strength improvement were proposed to increase design life or adjust overdesigned gear. However, load conditions differ depending on the working conditions or user's preferences; therefore, it is necessary to conduct further studies in various regions.

• Korean Journal of Agricultural Science
• /
• v.47 no.2
• /
• pp.327-335
• /
• 2020

The purpose of this study was to analyze the load distribution and contact safety factor for the power take off (PTO) gear of a 71 kW class agricultural tractor. In this study, a simulation model of the PTO gear-train was developed using Romax DESGINER. The face load factor and contact safety factor were calculated using ISO 6336:2006. The simulation time was set at 2,736 hours considering the lifetime of the tractor, and the simulation was performed for each PTO gear stage at the engine rated power conditions. As a result of the simulation, the face load factors for the driving gear at the PTO 1^st, 2^nd and 3^rd stages were 1.644, 1.632, and 1.341, respectively. The contact safety factors for the driving gear at the PTO 1^st, 2^nd and 3^rd stages were 1.185, 1.216, and 1.458, respectively. As the PTO gear stage was increased, the face load factor decreased, and the contact safety factor increased. The load distributions for all the PTO gears were concentrated to the right of the tooth width. This causes stress concentrations and shortens the lifespan of the gears. Therefore, it is necessary to improve the face load factor and the contact safety factor with macro-geometry and micro-geometry.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.650-655
• /
• 2016

Gears are components of transmission which transmit the power of an engine to a machine and offer numerous speed ratios, a compact structure, and high efficiency of power transmission. Gear train design in the automotive industry uses simulation software. However, PTO (Power Take-Off) gear design for agricultural applications uses the empirical method because of the wide range of load fluctuations in agricultural fields. The PTO is an important part of agricultural tractors which transmits the power to various tractor implements. Therefore, a simulation was essential to the optimal design of the PTO. When the PTO gear is optimally designed, there are many advantages such as low cost, reduced size, and light weight. In this study, we conducted the bending and contact safety factor simulation for the PTO gear of an agricultural tractor. The bending and contact safety factors were calculated on ISO 6336 : 2006 by decreasing the face widths of the PTO pinion and wheel gear from 18 mm at an interval of 1 mm. The safety factor of the PTO gear decreased as the face width decreased. The contact safety factors of the pinion and wheel gear were 1.45 and 1.53, respectively, when the face width was 18 mm. The simulation results showed that the face width of the PTO gear should be greater than 9 mm to maintain the bending and contact safety factors higher than 1. It would be possible to reduce the weight of the PTO gear for different uses and working conditions. This study suggests that the possibility of designing an optimal PTO gear decreases as its face width decreases.