• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.278.2-278.2
• /
• 2014

We have investigated the highly flexible and transparent Si-doped $In_2O_3$(ISO)/Ag/ISO multilayer grown on polyethylene terephthalate (PET) substrates using a roll-to-roll sputtering system. The electrical and optical properties of ISO/Ag/ISO multilayer electrodes depended on the insertion of a nano-size Ag layer. Due to the high conductivity of a nano-size Ag layer, the optimized ISO/Ag/ISO multilayer electrodes showed the lowest resistivity of $3.679{\times}10^{-5}Ohm-cm$, even though the ISO/Ag/ISO multilayer electrodes was sputtered at room temperature. Furthermore, the ISO/Ag/ISO multilayer electrodes exhibited a high transmittance of 86.33%, because of the anti-reflection effect, comparable to Sn-doped $In_2O_3$ (ITO) electrodes. In addition, the ISO/Ag/ISO multilayer electrodes had a very smooth surface morphology without surface defects and showed good flexibility. The flexible OSCs fabricated on ISO(30nm)/Ag(8nm)/ISO(30nm) multilayer electrode showed a power conversion efficiency of 3.272%. This result indicates that the ISO/Ag/ISO multilayer is a promising transparent conducting electrode for flexible OSCs.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.85-85
• /
• 2017

ISO (International Organization for Standardization) is an independent, non-governmental international organization with a membership of 163 national standards bodies (NSB). The ISO standards are developed and processed within the technical committees (TC) or their subcommittees (SC) dealing with the different subject matters. The first technical committee, ISO/TC1, deals with screw threads and was created back in 1947. While, more recently, TC 309 was created to standardize organizational governance. The ISO technical committee in the field of metallic coatings was created in 1962 with the title ISO/TC107- Metallic and other inorganic coatings. This ISO/TC107 technical committee is dealing with the standardization of the characteristics of protective and decorative metallic coatings applied by electrolysis, fusion, vacuum or chemical means, mechanical deposition and ion plating. similarly, it also covers the standardization of the characteristics of protective and decorative non-metallic coatings (excluding paints and other organic coatings) on metal surface applied by electrolysis, fusion, vacuum or chemical means. Scope is further extended to the Standardization of the preparation of the substrates prior to the deposition of metallic and inorganic coatings. There are a total of 144 existing ISO standards published by this technical committee and has 19 participating countries (P-members) and 24 observing countries (O-members). Korean Agency for Technology and Standards (KATS), being the secretariat of ISO/TC107, is constantly supporting this technical committee for the development of standards and related activities.

• Journal of the Korea Computer Graphics Society
• /
• v.3 no.2
• /
• pp.85-97
• /
• 1997

This study is intended to propose methods of iso-surfaces representation in visualizing the stress distribution in 3-dimensional solids computed by finite element method, and to develop efficient algorithms related to iso-surfaces, and also to exploit the practical application to various data visualizations. This paper suggests practical methods of creating and rendering iso-surfaces, and methods of surface smoothing which removes local irregularity on the surface. Also devised in this study are various methods of rendering stress distribution with the aid of iso-surfaces. Their effectiveness and usefulness have been tested and verified through actual implementaion of a finite element analysis software and case studies using the software.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.116-121
• /
• 2005

The objective of this paper is to compare the site-to-site variability of ISO 10844 pass by the noise test sites. In order to investigate the site-to-site variance of test surfaces, European commercial tires are tested at seven different test sites. Three Korea test sites and four Europe test sites are selected. The pass by noise test is done according to a 2001/43/EC regulation. Although the ISO surface has a very specific track composition, it does not reduce the variation of pass by noise measurements over the surface of test sites. This paper shows that the test results of pass by noise level are different depending on the test sites. The correlation obtained in this work is able to predict the pass by noise level for certain test site using the data measured from another test site. The prediction value is range with an error within 1dB(A).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.252-256
• /
• 2001

Scattering of surface materials has been known as one of the most important aspects in evaluating the acoustics of concert halls are designed. One of the methods that can reduce the errors in estimating the reverberation time and other acoustic parameters through computer modeling is to calculate scattering coefficient of surface materials. However. so far, no objective and reliable methods measuring scattering coefficient has been suggested. In this situation, ISO has suggested the method of measuring the random-incidence scattering coefficient on surfaces in diffuse field, whereas AES has introduced a method on directional-incidence in free field. In this study, the scattering coefficients of five kinds of hemispheres (1.5, 2.0. 2.5. 3.0. 3.5cm) were measured by using the ISO method in 1：10 reverberation chamber. It was found that 3.0cm hemisphere has the highest scattering coefficient satisfying 95％ reliability.

• Journal of Surface Science and Engineering
• /
• v.26 no.6
• /
• pp.285-290
• /
• 1993

A series of samples were prepared by treating natural zeolite from Kampo area with HCl and NaOH. And, the adsorption characteristics of some liquid samples were investigated by the Diamond-Kinter method. The adsorption amount of all liquid investigated was more effective in acid treatment than in alkali treatment. In the case of n-, iso-C3H7OH, thed adsorption amount of n-form which has smaller molecular size was larger. Similar tenedncy was observed in n-, iso-C4H9OH, but the amount was lower than n-, iso-C3H7OH. In CHCl3 and CCl4, that of CHCl, which is smaller molecular size and has polarity, was far lager. From the view of the molecular size, adsorption amount of C6H5CH3 and p-C6H4(CH3)2 showed the characteristics of surface activity rather than chemical treatment.

• Journal of Korea Multimedia Society
• /
• v.25 no.6
• /
• pp.793-806
• /
• 2022

As the IMO introduced MASS (Maritime Autonomous Surface Ships), ISO(International Organization for Standardization) announced ISO 19847 of a maritime data sharing standard for collecting and remotely managing data of ship systems. Previous literature evaluated the risk using HAZOP for ISO 19847 and proved that risk assessment is useful through experiments. However, redundancy of ISO 19847 ship data server which is one of the risk reduction method suggested in previous literature, was designed but couldn't tested due to the limitations of the conditions. So, in this study, to prove the usefulness of the ship data server redundancy of ISO 19847 which was not tested in previous literature. It based on the design of previous literature, and the network of ship data servers was modeled using the SES/DEVS format and simulated using the DEVS# open source library.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.105-113
• /
• 1994

The amount of nitrogen gas adsorbed by Spherocarb and Sucrose Char was measured as a function of the relative pressure with temperature being kept constant at 77 to 184K. Isotherms at different temperatures were obtained by keeping the adsorbent at a constant temperature using liquid nitrogen, iso-pentane, n-pentane, ethyl alcohol, and iso-propyl alcohol slush baths. The objective for this study is to provide information on the specific surface area and pore volume by analyzing the experimental data using adsorption models such as the Brunauer-Emmett-Teller and Dubinin-Radushkevich models.

• International Journal of Safety
• /
• v.7 no.1
• /
• pp.26-29
• /
• 2008

The purpose of this study is the measurement of whole-body vibration for different road surfaces. Experimental measurements were taken on asphalt, cement, and off-road surfaces as defined by ISO 2631-1. Each experiment was conducted under the same set of conditions (measurement duration, times, speed, vehicle type). Measurement duration was 10 minutes and 3 separate measurements were taken on each road surface. Vehicle speed was 60km/h. In accordance with ISO 2631-1, an acceleration sensor is set up between the driver's seat and the human body. For evaluation, RMS(root-mean-square) values were taken as suggested by ISO 2631-1. The results suggest "health guidance caution zones", and the evaluation was based on obtaining the vector sum with "health guidance caution zones".

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.371-376
• /
• 2003

The objective of this paper is to compare the site-to-site variability of ISO 10844 pass-by-noise test sites. In order to investigate the site-to-site variance of test surfaces, European commercial tires are tested at seven different test sites. Three Korea test sites and four Europe test sites are selected.. The pass by noise test is executed according to a 2001/43/EC regulation. A]though the ISO surface has a very specific track composition, it does not reduce the variation of pass-by-noise measurements over the surface of test sites. This paper shows that the test results of pass-by-noise level are different depending on the test sites. The correlation obtained in this work is able to predict the pass by noise level for certain test site using the data measured from another test site. 17he prediction value is range with an error within 1dB(A).