• 해양환경안전학회지
• /
• 제24권5호
• /
• pp.597-603
• /
• 2018

본 연구는 수중 및 여가활동에 대한 수요 증가에 따른 다이버들을 위한 보트의 구조 건전성에 관한 것이다. 대상 선박은 선체 중앙부에 Moon Pool 구조를 갖추고 있는 소형 쌍동선이며, 연구수행은 ISO Rule 기반의 허용응력 산정을 통한 유한요소 해석법을 이용하여 연구를 수행하였다. 연구수행 방법은 ISO 12215-5와 TC118.1225-7에서 정의하고 있는 계수를 산정하고, 종방향굽힘 모멘트, 비틀림 모멘트, 선저슬래밍 하중 등을 적용하여 ISO 기준과 허용응력 설계법(ASD)에 의한 적합성 여부를 판정하고 유한요소해석(FEA)를 활용한 극한강도 설계법을(LFRD)를 적용하여 수행하였다. 연구결과 문풀형 구조를 가진 선박도 ISO규정, KR규정을 적용하여 설계시 구조적 건전성을 확보하는 것으로 사료된다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.111-111
• /
• 2017

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.1-7
• /
• 2017

It has been developed large mooring fittings having the capacity of 160 tons and 180 tons installed on 170K LNG FSRU. The finite element analysis for the mooring fittings was carried out in order to check the structural integrity and to confirm satisfaction of the rule requirements. The 3 kinds of mooring fittings such as chock, bollard and universal fairlead are selected for FE analysis and load test. According to the FE analysis results, all the stress levels satisfied the acceptance criteria guided by the IACS UR A2, ISO standard, ship rules and OCIMF. As test results under design load, no structural defects were found.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.809-815
• /
• 2002

For clarifying the mechanical phenomena of thermal elasto-plastic behavior on the multi-spot welded joints, this study has tried to carry out three-dimensional thermal elasto-plastic analysis on them. However, because the shape of multi-spot welded joints is not axi-symmetric, unlike the case of single-spot welded joint, the solution domain for simulation should be three-dimensional. Therefore, in this paper, from the results analyzed using the developed the three dimensional unstationary heat conduction and thermal elasto-plastic programs by an iso-parametric finite element method, mechanical characteristics and their production mechanism on single- and multispot welded joints were clarified. Moreover, effects of pitch length on temperature, welding residual stresses and plastic strain of multi-spot welded joints were evaluated, indicating that a pitch of 30mm was advantageous compared to a pitch of 15mm.