• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.69-85
• /
• 2010

Currently, environmental contaminants that can cause Aromatic types of hydrocarbons, less than 1% made of Aromatic Free kind of used products, soybean oil products with linseed oil with the products, rice products using a wide range of environmentally ecological ink since 2000 is released quickly. All materials used in printed material, if the green is the best way to print the composite materials in industrial applications, because each process on the print quality and productivity, there can be many differences in this experiment because it accounts for a large proportion in the print general ink in the ink section and the International color standards(ISO2846-1:2006) certified ecological ink were compared. Therefore, in this paper has the ink released from the same company, each common general ink and ecological ink in the same condition which results were focused on whether the emerging international color standard(ISO 2846-1:2006) recognized for environmentally ecological ink printed color reproduction of the actual offset(color reproduction) how conformity to ISO 12647-2 standard color on the basis of the offset would check Color Reproduction. Based on the results of the experiments of this study, given the ecological ink coated paper, uncoated paper both color difference and the gamut of the ISO 12647-2 standard is suitable for ecological ink, the ink's color gamut reproduction, even more than existing international standards, there is no confirmed that the correct color reproduction possible. Using environmentally ecological ink industries is expected to respond to environmental policy.

• 프린팅코리아
• /
• 제13권2호
• /
• pp.103-107
• /
• 2014

국내 인쇄산업이 국제적인 경쟁력을 갖고 전 세계 시장을 무대로 활동하기 위해서는 국제적인 표준에 맞는 품질 및 공정관리가 선행돼야 한다. ISO 12647-2의 인쇄산업기술 표준을 기반으로 현재 미주지역에서는 IDEAlliance(International Digital Enterprise Alliance)의 G7인증이, 유럽에서는 독일 FOGRA(Graphics Technology Research Association : 독일인쇄기술협회)와 스위스 UGRA(Association for the Promotion of Research in the Graphic Arts Industry : 인쇄산업진흥연구협회)의 PSO(Process Standard for Offset)가, 그리고 일본에서는 JAGAT(Japan Graphic Arts : 일본인쇄산업기계공업회)의 JAPAN COLOR가 그 표준화의 중심에 있다.

• 펄프종이기술
• /
• 제45권5호
• /
• pp.1-13
• /
• 2013

This study found fit optimum C, M, Y, K solid density and $CIEL^*a^*b^*$ value to paper & ink as well as check about printing machine state for color management in H-UV waterless off-set printing first. These values applied to GRACoL G7 calibration method. This method is one of color standard management method of printing. GRACoL G7 calibration method is possible stable tone reappearance by controlling gray balance by NPDC(Natural Printing Density Curve). Also, this study used values to make device profile as result that is gotten by application of GRACoL G7 calibration method. This profile was applied to CMS(Color Management System) of H-UV waterless off-set printing, and the result was possible by color management that correspond in printing quality standard of ISO 12647-2 and GRACol 2006 specifications.

• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.69-84
• /
• 2007

Producing printing plate is essential progress to do offset printing. In this Film-less period, the more PS plate becomes extinct, the more the age of the Plate-Making of Exposure declines the place to stand. To do offset printing, the CTP (Computer to Plate) is taking a place of PS plate that covers speed, quality and economical problems. The biggest advantage of using CTP is that laser directly goes to the plate, thus there are no dust from the Plate-Making of Exposure. It is also theoretically able to print $200lpi{\sim}300lpi$ as well as print 1751pi, because it has over 2400dpi resolution. The high quality printing could be available inside of the country, if printing machine keeps the optimum condition in offset printing. The CTP has many advantages, however there is a difficulty for the operators to preserve the equipment. The actual circumstance is that they cannot make a decision about how many dots need to be generated, and also it is necessary to know how to establish the setup at RIP on CTP to make the optimum condition output. If offset printing machine keeps the optimum condition, it would be able to print up to high quality printing however it is hard to comment what is the optimum condition for the printing machine. Anyone could say easy subjectively that machine is in the optimum condition, however it is objectively hard to estimate by number. In this research GATF / Plate Test target used to analyze the image and to make numerical value of the optimum condition of the CTP. It also used GATF / The sheep fed test printing 5.0 to know the density of the color representation, dot gain and gray balance for the optimum condition of the print machine. The purpose of this research is to represent the ISO 12647-2 which is the international standard with domestic printing equipments.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2007년도 추계 학술논문 발표회
• /
• pp.13-28
• /
• 2007

Producing printing plate is essential progress to do offset printing. In this Film-less period, the more PS plate becomes extinct, the more the age of the Plate-Making of Exposure declines the place to stand. To do offset printing, the CTP (Computer to Plate) is taking a place of PS plate that covers speed, quality and economical problems. The biggest advantage of using CTP is that laser directly goes to the plate, thus there are no dust from the Plate-Making of Exposure. It is also theoretically able to print 200lpi${\sim}$300lpi as well as print 1751pi, because it has over 2400dpi resolution. The high quality printing could be available inside of the country, if printing machine keeps the optimum condition in offset printing. The CTP has many advantages, however there is a difficulty for the operators to preserve the equipment. The actual circumstance is that they cannot make a decision about how many dots need to be generated, and also it is necessary to know how to establish the setup at RIP on CTP to make the optimum condition output. If offset printing machine keeps the optimum condition, it would be able to print up to high quality printing however it is hard to comment what is the optimum condition for the printing machine. Anyone could say easy subjectively that machine is in the optimum condition, however it is objectively hard to estimate by number. In this research GATF / Plate Test target used to analyze the image and to make numerical value of the optimum condition of the CTP. It also used GATF / The sheep fed test printing 5.0 to know the density of the color representation, dot gain and gray balance for the optimum condition of the print machine. The purpose of this research is to represent the ISO 12647-2 which is the international standard with domestic printing equipments.