• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.244-252
• /
• 2001

A comprehensive analytical method of endocrine distruptors[i.e., nonylphenol(NP), octylphenol(OP), bis(2-ethylhexyl)phthalate(BEHP)] is fish samples was developed using two internal standards. This method employed closed culture tube extraction with dichloromethane and solvent exchange to iso-hexane and SPE(2g) aminopropyl column, followed by determination on gas chromatograph linked to mass spectrometer(GC/MS) operated in the single ion monitoring(SIM) mode. The recoveries of nonylphenol and octyphenol in the range of $0.2{\sim}20{\mu}g/g$ using 1-phenyl decanol as one internal standard were over 75%, and recovery of bis(2-ethylhexyl)phthalate in the range of $0.4{\sim}40{\mu}g/g$ using bis(2-ethylbutyl)phthalate(BEBP) as the other internal standards was showed over 102%. The present method was applied to fish samples from Korea and UK. The range of concentrations for nonylphnol(NP) and bis(2-ethylhexyl)phthalate in Korean fish were $0.02{\sim}0.06{\mu}g/g$ in 2 samples and $0.18{\sim}2.03{\mu}g/g$ in 9 samples respectively, but bis(2-ethylhexyl)phthalate(BEHP) in UK samples was found $2.99{\mu}g/g$ in just 1 sample. But octylphenol(OP) was not dected in any samples by this method. This two internal standard method provides a more precise analytical tool to investigate endocrine disruptors in a biological matrices of limited quantity.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.2
• /
• pp.92-99
• /
• 2011

In Japan, bang machine has been considered to have problems about not only the impact force and frequency response which are different from the real impact sources such as children's jumping and running, but also damage in the wooden structure housing. Therefore, a new impactor for lower impact force to prevent demage in wooden structure housing was developed. The impact ball was adopted as the second standard impact source in JIS A 1418-2 and ISO 140-11. In the present study, floor impact sounds generated by impact ball with drop heights in four floors of mock-up building of Building Research Institute (BRI) similar to typical Japanese wooden structure housing were investigated and also compared to jumping sound. The results show that Impact ball sound dropped at 10 cm to 30 cm was most similar to jumping sound. And The impact sound levels at 250 and 500 Hz were more sensitive to drop height than other lower frequencies. The error that may occur from the difference of height of 10 cm up and down based on the standard drop height caused by the impact ball operated by human hands was approx. 1 dB or less only in its value of characteristic, but it must be carefully taken into Impact ball in the Korea Standard.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.518-523
• /
• 2008

The modular beam made of steel material is wholly responsible for the load stress of the structure, therefore securing the fire-resistant capacity of the steel beam is absolutely important. The economic efficiency achieved by minimizing the thickness of the fire-resistant board attached, is also essential at the same time. Accordingly, a study of optimization of the thickness and interval of fire-resistant boards shall be conducted side by side. Therefore, in this study we have anticipated fire-resistant capacity by using a general-purpose S/W for finite elements, ABAQUS(6.7.1), in order to propose the configurable conditions that can secure the optimal fire-resisting capacity of modular beam. As a result of this analysis, it was impossible to secure the fire-resistance capacity when directly attaching fire-resistant board(30mm) on the modular board in accordance with KS F 2257-1, and the fire-resistant boards were manufactured in shape of module in consideration of its installation interval rather than direct application.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.325-327
• /
• 2006

H.264/AVC는 ITU-T H.264와 ISO/IEC 14496-10(MPEG-4 Part 10)으로 승인된 새로운 국제 비디오 압축 표준이다. H.264/AVC는 압축부호화 효율(이하 압축률)이 높으며 MPEG-2나 MPEG-4등에 비해 압축률이 2배 이상 향상되었으나 복잡도 또한 훨씬 증가하였다. 월등한 압축성능 때문에 방송 분야(DTV 등), 저장용 시스템 분야(PVR 등)에 많은 응용 분야들에 적용하기 위한 움직임이 있다. 그러나, 디코더로 구현하면 복잡도 증가하는 문제가 발생한다. HD급을 지원하기 위한 메모리 대역폭의 경우 MPEG-2 HD에 비해 H.264/AVC만의 복잡한 움직임 보상으로 인해 2배 이상이 요구된다. H.264/AVC 디코더는 두 개의 참조픽처를 이용하여 움직임 보상하는 B-픽처와 쌍예측 픽처가있다. 여기서, 참조픽처를 각각 하나씩만 사용하여 디코딩 하면 기존의 복잡도를 줄일 수 있다. 본 논문에서 제안하는 방법은 하나의 참조픽처 선택으로 H.264/AVC 소프트웨어 디코더에서 움직임 보상을 한다. 이로 인하여 복잡도와 메모리 대역폭이 감소하는 방법을 제안한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.298-301
• /
• 2010

최근 전자업계의 중요한 화두 중 하나는 3D이다. 3D 입체 영상 기술은 미디어 환경을 변화시키고, 이에 발맞춰 방송환경 또한 변하고 있다. 고화질 3D 입체 방송은 기존의 2D 방송 서비스와 호환성을 유지하면서 시간적으로 2D 프로그램과 3D 프로그램이 혼용되어 제공되는 입체 방송 서비스가 될 것이다. 기존의 2D 기반 디지털 방송 서비스 환경에서 고화질 3D 입체 방송을 할 수 없다. 현재 국제 표준기구인 MPEG에서는 3D 서비스 방안으로 ISO/IEC 23002-3(MPEG-C part.3)이 표준화되었다. MPEG-C part.3에서 부가데이터인 depth map과 parallax map을 사용한다. 하지만 공간 주파수가 높은 영상의 depth map과 parallax map은 객체의 경계가 확실하지 않아 3D 입체 구현 시 객체의 경계면이 뭉개질 수 있다. 따라서 본 논문은 고화질 3D 입체 방송 서비스를 위한 전송 방안을 제시하고 있으며, MPEG-C part.3를 이용한 스테레오스코픽 영상 전송방안에 대해 소개한다.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.105-112
• /
• 2013

To meet the growing needs from a variety of stakeholders, the development of modern systems is getting more complex and thus, the systems failure in the actual operations can potentially become more serious. This is why several international or military standards on systems safety have been published. In spite of the importance of meeting those standards such as IEC 61508 and ISO 26262 in the systems development, the associated practical methods seem deficient since those standards do not provide them. The objective of this paper is to present a method to identify potential hazards in fulfilling the requirements of the safety standards. In particular, the approach taken here is based on applying the functional analysis that covers several levels of the system under development. Note, however, that in the most of the conventional methods for hazards identification, the analysis has been focused on the failure at or underneath the component level of the system. The hazards identification method in this paper would cover the level up to the system by utilizing the functions-oriented approach. The case study of the safety enhancement for locomotive cabs is also discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.799-802
• /
• 2012

본 논문은 기존의 헬스케어 서비스의 한계를 극복하기 위해 최근 대두되고 있는 스마트 헬스케어 서비스(smart healthcare service)에 관한 연구이다. 스마트 헬스케어는 스마트폰의 기능에 맞추어 기초체력 운동 지수, 섭취 칼로리, 심박 체크 등의 다양한 서비스를 제공할 수 있지만, 최근에는 보건의료서비스에 특화시켜 환자와 의사가 직 간접적으로 진료를 할 수 있게끔 하는 스마트폰 환경에서의 원격진료 서비스가 부각되고 있다. 그러나 헬스케어를 위한 HL7 CDA 표준의 문서 교환방식은 실시간 데이터 획득을 요구하는 원격진료 서비스 환경에 적합하지 못하다. 이에 본 논문에서는 HL7v2.x의 트리거 이벤트를 통한 메시지 전송방식과 HL7 CDA RIM(Reference Information Model)을 응용하는 실시간 HL7 의료정보 전송 방안을 제안한다.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.1
• /
• pp.8-14
• /
• 2007

In the product design process computer-aided engineering and optimization tolls are widely utilized in order to reduce the total development time and cost. Since several simulation tools are involved in the process, information losses, omissions, or errors are common and the importance of seamless information exchange among the tools has been increased. In this work, ISO STEP standards are adopted to represent the neutral format for structural analysis and optimization. The schema of AP209 defined the information of finite element analysis is used and the new schema is proposed to describe the information of structural optimization based on the STEP methodology. The schema is implemented by EXPRESS, information modeling language, and ST-Developer is employed to generate C++ classes and STEP Rose Library by using the schema denoted. To substantiate the proposed approach, the information access interfaces of the finite element modeling software (FEMAP), structural optimization software(GENESIS) and in-house topology optimization program are developed. Examples are shown to validate the information exchange of finite element analysis and structural optimization using STEP standards.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.191-193
• /
• 2019

ISO/IEC JTC1 WG11 Moving Picture Expers Group 과 ITU-T SC16 은 Joint Video Experts Team 을 구성하여 차세대 비디오 부호화 표준으로서 Versatile Video Coding(VVC)를 표준화 중이다. VVC 는 현재 블록의 화면내 예측 모드일 가능성이 높은 모드의 집합인 Most Probable Mode(MPM) 리스트를 유도하고, MPM 을 이용하여 효율적으로 화면내 예측 모드를 부호화한다. VVC 참조 소프트웨어는 주변 블록의 화면내 예측 모드가 일치하는지 여부에 따라 1 개 또는 2 개의 모드를 최종 후보 선택을 위한 과정인 Rate-Distortion Optimization(RDO) 과정에 추가한다. 하지만 현재 MPM 은 항상 첫 번째 후보로 Planar 모드가 위치하며 이로 인하여, 주변 블록의 화면내 예측 모드가 RDO 에 추가되지 않는 경우가 존재한다. 따라서 본 논문은 VVC 의 부호화기에서 주변 블록의 화면내 예측 모드가 고려되지 않는 경우가 존재하는 문제를 해결하기 위한 방법을 제안한다. 제안 방법은 MPM 유도 과정에서 RDO 에 포함할 후보의 개수를 수정하여 RDO 과정에 항상 주변 블록의 화면내 예측 모드가 추가되도록 한다. 본 논문은 실험을 통해 제안 방법이 약 0.04%의 부호화 효율을 향상시켰음을 보인다.

• Journal of the Society of Disaster Information
• /
• v.12 no.1
• /
• pp.32-39
• /
• 2016

We analyze BCM, COOP and other exotic advanced cases for making supporting programs relates with Disaster mitigation management in Public area. The outcome from this study explains what are requirements for proper activating the programs and what we need. In conclusion, we could understand importances of BIA, RA, Disaster mitigation activities, Contingency plan, Training, Correspond to disaster, Management of document except for system managing functions. It will be helpful to build supporting programs by meeting most of requirements of BCM at the same time.