• 제목/요약/키워드: ISCST3

검색결과 42건 처리시간 0.039초

대규모 단지조성 미세먼지 관리 방안 (Management Scheme According to Characteristics of PM-10 Occurred from Large Scale Development Site)

  • 권우택;이우식;홍상표
    • 환경영향평가
    • /
    • 제22권1호
    • /
    • pp.79-87
    • /
    • 2013
  • The purpose of this study is to establish PM-10 management manual for developing large scale sites by assessing the status of PM-10 reduction at ongoing large scale development sites. After analyzing the meteorological conditions and air quality characteristics of Sihwa MTV development site, ISCST3 (Industrial Source Complex Short Term Model 3) was implemented to predict PM-10 generation. The outcomes of ISCST3 modelling were utilized for verification of site survey data. As a result of applying air pollution modeling, the diffusion rate of PM-10 decreases according as the wind speed decreases. And the emission rate of PM-10 increase is linear to the concentration of PM-10. The reduction target of PM-10 can be derived quantitatively from the difference between the forecasted emission rate and the permissible emission limit of PM-10. The assessment of PM-10 characteristics which is deduced from ISCST3 and site survey can be practically applied to accomplish environmentally acceptable air quality manual for large scale development sites.

대단위배출원에서 기인한 입자상오염물질의 확산ㆍ추적을 통한 ISCST3모델과 수용모델의 비교연구 (The Study on the Comparison of the ISCST3 Model and Receptor Model by Dispersion Tracing of Particulate Matter from Large Scale Pollution Sources)

  • 전상기;이성철;박경선
    • 한국대기환경학회지
    • /
    • 제19권6호
    • /
    • pp.789-803
    • /
    • 2003
  • The purpose of this study is to compare the usefulness between Gaussian dispersion model and receptor model with the experimental result of the dispersion tracing of the particulate pollutants from Taean coal-fired power plants. For this purpose, the component analysis of the collected PM 10 samples was performed. In order to trace the pollution sources, factor analysis was done with the result of the component analysis. As a result of the correlativity analysis of the fifteen power plants' profiles offered by US EPA, the correlativity of No.11202 source profile showed highest rate up to 84.5%. Thus it was adopted as proper one and the contribution rate by each pollution source was calculated by Chemical Mass Balance (CMB)-8 model. The contribution rate, which was the effect rate of the power plants on each measuring point, were calculated with a range of 24∼52% and the standard error was below 0.9 $\mu\textrm{g}$/㎥. This indicates the selection of the source profile was appropriate. Also, the concentrations of each point were calculated by the ISCST3 which is suggested by US EPA as one of the regulatory Gaussian dispersion model. The calculation result showed that the predicted concentration was 50∼58 $\mu\textrm{g}$/㎥, comparing with the measured result of 9∼65 $\mu\textrm{g}$/㎥. It was found that the concentration calculated by ISCST3 was underpredicted. It was thought that the receptor model was more favorable than the Gaussian dispersion model in estimating the effect of the particulate matter on a certain receptive point.

대기확산모델을 사용한 공단주변지역의 대기오염물질농도 예측 및 평가 -ISCST3, FDM, AERMOD를 중심으로- (The Prediction and Evaluation Air Pollutants Concentration around Industrial Complex by using Atmospheric Dispersion Models -Based on ISCST3, FDM, AERMOD-)

  • 이화운;원경미;배성정
    • 한국환경과학회지
    • /
    • 제8권4호
    • /
    • pp.485-490
    • /
    • 1999
  • We will calculate concentration of air pollutants using ISCST3, FDM and AERMOD of models recommended in U. S. EPA which are able to predict concentration of short term for point source, complex like industrial complex, power plant and burn-up institution. Before executing model, as analyzing computational result of many cases according to selecting of input data, we will increasing predictable ability of model in limit range of model. Especially, we analyzed three cases-case of considering various emission rate according to time scale and not, case considering effect of atmospheric pollution materials removed by physical process. In our study, after comparing and analyzing results of three model, we choose the atmospheric dispersion model reflected well the characteristic of the area. And we will investigate how large the complex pollutant sources such as industrial complex contribute to atmospheric environment and air quality of the surrounding the area as predicting and estimating chosen model.

  • PDF

ISCST3을 이용한 돈사의 복합악취 영향 분석 (Impact Analysis of Complex Odor from Pigsty by Using ISCST3)

  • 권우택;홍상표;이우식
    • 한국산학기술학회논문지
    • /
    • 제14권12호
    • /
    • pp.6602-6609
    • /
    • 2013
  • 돈사에서 발생하는 악취로 인한 주변지역 영향을 EPA가 권장하는 ISCST3 모델을 적용하여 악취모델링을 실시하여 복합악취 기준과 비교하고 악취 저감대책을 수립하는데 기초자료로 활용하고자 하였다. 돈사 악취의 영향을 분석하기 위하여 자돈과 성돈에 따라서 평균치와 최소, 최대치로 분류하여 악취 농도를 예측하였다. 양돈장의 혼합 악취의 예측 결과에서 인접 건물들은 허용한계를 초과하나 양돈장으로부터 185m 떨어진 거리에 있는 피해지역에서는 허용한계를 만족하였다. 허용한계에 대한 악취 배출량을 확인하기 위해 관리동에서 누출량을 측정하였으며 누출량 50%, 30%, 10% 기준으로 악취 농도를 예측한 결과는 관리동에서 1hr 기준 최대 발생량이 10.59~52.93, 19.05~31.76, 10.59 $OU/m^3/s/m^2$로 수인한도 10.00 $OU/m^3/s/m^2$를 다소 초과하는 것으로 예측되었으나, 누출량을 10% 미만으로 관리시 수인한도를 만족할 수 있을 것으로 판단된다.

ISCST3-PRIME모델을 이용한 건물 세류현상 해석 (The Analysis of Building Downwash Effect using ISCST3-PRIME Model)

  • 조진식;구윤서;최상민;정은동
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2002년도 추계학술대회 논문집
    • /
    • pp.395-396
    • /
    • 2002
  • 국내 지형이 복잡하고, 대단위 배출시설들이 대도시 주변에 많이 위치하고 있기 때문에 굴뚝에서 배출된 오염물질이 주변에 미치는 영향을 정확히 파악하기 위해서는 굴뚝 주변의 건물 세류현상에 대해 세밀한 해석이 요구된다. 현재 국내 환경영향평가에서 건물세류현상을 평가하기 위해서 주로 미국 환경보호청에서 제공하고 있는 ISC3모델을 사용하고 있다(US EPA, 1995). 그러나 이 모델에서는 건물과 굴뚝간의 거리에 따른 연기확산의 차이가 발생하는 것을 고려할 수 없고, 또한 건물 주위에 형성되는 와류(wake)에 의해서 배출된 연기의 중심축이 기울어지는 것 등을 고려 할 수 없다. (중략)

  • PDF

ISCST3를 이용한 악취 확산 모델링에 대한 연구 (A Study of Odor Dispersion Modeling using ISCST3)

  • 김용규;구윤서;김성태;송선호
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2002년도 추계학술대회 논문집
    • /
    • pp.397-398
    • /
    • 2002
  • 대기분야에서는 악취관련 민원이 거의 대부분을 차지하고 있고, 최근 환경부에서도 이에 적극적으로 대처하기 위해서 악취방지법을 제정한 바가 있다. 현재 국내에서 많은 연구자들이 노력한 결과로 악취물질 측정 분석 방법이 정립되었고, 대규모 공단지역에서 악취배출원 및 배출량에 대한 자료가 축적된 상황이다. 그러나 아직까지도 국내에서는 배출된 악취물질이 주변에 미치는 영향을 정량적으로 해석하기 위한 모델링 기법에 대해서는 심도 있게 연구된 바가 없는 실정이다. (중략)

  • PDF