• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.88-90
• /
• 1990

In this study, PN junction solar cell and P$\^$+/-N-N$\^$+/ BSF solar cell, using N-type(111), 10$\^$16/[atoms/cm$\^$-3/] wafer, were fabricated applying that ion implant method whose dose are 1E14, 1E15, 3E15 and its acceleration energy is 50Key, 100Key respectively. The impurity concentration of two types of front-side are 10$\^$18/[atoms/cm$\^$-3/] and back-side concentration for BSF solar cell is 10$\^$17/[atoms/cm$\^$-3/]. As a result of comparison for 2 typical types of cells out of various fabricated samples, open circuit voltage (Voc), short circuit current(Isc) of BSF solar cell are larger than those of PN solar cell by 48[%], 14[%]. Considering that the efficiency of BSF cell is 2.5[%] as well as PN solar cell's is 7.5[%], 10.0[%] of efficiency improvement effect can be obtained from BSF solar cell. Futhermore, in consequence of front-side impurity concentration change from 10$\^$17/[atoms/cm$\^$-3] to 10$\^$20/[atoms/cm$\^$-3/] alternately, the most ideal result can be expected when it is 10$\^$18/[atoms/cm$\^$-3/].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.335-335
• /
• 2007

염료감응형 태양전지(Dye-sensitized solar cells)용 페이스트의 제조시 바인더(binder)인 폴리에틸렌 글리콜(Polyethylene glycol; 이하 PEG)의 함량변화가 염료감응형 태양전지의 에너지 변환효율에 미치는 영향을 조사하고자 하였다. PEG의 함량변화는 0-30wt%까지 변화시켰으며 그들의 표면이나 단면의 형상을 FE-SEM, AFM으로 관찰 하였고, PEG 함량변화에 따른 열적특성은 TG/DTA 결과로 조사하였다. PEG의 양이 0%에서 20wt%까지 첨가되었을 때 단락전류밀도(Isc: Short current density)는 증가되어 나타났고 PEG가 30wt%가 첨가되었을 때는 오히려 감소하는 것을 확인할 수 있으며 이것은 $TiO_2$ 입자간의 응집현상이 과도하게 진행되어 전자의 흐름을 방해한 것으로 판단된다. PEG의 함량이 20wt% 첨가되었을 때 개방전압 (Voc: Open circuit voltage)이 0.73V, 단락전류밀도는 $22.6mA/cm^2$, 필펙터는 0.55, 에너지변환효율은 9.1%로 최적의 바인더 함량을 나타내었다. 염료감응형 태양전지의 광전극 제조시 PEG 바인더의 함량 변화에 따라 일자간의 응징특성이나 기공도와 같은 표면형상, 그리고 에너지변환효율을 변화시킨다는 것을 확인할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.313.2-313.2
• /
• 2013

본 연구에서는 기존에 연구된 Solar Cell 보다 구조 및 제작이 단순한 $Al/Al_2O_3/Si$(100) Solar cell을 제작하여 평가하였다. 기판으로는 p-type Si(100), 0.5~2 ${\Omega}{\cdot}cm$을 사용하여 chemical cleaning 후 ALD(Atom Layer Deposition)법으로 Al2O3 터널링 절연막을 증착하였으며, 박막의 두께를 1~10 nm로 변화시켜 MIS 커패시터의 터널링 효과를 평가하였다. MIS 커패시터의 전기적 특성평가를 위해 누설전류 밀도-전계 특성은 pA meter/DC Voltage source를 사용하였고, 커패시턴스-전압특성, D-factor 특성은 precision LCR meter를 사용하였다. $Al/Al_2O_3/Si$(100) Solar cell의 특성평가를 위해 300~1100nm 파장영역에 따른 양자 효율을 평가하기 위해 Quantum Efficiency system (QE)을 사용하였고, Stanard Test Conditions 100 $mW/cm^2$, AM1.5, $25^{\circ}C$ 조건의 Voc, Isc, Jsc, FF (Fill Factor) 및 Efficiency(%)를 평가하기 위해 Solar simulator를 이용하였다.

• International journal of advanced smart convergence
• /
• 제10권3호
• /
• pp.17-25
• /
• 2021

As a new paradigm in non-orthogonal multiple access (NOMA), correlated superposition coding (CSC) has gained an attention in the literature of NOMA, in contrast to standard independent superposition coding (ISC). In the conventional 3-user CSC scheme, it has been reported that the average allocated power can be reduced, owing to an introduced correlation between transmitted signals. Thus, this paper proposes a 3-user cross CSC scheme with purely-imaginary correlation coefficients. First, we derive the achievable data rates of the proposed 3-user cross CSC scheme, for each of the three users. Then, simulations demonstrate that for the proposed 3-user cross CSC scheme, the achievable data rates of the first and second users increase greatly and slightly, respectively, whereas the achievable data rate of the third user decreases little, compared to those of the conventional 3-user CSC scheme. In addition, we also show that the sum rate of the three users of the proposed 3-user cross CSC scheme is much larger than that of the three users of the conventional 3-user CSC scheme. As a result, the proposed 3-user cross CSC scheme could be a solution to the problem of the reduction of the average allocated total power in the conventional 3-user CSC scheme toward the fifth-generation (5G) NOMA mobile networks.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권3호
• /
• pp.17-24
• /
• 2021

Recently, a lossless non-orthogonal multiple access (NOMA) implementation without successive interference cancellation (SIC) has been proposed in the literature of NOMA. This lossless non-SIC NOMA was achieved via correlated superposition coding (CSC), in contrast to conventional independent superposition coding (ISC). However, only the achievable data rates for CSC NOMA were investigated. Thus, this paper proposes a practical CSC NOMA scheme under Rayleigh fading channel environments. First, we design the practical CSC NOMA scheme, namely quadrature correlated superposition modulation (CSM) NOMA, without channel coding, i.e., uncoded systems. In addition, we calculate the symbol error rates (SERs) for this quadrature CSM NOMA scheme. Then, simulations demonstrate that for the weak channel gain's user, the SER performance of the proposed quadrature CSM NOMA is shown to be improved greatly, compared to that of the conventional quadrature amplitude modulation (QAM) NOMA, whereas for the strong channel gain's user, the SER performance of the proposed quadrature CSM NOMA degrades a little, compared to that of the conventional QAM NOMA. As a result, the proposed quadrature CSM NOMA scheme could be considered as a practical NOMA scheme for CSC NOMA schemes toward the fifth-generation (5G) and next generation communications.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.73-84
• /
• 2003

Skin aging process on pre-menopausal women is a problem that needs to be prevented as early as possible. The decrease of oestrogen level which is one of the intrinsic factors of the skin aging process will affect the skin biological process, due to oestrogen receptors on the skin. A number of researches conducted on pre-menopausal women with the allocation of oestrogen hormone resulted in delaying the skin aging process. The administration of soy isoflavon, a phytoestrogen found in daily food, on pre-menopausal women is hoped to be able to prevent skin aging process, even clinically or molecular biologically. This research aims to explain the benefit of administering of soy isoflavon on skin aging process. The design of the research is randomised controlled trial (RCT). As many as 60 pre-menopausal women were collected with simple random sampling method. Soy isoflavon is an independent variable, while skin aging process is a dependent variable assessed from the hydration, sebum level, average roughness, depth of wrinkles, skin clarity, length of the telomere. Analysis was conducted using t and MANDVA tests and.the result showed a significance (F = 10,439; p = 0,001) over the allocation of soy isoflavon to the whole variable dependent, including the telomere length and the skin hydration, meant that allocation of soy isoflavon could delay skin aging process.

• Asia pacific journal of information systems
• /
• 제31권2호
• /
• pp.236-256
• /
• 2021

Online financial technology products are an important consumer finance innovation. While a large body of previous research has focused on initial adoption and consumer willingness to use these products, little research explores the continued use of these products beyond the initial adoption phase. In particular, special attention should be paid to how users' trust and perceptions of privacy and security affect continued use behavior. This paper integrates the expectation confirmation model of information system continuance (ECM-ISC), the information system success model (ISSM) and the security and trust literatures to investigate continued use of online financial technology. To test the research model, we collected 398 valid questionnaires from Ant Credit Pay users. The research results show that system and service quality positively impact users' expectation confirmation, while information quality has no significant impact. Expectation confirmation and perceived usefulness positively affect user satisfaction. Moreover, the user's perception of privacy and security plays a vital role in user satisfaction. Satisfaction and perceived trust jointly promote users' continuance behaviors. Findings of this study indicates the importance of the information system success factors and security factors due to their influence on the continued use of Fintech products. This conclusion has implications for enterprises in improving the product qualities and enhancing the degree of security to meet user needs.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.88.2-88.2
• /
• 2010

Dye-sensitized solar cells (DSSCs) have attracted considerable attention on account of their high solar energy-to-conversion efficiencies and low cost processes compared to conventional p-n junction solar cells. The mechanism of DSSC is based on the injection of electrons from the photo excited dyes into the conduction band of the semiconductor electrode. The oxidized dye is reduced by the hole injection into either the hole conductor or the electrolyte. Thus, the light harvesting effect of dye plays an important role in capturing the photons and generating the electron/hole pair, as well as transferring them to the interface of the semiconductor and the electrolyte, respectively. We used the organic fluorescence materials which can absorb short wavelength light and emit longer wavelength region where dye sensitize effectively. In this work, the DSSCs were fabricated with fluorescence materials added $TiO_2$ photo-electrode which were sensitized with metal-free organic dyes. The photovoltaic performances of fluorescence aided DSSCs were compared, and the recombination dark current curves and the incident photon-to-current (IPCE) efficiencies were measured in order to characterize the effects of the additional light harvesting effect in DSSC. Electro-optical measurements were also used to optimize the fluorescence material contents on TiO2 photo-electrode surface for higher conversion efficiency (${\eta}$), fill factor (FF), open-circuit voltage (VOC) and short-circuit current (ISC). The enhanced light harvesting effect by the judicious choice/design of the fluorescence materials and sensitizing dyes permits the enhancement of photovoltaic performance of DSSC.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.53.1-53.1
• /
• 2010

결정질 실리콘 태양전지의 효율을 향상시키기 위하여 수광면에 서로 다른 도핑농도를 가지는 고농도 도핑영역과 저농도 도핑영역으로 이루어진 emitter를 형성하는 것이 요구되며 이를 selective emitter라 칭한다. Selective emitter를 형성하면 고농도 도핑영역에서 금속전극과 저항 접촉이 잘 형성되기 때문에 직렬 저항이 최소화되고 저농도 도핑영역에서는 전하 재결합의 감소로 인하여 태양전지의 변환효율이 상승하는 이점이 있다. Selective emitter의 형성방법은 이미 다양한 방법이 제안되고 있으나, 본 연구에서는 기존에 제시된 방법과는 다르게 열산화 시 dopant redistribution에 의한 Boron depletion 현상을 이용하여 selective emitter를 형성하는 방법을 제안하였고, 이를 Simulation을 통하여 검증하였다. 초기 emitter 확산 후 junction depth는 0.478um, 면저항은 $104.2{\Omega}/sq.$ 이었으며, nitride masking layer 두께는 0.3um로 설정하였다. $1100^{\circ}C$에서 30분간 습식산화 공정을 거친 후 nitride mask가 있는 부분의 junction depth는 1.48um, 면저항은 $89.1{\Omega}/sq$의 값을 보였고, 산화막이 형성된 부분의 junction depth는 1.16um, 면저항은 $261.8{\Omega}/sq$의 값을 보였다. 위 조건의 구조를 가진 태양전지의 변환 효율은 19.28%의 값을 나타내었고 Voc, Jsc 및 fill factor는 각각 645.08mV, $36.26mA/cm^2$, 82.42%의 값을 보였다. 한편 일반적인 구조로 설정한 태양전지의 변환 효율, Voc, Isc 및 fill factor는 각각 18.73%, 644.86mV, $36.26mA/cm^2$, 80.09%의 값을 보였다.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.346-357
• /
• 2017

The Modular Multilevel Converter (MMC) is particularly attractive for medium and high power applications such as High-Voltage Direct Current (HVDC) systems. In order to reach a high voltage, the number of cascaded submodules (SMs) is generally very large. Thus, in the applications with hundreds or even thousands of SMs such as MMC-HVDCs, the sorting algorithm of the conventional voltage balancing strategy is extremely slow. This complicates the controller design and increases the hardware cost tremendously. This paper presents a Two-Way Merge Sort (TWMS) strategy based on the prediction of the capacitor voltages under ideal conditions. It also proposes an innovative Insertion Sort Correction for the TWMS (ISC-TWMS) to solve issues in practical engineering under non-ideal conditions. The proposed sorting methods are combined with the features of the MMC-HVDC control strategy, which significantly accelerates the sorting process and reduces the implementation efforts. In comparison with the commonly used quicksort algorithm, it saves at least two-thirds of the sorting execution time in one arm with 100 SMs, and saves more with a higher number of SMs. A 501-level MMC-HVDC simulation model in PSCAD/EMTDC has been built to verify the validity of the proposed strategies. The fast speed and high efficiency of the algorithms are demonstrated by experiments with a DSP controller (TMS320F28335).