• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.281-284
• /
• 2007

Recently, we have developed p-i-n a-Si:H single junction thin film solar cells with RF (13.56MHz) plasma enhanced chemical vapor deposition (PECVD) system, and also successfully fabricated the mini modules ($>300cm^2$), using the laser patterning technique to form an integrated series connection. The efficiency of a mini module was 7.4% ($Area=305cm^2$, Isc=0.25A, Voc=14.74V, FF=62%). To fabricate large area modules, it is important to optimise the integrated series connection, without damaging the cell. We have newly installed the laser patterning equipment that consists of two different lasers, $SHG-YVO_4$ (${\lambda}=0.532{\mu}m$) and YAG (${\lambda}=1.064{\mu}m$). The mini-modules are formed through several scribed lines such as pattern-l (front TCO), pattern-2 (PV layers) and pattern-3 (BR/back contact). However, in the case of pattern-3, a high-energy part of laser shot damaged the textured surface of the front TCO, so that the resistance between the each cells decreases due to an incomplete isolation. In this study, the re-deposition of SnOx from the front TCO, Zn (BR layer) and Al (back contact) on the sidewalls of pattern-3 scribed lines was observed. Moreover, re-crystallization of a-Si:H layers due to thermal damage by laser patterning was evaluated. These cause an increase of a leakage current, result in a low efficiency of module. To optimize a-Si:H single junction thin film modules, a laser beam profile was changed, and its effect on isolation of scribed lines is discussed in this paper.

• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.38-42
• /
• 2018

Continuous efforts are being made to improve the efficiency of Si solar cells, which is the prevailing technology at this time. As opposed to the standard front-lit solar cell design, the back-lit design suffers no shading loss because all the metal electrodes are placed on one side close to the pn junction, which is referred to as the front side, and the incoming light enters the denuded back side. In this study, a systematic comparison between the two designs was conducted by means of computer simulation. Medici, a two-dimensional semiconductor device simulation tool, was utilized for this purpose. The $0.6{\mu}m$ wavelength, the peak value for the AM-1.5 illumination, was chosen for the incident photons, and the minority-carrier recombination lifetime (${\tau}$), a key indicator of the Si substrate quality, was the main variable in the simulation on a p-type $150{\mu}m$ thick Si substrate. Qualitatively, minority-carrier recombination affected the short circuit current (Isc) but not the opencircuit voltage (Voc). The latter was most affected by series resistance associated with the electrode locations. Quantitatively, when ${\tau}{\leq}500{\mu}s$, the simulation yielded the solar cell power outputs of $20.7mW{\cdot}cm^{-2}$ and $18.6mW{\cdot}cm^{-2}$, respectively, for the front-lit and back-lit cells, a reasonable 10 % difference. However, when ${\tau}$ < $500{\mu}s$, the difference was 20 % or more, making the back-lit design less than competitive. We concluded that the back-lit design, despite its inherent benefits, is not suitable for a broad range of Si solar cells but may only be applicable in the high-end cells where float-zone (FZ) or magnetic Czochralski (MCZ) Si crystals of the highest quality are used as the substrate.

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.273-273
• /
• 2014

Quantum-dot sensitized solar cells (QDSCs) are an emerging class of solar cells owing to their easy fabrication, low cost and material diversity. Despite of the fact that the maximum conversion efficiency of QDSCs is still far less than that of Dye-Sensitized Solar Cells (>12 %), their unique characteristics like Multiple Exciton Generation (MEG), energy band tune-ability and tendency to incorporate multiple co-sensitizers concurrently has made QDs a suitable alternative to expensive dyes for solar cell application. Lead Sulfide (PbS) Quantum dot sensitized solar cells are theoretically proficient enough to have a photo-current density ($J_{sc}$) of $36mA/cm^2$, but practically there are very few reports on photocurrent enhancement in PbS QDSCs. Recently, $Hg^{2+}$ incorporated PbS quantumdots and Cadmium Sulfide (CdS) co-sensitized PbS solarcells are reported to show an improvement in photo-current density ($J_{sc}$). In this study, we explored the efficacy of $In_2S_3$ as an interfacial layer deposited through SILAR process for PbS QDSCs. $In_2S_3$ was chosen as the interfacial layer in order to avoid the usage of hazardous CdS or Mercury (Hg). Herein, the deposition of $In_2S_3$ interfacial layer on $TiO_2$ prior to PbS QDs exhibited a direct enhancement in the photo-current (Isc). Improved photo-absorption as well as interfacial recombination barrier caused by $In_2S_3$ deposition increased the photo-current density ($J_{sc}$) from $13mA/cm^2$ to $15.5mA/cm^2$ for single cycle of $In_2S_3$ deposition. Increase in the number of cycles of $In_2S_3$ deposition was found to deteriorate the photocurrent, however it increased $V_{oc}$ of the device which reached to an optimum value of 2.25% Photo-conversion Efficiency (PCE) for 2 cycles of $In_2S_3$ deposition. Effect of Heat Treatment, Normalized Current Stability, Open Circuit Voltage Decay and Dark IV Characteristics were further measured to reveal the characteristics of device.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.16-21
• /
• 2010

It is well-known that Boron-doped Cz Si solar cells suffer light-induced degradation due to boron-oxygen defect which is responsible of a reduction in lifetime and hence efficiency. In this paper, we assume that PV solar cell has been connected with variable load to account the real operating condition and it shows different light-induced degradation of Si solar cell. To evaluate the effect of light-induced degradation for solar cell with various load, Single crystalline solar cells are connected with open and short circuits during light exposure. Isc-Voc curve evaluate light induced degradation of solar cells and the reason is explained as a change for serial resistance. From the results, Electrical characteristics of solar cells show better performance under short circuit conditions, after light exposure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1004-1011
• /
• 2006

In this study, we have performed a systematic case study on troubles and diagnoses of passenger car's engine based on OBD. We have acquired 1,242 data in order to analysis accurate troubles' causes and apposite diagnoses. 128 data of them are got using OBD apparatus, and the rest of them are collected on related website. As results, distribution on trouble cases shows bad idling(32%), poor acceleration(21%), stop in running(19%), faulty start(11%), inferior fuel economy(9%), and insufficient power(8%) in order of magnitude. And in the systematic cases, it is not difficult to detect troubles in a single part. But we know that special apparatus such as multichannel scanner is needed in complicated troubles. Furthermore we think that the survey is continued in various ways for more systematic case study on troubles and diagnoses.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.6
• /
• pp.626-634
• /
• 2019

Objective : Nerve growth factor (NGF) is a member of the neurotrophic factor family and plays a vital role in the physiological processes of organisms, especially in the nervous system. Many recent studies have reported that NGF is also involved in the regulation of tumourigenesis by either promoting or suppressing tumor growth, which depends on the location and type of tumor. However, little is known regarding the effect of NGF on interspinal schwannoma (IS). In the present study, we aimed to explored whether mouse nerve growth factor (mNGF), which is widely used in the clinic, can influence the growth of interspinal schwannoma cells (ISCs) isolated from IS in vitro. Methods : ISCs were isolated, cultured and identified by S-100 with immunofluorescence analysis. S-100-positive cells were divided into five groups, and separately cultured with various concentrations of mNGF (0 [phosphate buffered saline, PBS], 40, 80, 160, and 320 ng/mL) for 24 hours. Western blot and quantantive real time polymerase chain reaction (PCR) were applied to detect tyrosine kinase A (TrkA) receptor and p75 neurotrophin receptor ($p75^{NTR}$) in each group. Crystal violet staining was selected to assess the effect of mNGF (160 ng/mL) on ISCs growth. Results : ISCs growth was enhanced by mNGF in a dose-dependent manner. The result of crystal violet staining revealed that it was significantly strengthened the cells growth kinetics when cultured with 160 ng/mL mNGF compared to PBS group. Western blot and quantantive real time PCR discovered that TrkA receptor and mRNA expression were both up-regualated under the condition of mNGF, expecially in 160 ng/mL, while the exoression of $p75^{NTR}$ demonstrated no difference among groups. Conclusion : From these data, we conclude that exogenous mNGF can facilitate ISC growth by activating both TrkA receptor and $p75^{NTR}$. In addition, patients who are suffering from IS should not be administered mNGF in the clinic.

• Journal of the Korean Chemical Society
• /
• v.63 no.3
• /
• pp.151-159
• /
• 2019

The TADF properties for carbazol-dicyanobenzene, carbazol-diphenyl sulfone, carbazol-benzonitrile derivatives as OLED candidate materials are theoretically investigated using density functional theory (DFT) with $6-31G^{**}$, cc-pVDZ, and cc-pVTZ basis sets. The optimized geometries, harmonic vibrational frequencies, and HOMO-LUMO energy separations are predicted at the B3LYP/$6-31G^{**}$ level of theory. The harmonic vibrational frequencies of the molecules considered in this study show all real numbers implying true minima. The time dependent density functional theory (TD-DFT) calculations have been also applied to investigate the absorption and emission wavelength (${\lambda}_{max}$), energy differences (${\Delta}E_{ST}$) between excited singlet ($S_1$) and triplet ($T_1$) states of candidate materials.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.90-102
• /
• 2024

Haploid/double haploid plants developed from isolated microspores can significantly accelerate plant breeding. Haploid plants can naturally double their chromosomes to create a pure homozygous line of diploid plants. We present a method for producing embryos from isolated microspores of hot peppers (Capsicum annuumL.). We analyzed the polyploidization levels of the regenerated plants. The donor plants produced the optimal stage of microspores following short-term growth under low-intensity light, which resulted in high rates of embryogenesis and cotyledonary embryogenesis. To find an efficient culture method, liquid, doubled-layer, and 2-step cultures were tested. Liquid culture yielded the highest number of embryos, whereas the highest efficiency for cotyledonary embryogenesis was afforded by the doubled-layer culture. When normal cotyledonary embryos were transplanted onto a regeneration medium, they developed into complete plants. From these, 208 plants were tested via flow cytometric analysis, and 35.6% and 72.7% of the chromosomes from the Milyang-jare and LV2319 genotypes, respectively, were found to be spontaneous double haploids. These results are the same as those obtained on analyzing horticultural characteristics, including the size of leaves and the size and shape of fruits. The present study provides information on the practical application of isolated microspore culture of hot peppers, factors that affect embryogenesis, and methods for polyploidy testing.

• The Korean Journal of Community Living Science
• /
• v.15 no.4
• /
• pp.89-96
• /
• 2004

This study is to investigate the effect of dietary mixed protein and L-carnitine supplementation on lipid metabolism in the rats fed high fat diet. Six experimental groups were organized and each group had eight Sprague-Dawley male white rats with the initial weight of around 180g. The six experimental groups were CO(supplemented with casein), CC(supplementedwith casein and cartinine), ISO(supplemented with isolated soy protein), ISC(supplemented with isolated soy protein and cartinine), CIM(supplemented with casein and isolated soy protein), and CIC(supplemented with casein, isolated soy protein and cartinine). Each group was supplemented with the experimental diet for four weeks, and carnitine contained 3efo of the diet. The results were as follows; 1. There was no significant difference in food intake among the experimental groups. The weight increased more significantly in the group supplemented with the mixed protein than in the group supplemented with casein(p<0.05).2. There was weight reduction effect by the supplementation of carnitine(p<0.05), however no weight reduction effect by the supplementation of carnitine was observed in the group supplemented with the mixed protein and isolated soy protein. 3. Food efficiency was lower in the group supplemented with the mixed protein than in the group supplemented with casein (p<0.05), however it was similar in the group supplemented with isolated soy protein.4. Serum total lipid and se겨m total cholesterol were lower in the group supplemented with mixed protein than in the group supplemented with casein(p<0.05). 5. There was no significant difference of serum triglyceride, HDL-cholesterol, and LDL-cholesterol among the experimental groups. 6. Liver triglyceride was the highest in the group supplemented with mixed protein (p<0.05), and there was no significant difference of liver total lipid and total cholesterol among the experimental groups. 7. In the groups supplemented with mixed protein, the level of liver TBARS showed the lowest when casein was supplemented(p<0.05), and there was no significant difference of GSH-Px activities among the experimental groups. In summary, when mixed protein was supplemented to the rats weight gain and food efficiency were similar with those in the group supplemented with isolated soy protein, however they were lower than those in the group supplemented with casein. The effect of carnitine on weight was not observed in the group supplemented with mixed protein and isolated soy protein, however it was observed in the group supplemented with casein. Serum Total lipid and total cholesterol were lower than those in the group supplemented with casein. Liver total triglyceride was high in the group supplemented with mixed protein, and the antioxidant effect was observed in the group supplemented with mixed protein.