• Journal of Auto-vehicle Safety Association
• /
• v.11 no.1
• /
• pp.48-54
• /
• 2019

Optimal engine control is needed to cope with the global environmental regulations that are globally enforced. For optimum engine control, the electronic throttle control system (ETCS) is a prerequisite. Automotive makers are having an effect on reducing emissions and improving fuel economy by applying ETCS which is designed to secure stability. The ETCS controls the output of the throttle valve by passing the output value of the accelerator position sensor (APS) to the engine control unit (ECU). In this study, the authors investigated the safety standards of domestic and overseas accelerator control system and tried to understand how the air flow control affects the engine output by replacing the throttle. The authors suggest an improvement proposal of safety standard based on the result of driving evaluation by various modes.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.133-136
• /
• 2024

전 산업에서 초고속 저지연 데이터 서비스 수요가 증가하면서 저지연 트래픽 (low latency traffic, LLT) 처리 중요성이 커지고 있다. 기존 연구들은 LLT 에 우선순위를 부여하여 먼저 처리하는 프리 엠프션 기법을 제안했으나 제어 오버헤드가 증가하거나 non-LLT 트래픽 성능을 열화하는 문제를 해결할 수 없었다. 본 논문에서는 이러한 문제를 해결하기 위해 종래에 사용하지 않았던 짧은 인터프레임 스페이스 (Short Interframe Space, SIFS)를 LLT 에 활용하는 새로운 전송 기법을 제안한다. 본 논문에서는 수치 분석을 통해 제안하는 인터프레임 스페이스 통신 (Interframe Space Communication, ISC)이 종래의 전송 방법 대비 스루풋을 평균 50% 개선하고 지연도를 98% 개선할 수 있음을 보였다.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.151-160
• /
• 2018

Waxes currently used as a coating material to preserve surfaces of outdoor iron sculptures tend to face lower coating strength and efflorescence due to the aging from air pollution and acid rains. Consequently, they are subjected to repeated corrosions shortly after the treatment. And the sculptures face the problem losing their original nature because of the changes of colors and lusters, so this convergence study aims at developing wax with better performance than the existing materials. For this reason, the study identified the effects of physical property using the environmental experiments such as the tests of salt spray and gas corrosion as well as the analysis of luster level and thermo-gravimetry. As this study result, the developed ISC wax showed the excellent blocking effect from salt water and coating durability more than five times compared with the existing waxes, better acid resistance by two-four times, sun block effect by 2-10 times, improved luster variance by 3-16 times, improved thermo-stability and durability by 0.5-5 times, and therefore demonstrating far better coating effect than the existing waxes. In the light of these findings, this study contributes for this new development which can replace the existing waxes used so far in order to preserve the outdoor iron sculptures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3740-3747
• /
• 2009

To protect the citizens' health of Gyeongju and to secure basic data for the assessment of health and environmental risk, distribution characteristics of meteorological elements were investigated and numerical simulation of wind field using RAMS model was carried out. In addition, measurement and analysis of air pollutants, forecasting the behavior air pollutants using ISC-AEROMOD view, and health and environmental risk-influenced zones were defined through managing air polluting materials to prevent health damage and property damage. According to the survey results of air pollution in Gyeongju and surroundings, average annual concentration of air pollutants in Gyeongju was slightly lower than that in Pohang and Ulsan areas, but concentration of particulate matters and nitrogen dioxide at Gyeongju Station Square and Yonggang Crossing were sometimes higher than that in Pohang and Ulsan areas. Results of the modeling of moving and diffusion of air pollutants that affect citizens' health showed that parts of the 1st through 4th industrial complexes together with POSCO were included in particulate matters and sulfur dioxide influenced areas in Pohang Steel Complex area, and that Haedo-dong, Sangdae-dong, Jecheol-dong and Jangheung-dong in Pohangnam-gu represented locally worsened air quality due to a quantity of air pollutant emission from dense steel industries and large scale industrial facilities.

• Childhood Kidney Diseases
• /
• v.21 no.2
• /
• pp.142-146
• /
• 2017

Purpose: To evaluate changes in quality of life (QoL) in patients with neurogenic bladder treated with clean intermittent catheterization (CIC), who changed from a multiple use catheter (MUC) to single use catheter (SUC). Methods: The Modified Intermittent Self-Catheterization Questionnaire (mISC-Q) was used to determine potential changes in patients' QoL as a result of switching from MUC to SUC. The mISC-Q consists of questions within four categories: ease of use, convenience, discreetness, and symptomatic benefit. Answers were graded as Strongly agree (+2), Agree (+1), Not sure (0), Disagree (-1), and Strongly disagree (-2). Overall patient QoL, as well as by sex, disease (presence of augmentation cystoplasty), and catheterization route (via urethra or urinary diversion), were analyzed. Results: Thirty-eight patients (21M:17F; mean age: $21.7{\pm}5.3y$) submitted questionnaires. For ease of use, SUC was significantly better than MUC (score: 0.364, P=0.002) in all patients. Patients with catheterization via the urethra showed significant favor for SUC in ease of use (score: 0.512, P<0.001) and convenience (score: 0.714, P=0.011), but patients with catheterization via the abdominal stoma of urinary diversion gave negative scores in all categories, though no categories were significant. Conclusion: This study suggested that changing from MUC to SUC may lead to improvements in QoL, especially regarding ease of use. This benefit was clearly found in patients with catheterization via urethra rather than abdominal stoma of urinary diversion.

• Solar Energy
• /
• v.12 no.2
• /
• pp.62-78
• /
• 1992

The solar cells of $ITO_{(n)}/Si_{(p)}$, which are ITO thin films deposited and heated on Si wafer 190[$^{\circ}C$], were fabricated by two source vaccum deposition method, and their electrical properties were investigated. Its maximum output is obtained when the com- position of the thin film consist of indium oxide 91[mole %] and thin oxide 9[mole %]. The cell characteristics can be improved by annealing but are deteriorated at temperature above 600[$^{\circ}C$] for longer than 15[min]. Also, we investigated the spectral response with short circuit current of the cells and found that the increasing of the annealing caused the peak shifted to the long wavelength region. And by experiment of the X-ray diffraction, it is shown to grow the grains of the thin film with increasment of annealing temperature. The test results from the $ITO_{(n)}/Si_{(p)}$ solar cell are as follows. short circuit current : Isc= 31 $[mW/cm^2]$ open circuit voltage : Voc= 460[mV] fill factor : FF=0.71 conversion efficiency : ${\eta}$=11[%]. under the solar energy illumination of $100[mW/cm^2]$.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.2
• /
• pp.300-305
• /
• 2011

The present study was investigated the neuroprotective effects of acupuncture at ST36 on learning and memory deficits after transient cerebral ischemia in a gerbil model. The animals were randomly divided into three groups (n=7 in each group): the sham operation group (SHAM), ischemia-induced and ST36 acupuncture group (ISC + ST36), and the ischemia-induced and Tail-acupuncture group (ISC + TAIL). For the acupuncture stimulation, stainless steel needles, 0.3 mm in diameter, were inserted bilaterally into the ST36 locus or the tail and stimulated for 1 min/day for 14 days. Using the Morris water maze test, the animals were tested on spatial learning and memory. In addition, the effects of acupuncture on memory storage and the choline acetyltransferase (ChAT) activity, in the hippocampal CA1 area, were investigated by ChAT immunohistochemistry. Transient cerebral ischemia produced impaired performance on the MWM test (DAY 5: p<0.01 and retention test: p<0.05) and severely decreased ChAT immunoreactivity in the CA1 hippocampal area compared to the SHAM group (p<0.05). However, improved learning and memory were observed (DAY 5: p<0.05 and retention test: p<0.01) as well as a significantly reduced loss of ChAT immunoactivity in the hippocampal CA1 region (p<0.001) after acupuncture stimulation at ST36 were observed. These results show that acupuncture at ST36 ameliorated the learning and memory deficits at least in part through the cholinergic system. The findings of this study provide potential data that acupuncture is useful for the treatment of some of the behavioral impairs of transient cerebral ischemia.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.10
• /
• pp.35-44
• /
• 2019

Purpose - This study focuses on the continuance intention of O2O fresh agricultural products e-commerce. By literature review, this paper looks through the classical theories which are often applied to study use behavior and continuance intention on the electronic commerce area. Ultimately based on the expectancy theory, Technology acceptance model, success model as well as trust model, a model of the continuance intention of fresh products O2O electronic commerce application is established. Research design, data, and methodology - Among users Chinese consumers have been chosen who have use experience as the research objects. From October 2, 2018 to November 2, 2018, 685 questionnaires in total were collected by the online release and collection. Expect for the negative questionnaires, the remaining 650 pieces of data are statistically analyzed. The collected data were firstly be analyzed by SPSS Ver. 25 on its frequency, reliability and exploratory factors. Then AMOS Ver. 25 is applied to the Confirmatory Factor Analysis, Discriminant Validity and hypothesis testing of the Structural Equation Modeling. Finally, the following research conclusions could be obtained from the hypothesis testing. Results - Firstly, in the extended IS model, quality factor for hypothesis testing, service quality, information quality and delivery quality have obviously present positive influences on satisfaction respectively. Secondly, in the hypothesis testing part of ECM-ISC model and UTAUT model, all hypotheses have presented accepted results. Especially from expectation confirmation to usefulness perception, the influence factor achieves 12.603, In the hypothesis of continuance intention, the influence factor of social influence on continuance intention is 7.748 and also it is the most remarkable one. Conclusions - The results show that the service quality of O2O fresh agricultural products e-commerce has the greatest impact on satisfaction, while the perceived usefulness of consumers has the most significant impact on O2O fresh agricultural products for sustainable use intention. This thesis makes up for the blank of O2O fresh food e-commerce for sustainable use intentions, and provides a theoretical basis for consumers' sustainable use behavior, and practical enlightenment for the sustainable development of O2O fresh agricultural products e-commerce.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.438-438
• /
• 2012

결정질 실리콘 태양전지 공정 중 텍스쳐 공정은 표면에서 반사되는 반사광을 줄여 단락전류(Isc)를 증가시킨다. 표면 텍스쳐 형성 방식으로는 일반적으로 습식 식각(Wet etching) 공정과 건식 식각(Reactive ion etching:RIE) 공정이 있다. 습식 식각 공정은 식각 용액을 사용하는 공정이며 건식 식각 공정은 플라즈마를 통하여 식각하는 공정으로 습식 식각 공정의 경우 식각 용액에 의한 공정상 위험도가 높으며, 용액의 폐기물에 의한 환경오염 문제가 크다. 건식 식각공정의 경우 습식 식각과 달리 공정상 위험도가 낮으며 불규칙적인 결정방향에 영향 받지 않는 비등방성 식각이 가능하여 다결정 실리콘 태양전지의 경우 습식 식각 공정보다 반사광이 적어 단락전류가 증가하게 된다. 그리고 태양전지를 Photovoltaic module로 만들게 되면 태양전지의 효율이 떨어지는데 이것을 Cell to module loss (CTM loss)라 부르며 이는 태양전지의 발전량을 줄이는 큰 원인이 된다. CTM loss의 경우 습식 식각 공정보다 건식 식각 공정에서 더 크게 나타나며 건식 식각 공정한 PV module의 경우 CTM loss로 인해 습식 식각 공정을 통한PV module와 비슷한 효율을 내게 된다. 본 연구에서는 식각 공정의 방식에 따라 나타나는CTM loss 중 광 손실 원인을 외부양자효율(External Quantum Efficiency)과 투과율(Transmittance), 반사율(Reflectance) 등 광 특성 통하여 분석한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.69.2-69.2
• /
• 2010

Recently, bulk hetero-junction cells have been extensively studied by many researchers. Most of these cells were fabricated by spin coater. However, the spin coating process is not favorable to the large-scaled industry because it is not compatible with roll-to-roll process. One of the alternative methods is Doctor blading. In this study, we fabricated large OPV cells having total area of $100cm^2$. The buffer layer was Poly-(3,4-ethylenedioxythiophene) : poly-(styrenesulfonate) aqueous dispersion (PEDOT:PSS) and the active material is poly (3-hexythiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) blend in the solvent of Chlorobenzene. All of the organic layers were coated by dragging the blade with a speed of 5~20 mm/s on the stage with a temperature of $50^{\circ}C$. As-bladed PEDOT:PSS layer was baked at $120^{\circ}C$ for 10 minutes to eliminate the water. The cell structure is patterned ITO substrate/PEDOT:PSS/P3HT:PCBM/LiF/Al. The topmost electrode, LiF/Al, was deposited by thermal evaporation. After depositing electrode, and the cell was annealed at $150^{\circ}C$ for 30 minutes. The measured ISC, VOC, fill factor, and PCE were 2.95 A, 5.86 V, 0.32, and 0.78%, respectively. PCE was quite low but the large active area could be obtained successfully.