• 유기물자원화
• /
• 제26권3호
• /
• pp.23-31
• /
• 2018

유기농 오이의 안정생산을 위한 양분관리 방법으로 가축분 퇴비와 어분액비 시용이 오이 생육과 토양환경에 미치는 영향을 검토하기 위하여 본 연구를 수행하였다. 시험은 가축분 퇴비 100% (LC100), 가축분 퇴비 50% + 어분액비 50% (LC50 + LF50), 가축분 퇴비 50% (LC50), 화학비료 (NPK), 그리고 무비 (NF) 등 5처리로 하여 처리구별 토양 화학성, 토양미생물 군집 변화, 그리고 오이 생육 및 수량을 조사하였다. 그 결과, 토양화학성의 경우에는LC50 + LF50 처리는 LC100 처리와는 EC 함량을 제외하고는 통계적인 유의차가 없었으며 화학비료 처리와는 pH를 제외하고 통계적인 유의차를 나타냈다. 토양 미생물 군집의 경우에는 미생물 밀도는 처리에 따른 통계적 유의차가 없었으며 Microbial biomass C 함량은 NF, NPK 처리에 비해 가축분 퇴비, 액비와 같은 유기물 시용구에서 높게 나타났다. 각 처리에 의한 오이 생육을 비교한 결과, 오이 초장과 생체중은 LC100, LC50 + LF50, 그리고 NPK 처리간에는 통계적인 유의차가 없었으나 NF와 LC50 처리와는 유의적인 차이를 나타냈다. 오이 수량은 NPK 처리가 7,397 kg/10a으로 가장 많았지만 LC50 + LF50, 그리고 LC100 처리와는 통계적인 유의차가 없었다. 이러한 결과로부터 유기농 오이 재배에서 가축분 퇴비와 어분액비 시용으로 양분관리가 가능할 것으로 판단되었다.

• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.90-95
• /
• 2006

T-50과 같이 단발 엔진을 장착한 항공기의 경우, 공중에서 엔진의 재시동 능력은 매우 중요한데, 본 논문에서는 T-50 엔진의 공중재시동 능력을 검증하기 위해 다양한 비행조건에서 수행한 Spooldown 공중재시동과 APU 보조 공중재시동(APU Assisted Airstart) 그리고 자동재점화(Auto-Relight) 공중재시동 시험 결과를 제시하였다. 자동재점화 공중재시동이 실패하기도 했으나, FADEC의 실화감지 스케줄을 수정한 후 재시동에 성공하는 등 계획된 시험은 모두 성공적으로 수행되어 T-50의 우수한 공중재시동 능력을 확인할 수 있었다.

• 전자공학회논문지
• /
• 제50권10호
• /
• pp.91-97
• /
• 2013

본 논문에서는 NTSC/PAL 아날로그 TV를 구동하기 위한 10-bit current steering D/A 변환기를 제안하였다. 제안하는 D/A 변환기는 50MS/s 의 동작속도를 가지며, 6+4 분할 구조로 설계되었다. 또한 새로운 개념의 자가보정 바이어스 기법을 적용하여 칩 내부의 종단저항을 사용하고도 공정오차를 최소화 하였다. 제안하는 D/A 변환기는 3.3V 0.11um 1-poly 6-metal CMOS 공정을 사용하여 제작되었다. 제작된 칩의 유효 면적은 $0.35mm^2$, 3.3V 전원전압 상에서 약 88mW의 전력소모를 나타내었다. 실험 결과는 변환 속도 50MS/s, 입력 주파수 1MHz에서 SFDR 63.1dB의 특성을 나타내었다.

• 한국조경학회지
• /
• 제29권1호
• /
• pp.161-167
• /
• 2001

The purpose of this study is to find out the difference of Zoysia matrella's evaporation in between 100 percent soil and mixed soil with 50 percent of perlite to create green spaces on the artificial ground. It is believed that the weight against the artificial ground will be reduced, provided the vegetation is possible in the circumstance of the mixed sol with 50 percent of perlite. The study employed a modified Makkink's model by Iwasa who had developed the model for estimating Zoysia matrella's evaporation in the natural ground using the Makkink's formula in 1997 at Chiba University, Japan. The parameter of Makkink's formula is the solar radiation. For that reason, the Makkink's formula is simple and easy to measure the parameter and has a high utility. If the outcomes from mixed soil are close to modified Makkinks formula, the modified Makkink's formula will be applied to estimate in the artificial ground with mixed soil with 50 percent of perlite. Weather observation and actual amount of evaporation of Zoysia matrella have been measured, and the relation between weather condition and actual amount of evaporation had been also investigated. In line with this, we found out that there is a relevant relationship between daily average temperature, the modified Makkink's model by Iwasa, and the actual amount of evaporation. As the results of the experiment, the outcomes from mixed soil with 50 percent of perlite have very high relation to 100 percent soil. In addition, mixed soil has more adhesion with water than natural soil. However, it needs to be adequately maintained in terms of fertilization and damage from disease and harmful insects until the gras fastens its roots into the soil. By using mixed soil with 50 percent of perlite, the load from soil on the artificial ground can be reduced. The study on the growth of the grass throughout the plant vegetation and the actual amount of evaporation in the mixed soil with 50 percent of perlite should be performed in the future.

• 한국지반환경공학회 논문집
• /
• 제6권3호
• /
• pp.25-34
• /
• 2005

사질토상의 직접기초는 기초의 지지력보다 침하량이 기초의 설계에 있어 주요 지배요소이다. 침하량을 산정함에 있어 토질 특성치 중 표준관입시험 N치가 주된 요소이다. 그러므로, 침하량 예측시 장비 효율에 대한 적절한 N치의 보정이 이루어질 때 예측 침하량의 정확성이 확보된다. 특히, N치가 50/30이상인 지반의 경우 롯드의 30cm 관입시 타격수를 기록하는 것이 아니라 일반적으로 50회 타격시 롯드의 관입량으로 N치를 기록하고, 침하량 산정시 N치 50을 일률적용함으로 실측 침하량과 큰 오차를 보이게 된다. 이에, 본 연구에서는 N치 50/30이상인 지반의 침하량 산정을 위한 N치 보정방법을 제시하였다. 또한, 미보정 N치, 보정 N치를 적용하여 탄성이론에 근거한 4가지 방법과 7가지의 경험적 제안식으로 산정한 침하량을 평판재하시험 실측치와 비교 검토하였다. 연구 결과 풍화지반(풍화암)에서 탄성이론에 근거한 방법 중에는 Original Elastic Theory, 경험적 제안식 중에서는 Terzaghi-Peck(1948, 1967) modified 1 방법이 평판재하시험 실측치에 가까운 값을 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.799-802
• /
• 2002

Korea Aerospace Research Institute has been developing a 50-meter class airship to demonstrate the technology to be used in the development of a stratospheric airship, and importance of accurate prediction of the dynamic behavior of an airship before flight test is widely conceived. The added mass has large impact on the dynamic characteristics of an airship unlike for an airplane and the added mass of the airship with empennage is predicted in this paper. At first, the usability of the strip theory is examined which integrates the analytic two dimensional results in the cross section along the longitudinal axis. A panel method with the surface distribution of sources is developed and its validity is also examined. Finally, the panel method with both source and doublet distributions is implemented, and it is validated and applied for the calculation of the added mass of a 50-meter class airship. Using the methods developed, the influence of empennage and control surface deflection on the added mass property of the airship is studied.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.786-791
• /
• 2013

A high voltage pulse generator based on the Blumlein pulse forming line (PFL) was fabricated to produce a voltage pulse whose peak value is ~300 kV and pulse duration is ~50 ns. Three cylindrical electrodes, such as inner, middle, and outer electrodes, are concentrically placed to make a compact PFL. To increase the pulse duration of the output pulse without any change of the size of the generator, the middle electrode is replaced by a helical strip electrode. To determine the radius of the helical electrode, the impedance of the helical Blumlein PFL is calculated using an approximate formula where the dispersive property of the helical Blumlein PFL is not considered. The dependence of the impedance on the frequency is computed by a commercial program. The number of turns in the helical electrode is decided to provide a demanded pulse duration. The experimental result shows that the helical Blumlein PFL is capable of making a high voltage pulse of ~50 ns pulse duration.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.909-912
• /
• 2001

This paper presents the validities of the removal time of side forms considering the relationship between rebound number of P type schmidt hammer and compressive strength. According to test results, compressive strength of 40% of W/C at 12 hours shows 16kgf/$cm^{2}$ and 50% of W/C at 15 hours, 13kgf/$cm^{2}$. Rebound number at 9 hours after casting shows 13 and 9 (W/C 40% and W/C 50%). According to the regression analysis, rebound number of P type schmidt hammer to gain 50kgf/$cm^{2}$ of is estimated 20.1. It is thought that desirable rebound number of P type schmidt hammer to gain 50kgf/$cm^{2}$ is determined 25 considering safety factor.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.131-135
• /
• 2006

The aerodynamic characteristics of a T-50 aircraft configuration are investigated by a subsonic panel method. Panel methods are best applicable to the lifting surfaces such as wings and airfoils. Source and doublets are used in the present code as a basic singularities of the panel technique. The panel method is first assessed by applying it to several benchmark problems for which other solutions and experimental data are available, such as a swept wing and wing body configuration. The prediction results are compared with experimental data and show good agreement in all cases considered. Finally, the method is applied to a T-50 aircraft configuration and excellent agreement with flight test data in lift coefficients is found.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1378-1381
• /
• 2003

Recently, high-performance composite materials have been used for various industrial fields because of their superior high strength, high stiffness and lower weight. In this study, manufactured fiber reinforced metal laminate materials are composed of two parts. One is hard-anodized A15083-O alloy as a face material and the other is high strength aramid fiber (Twaron CT709) and polyethylene fiber(Dyneema HB25) laminates as a back-up material. Resistance to penetration is determined by protection ballistic limit(V$\sub$50/, a static velocity with 50% probability for complete penetration) test method. V$\sub$50/ tests with 0$^{\circ}$ obliquity at room temperature were conducted with 5.56mm ball projectiles that were able to achieve near or complete penetration during high velocity impact tests.