• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.332-344
• /
• 1996

The vertical profiles of the natural $^{210}Po,\;^{210}Pb\;and\;^{234}Th$, activities were measured at the upper 150 m or 200 m of water column from west-east intersection in the east-southern coastal area of the Korea Peninsula during the period from 26 to 29 April 1994 to compare the removal rates (residence time) and removal processes for $^{210}Po\;and\;^{234}Th$. At the inshore stations, the $^{210}Po$ activity was generally higher in the thermocline and its under layer than in the surface mixed layer, while represented the reversed pattern at the offshore stations. However, the $^{210}Pb$ activity decreased generally with depth. Also, the activity of $^{210}Po$ relative to its parent $^{210}Pb$ was deficient in the water column above the main thermocline, but was slightly excess or close to equilibrium in the thermocline and its under layer. The vertical profiles for the activity of $^{210}Pb$ relative to its parent $^{226}Ra$ showed the reversed pattern with the vertical variation of $^{210}Po$ excess (or deficiency). The $^{234}Th$ activity was significantly lower in the surface mixed layer and thermocline than in the deeper layer. The residence time of $^{210}Po$ ranged from 1 to 4 years at the five stations except station E8 that showed yet long residence time (approximately 10 years). The long residence time at the station E8 may resulted from the thicker surface mixed layer and subsequent the vertical mixing of $^{210}Po$ which was recycled in the lower surface mixed layer compared to at the other stations. Also, the residence time of $^{210}Po$ was shorter at the inshore stations than at the offshore stations. However, the residence time of $^{234}Th$ ranged from 52 to 74 days at all station without the significant variation, was very much shorter relative to the residence time of $^{210}Po$. The correlation between the removal rate of dissolved $^{234}Th$ and the concentration of total suspended matter (TSM) was generally positive. Therefore, it seems that the major route of the removal mechanism of $^{234}Th$ from seawater in the surface mixed layer is via adsorption onto suspended particle surfaces (most likely inorganic particles) and subsequent settling to the bottom layer. Between the removal rate of dissolved $^{210}Po$ and the concentration of chlorophyll-a was positively good correlation. Consequently, most likely the removal of $^{210}Po$ may be occurred by uptake to organisms (mainly such as planktonic debris or fecal pellets) and subsequent settling.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.5
• /
• pp.518-528
• /
• 2014

In this paper, we propose a method to recognize the action direction of human by developing 4D space-time (4D-ST, [x,y,z,t]) features. For this, we propose 4D space-time interest points (4D-STIPs, [x,y,z,t]) which are extracted using 3D space (3D-S, [x,y,z]) volumes reconstructed from images of a finite number of different views. Since the proposed features are constructed using volumetric information, the features for arbitrary 2D space (2D-S, [x,y]) viewpoint can be generated by projecting the 3D-S volumes and 4D-STIPs on corresponding image planes in training step. We can recognize the directions of actors in the test video since our training sets, which are projections of 3D-S volumes and 4D-STIPs to various image planes, contain the direction information. The process for recognizing action direction is divided into two steps, firstly we recognize the class of actions and then recognize the action direction using direction information. For the action and direction of action recognition, with the projected 3D-S volumes and 4D-STIPs we construct motion history images (MHIs) and non-motion history images (NMHIs) which encode the moving and non-moving parts of an action respectively. For the action recognition, features are trained by support vector data description (SVDD) according to the action class and recognized by support vector domain density description (SVDDD). For the action direction recognition after recognizing actions, each actions are trained using SVDD according to the direction class and then recognized by SVDDD. In experiments, we train the models using 3D-S volumes from INRIA Xmas Motion Acquisition Sequences (IXMAS) dataset and recognize action direction by constructing a new SNU dataset made for evaluating the action direction recognition.

• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.31-34
• /
• 1979

In this study, enzymatic hydrolysis of the substrate of the waste wood of Cortinellus edodes was investigated using crude cellulase preparation of Trichoderma viride Pers. ex. Fr. SANK 16374. The crude cellulase was produced by the submerged culture process and produced in the culture fluid was salted out quantitatively by the use of ammonium sulfate. Reducing sugar was determined by the dinitrosalisylic acid (DNS) method. 1. The chemical composition of the waste wood was crude protein 2.26%, c. fat 2.57%, c. fibre 44.60%, c. ash 5.58% and lignin 13.62%. In amino acid composition, no cystine and methionine was showed, but trace amount of Vitamin A, $B_1$, and $B_2$, niacine and chloride were detected. (Table 1) 2. As heat treatment of the substrate was found to produce the highest reducing sugar yield being reacted for 48hr. with T.v cellulase, the substrate was heated to $190{\pm}5^{\circ}C$. for 45 min. either before or immediately after milling. 3. The substrate heated and ball milled at $190{\pm}5^{\circ}C$. for 45 min. the reducing sugar yield reached to 11.5%. 4. The substrate without any treatment was found to produce the highest reducing sugar yield being reacted 72hr. with T. v cellulase, the reducing sugar yield reached to 10.1%. 5. The rate of reducing sugar per each treated substrate was decreased by the order of the substrated, heated and then ball milled at $190{\pm}5^{\circ}C$. for 45 min. (11.5%)> without any treatment (10.1)> ball milled and heated at $190{\pm}5^{\circ}C$. for 45 min. (6.9%). 6. Saccharification of waste wood has been shown to be possible by heat treated and milling the substrate in contact with cellulase. And it is likely to be recommended that the waste wood may be valuable for raw materials of saccharification.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.11
• /
• pp.1612-1620
• /
• 2015

Inflammation is a complex process involving a variety of immune cells, which defend the body from harmful stimuli. However, pro-inflammatory cytokines and inflammatory mediators can also exacerbate diseases such as cancer. Onion peel contains several phenolic compounds, including quercetin at an amount 20 times greater in peel than edible flesh. Therefore, in this study, the anti-inflammatory effects of onion peel ethanol extract (OPEE) were investigated lipopolysaccharide-induced inflammatory response. In our results, NO production decreased in a dose-dependent manner. Secretion of IL-6, $TNF-{\alpha}$, and $IL-1{\beta}$ was suppressed by 44%, 53%, and 60% respectively, at $100{\mu}g/mL$. Moreover, OPEE also suppressed expression of COX-2, iNOS, $NF-{\kappa}B$, and MAPKs in a dose-dependent manner. Formation of mice ear edema was reduced at the highest dose tested compared to the control, and reduction of ear thickness was observed in the histological analysis as well. In the acute toxicity test, no morality was observed in mice administered 5,000 mg/kg body weight of OPEE over a 2-week observation period. These results suggest that OPEE may have significant effects on inflammatory factors and be a potential anti-inflammatory material.

• Journal of Korean Society of Forest Science
• /
• v.79 no.3
• /
• pp.269-277
• /
• 1990

In planning the disaster prevention by the erosion control facilities, it is essential to focus on the microtopography of the channel bed and the chronological process of sedimental movement in the torrential streams. For this purpose, the microtopographical change of the channel bed and the effects of the erosion control facilities in the mountain torrents were analyzed by the experimental channel and the field survey of the torrents where low-dam series had been constructed in the channel. The results of this experiment showed that the effects of construction of the low-dam series on the channel bed fixiation were the prevention of the local scouring in the experimental channel and the expansion of flow channel width and deposit space. The results are summarized as follows : 1. When the low-dam series were constructed over the whole channel bed (L'/L=1), the conning water and the sediment were seperated, simultaneously resulting in deposition of sediment and reduction of the tractive force for the running water. Therefore, the F.A. (Fluctuation area in cross-section: value was decreased to about 65% compared with that of non-work (L'/L=0). 2. The efficiencies of the low-dam series on the channel width were increased with an increment in length of working space. After the construction of low-dam series on the whole channel bed (L'/L=1), flow channel width was increased to about 1.53 times compared with that of non-work (L'/L=0). 3. It needs a deposition area to store the sediment with decrease in tractive force. The low-dam series in the experimental channel widened the deposition area about 2.10 times compared with that of non-work.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.840-845
• /
• 2007

The chromaticity, mechanical, and sensory properties of madeleine were investigated during its manufacturing process based on additions of black bean chungkukjang flour containing functional health ingredients and a high nutritient value. 1. The moisture content decreased with increasing content of the chungkukjang flour$(16.1{\sim}13.7%)$. 2. The brightness of the Madeleine decreased significantly from 75.24 to 53.61 by increasing the content of the black bean chungkukjang flour. The degree of red color increased significantly from -0.31 to 4.93 by increasing the content of the black bean chung kukjang flour. 3. For the mechanical properties, the hardness increased significantly with increasing amounts of the black bean chungkukjang flour (p<0.05). The degree of fracturability, adhesiveness, and gumminess also increased with the increasing the content, but the fracturability showed no difference by either addition. The springiness and cohesiveness decreased significantly by increasing the content of the black bean chungkukjang flour, showing an opposite result compared to the hardness. 4. The results of the sensory evaluation indicated significant differences in color among the samples(p<0.05). The color of the madeleine samples with added black bean chungkukjang flour was more preferred than that of the sample without any additive. The degree of preference increased in the order of the quantity of the additive. The moistness and softness became significantly drier and less soft, respectively, with an increasing quantity of the black bean chungkukjang flour (p<0.05). For the overall acceptance, the BC10 sample added with 10% of black bean chungkukjang flour added had the highest acceptance. This may be because it did not have a strong chungkukjang odor and had the fewest differences from the control Madeleine without the additive, in terms of its moistness and softness. Based upon these results, adding10 % of black bean chungkukjang flour in the manufacture of Madeleine is an appropriate quantity with regard to its structural and sensory characteristics.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.2
• /
• pp.171-178
• /
• 1999

The follicular fluid (FF) of ovary contains various biological active products which affected on the growth of follicles and the fertilization of oocyte in physiological reproductive process of mammals. This study was designed to determine the effects of human FF on fertilization of oocyte and embryonal development in vitro culture. The FF was prepared as clear without blood contamination by needle aspiration from mature follicles of human at the time of oocytes retrieval for in vitro fertilization (IVF). As the medium for culture in vitro of embryonal cells, human tubal fluid (HTF) supplemented with follicular fluids at concentrations of 10%, 40% and pure FF were used. These effects were compared to control group of cultured embryos in HTF supplemented with 0.4% BSA (bovine serum albumin). For IVF, 64 eggs in control group, 67 eggs in 10% FF, 57 eggs in 40% FF and 64 eggs in pure FF were respectively allocated. And the rates of fertilization were almost similar in all groups as resulting 82.81% in control, 85.07% in 10% FF, 87.71% in 40% FF and 81.25% in pure FF. On the examination for embryonal cleavage from fertilized eggs, the rates of developing to 4 cell stage was similar in all groups, as results 98.11% in control, 98.27% in 10% FF and 98% in 40% FF but 78.84% in pure FF. And the rates of developing to 8-16 cell stage were significantly reduced as 44% in 40% FF and 44.23% in pure FF (p<0.05) compare to 71.69% in control media. As likewise, the rates of developing to morular stage were also significantly reduced to 36% (p<0.05) and 21.15% (p<0.01) respectively in 40% FF and pure FF. And the rates to blastocystic stage of embryo was lowest as 7.69% in pure FF (Table 1). The quality of embryonal cells on cleavage to the 8-16 cell stage was poorer, higher concentrations of FF. The rates of grade 1 in pure FF, as 23.07%, was lowest compare to those of other groups, in which the rates of grade 1 in control, 10% FF and 40% FF were 58.49%, 47.36% and 34% respectively. And on the contrary, the rate of grade 4 in pure FF was highest as 23.07%, while those were 5.66% in control, 8.77% in 10% FF and 20% in 40% FF (Table 2). On the viability of embryos, the rate of embryonal cell death was more rise, at the higher concentrations as well as longer exposure in the follicular fluid. At 48 hours after in vitro culture of embryos, the rate of survival embryos in pure FF was markedly lowered as 44.23%, compare to that of control (p<0.05). But there was not significant difference between the rates of survival embryos in each group beside the pure FF, which the rates were 77.35% in control, 70.17% in 10% FF and 60% in 40% FF respectively. And at 72 hours after in vitro culture, the rates of survival embryos were also significantly dropped to 21.15% in pure and 36% in 40% at concentration of FF compare to 62.26% in control (p<0.05, p<0.01). Finally, the rate of embryonal death at 96 hours after in vitro culture was highest as 82.69% in pure FF among all groups which those were 35.84 in control, 56.14% in 10% FF and 64% in 40% FF respectively (Fig. 1, 2, 3). In conclusion, this study suggests that the FF has no effects, in particular, to the in vitro fertilization of oocytes but exerted a bad effect to the cleavage, quality and viability of the embryonal cells during in vitro culture. However, the FF is harmful on embryonal development at conditions in higher concentration and especially on the embryos after $8{\sim}16$ cell stage.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.388-395
• /
• 2016

This paper explores the photocatalytic sensitivity of cement mortar incorporated with recycled $TiO_2$ from waste water sludge. Basically, $TiO_2$ cluster sank down slowly to the bottom of cement mortar specimen before setting and hardening process. This leads the mismatch of $TiO_2$ concentration on the top and the bottom faces of a specimen. This poorly dispersed $TiO_2$-cement mortar naturally exhibits poor NOx removal efficiency especially on the top of cementitious structure. In architectural engineering application such as building or housing structures, one can simply filp over from the bottom so that more $TiO_2$ concentrated surface can be placed outward into the air. However, in highway pavement case, this could not be applicable due to in-situ installation of concrete pavement. Hence, the dispersion of $TiO_2$ cluster inside the cementitous material is getting important issue onto road construction application. To elaborate this issue, according to our results, silica fume, high-ranged water reducer, viscosity agent, blast furnace slag were not enhanced much of dispersion characteristics of $TiO_2$ cluster. The combination of foaming agent and accelerator of hardening with viscosity agent and small grain size of fine aggregate may help the dispersion of $TiO_2$ inside cementitious materials. Even though the enhanced dispersion were applied to the specimen, NOx removal efficiency doest not change much for the top surface of the specimen. This concurrently affected by the presence of tiny air voids and the dispersion of $TiO_2$ in that these voids could easily adsorbed NOx gas with the aid of large surface area.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of The Korean Association For Science Education
• /
• v.36 no.5
• /
• pp.739-756
• /
• 2016

The purpose of the study is to reflect on 'myself' as a teacher educator of college of education in depth and to improve my instruction through self-study with three critical collaborators. 17 pre-service science teachers and I have participated in this study of a teacher educator's course since March 2016 after the preliminary practice in 2015. The video recorded the course for 11 weeks with about 40 hours of lessons. The data source also included teacher educator's reflective journals, lecture evaluations, online boards and so on. Questionnaires were distributed and answered both at the beginning and at the end of the course and pre-service teachers wrote their reflective journals. Four of them were in the focus group interviews. During the course, the weekly group meeting of critical collaborators analyzed the emerging issues based on the lesson clips and teacher educator's reflective journals with discussion for the course innovation. Four phases were revealed in the process and for the purpose of the course such as exploration, conflicts, challenges, and changes. The results showed that first, we identified tensions among the teacher educator's multiple identities as a lecturer, a faculty member, and a researcher. Second, there were differences between goals of teacher educator and pre-service teachers in the course, and this obstructed the success of the course sometimes. Third, these practices led to explore balanced alternative views and interpretations of the problem by critical views and to expand and improve our teaching practice and thinking. In addition, the self-study with critical collaborators helped to bring conflicts and issues below my practice to light for collaborative reflection and it gave a chance to understand ourselves as teacher educators in different ways.