• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.181-186
• /
• 2013

Purpose: This study executed therapy plans on prostate cancer (homogeneous density area) and lung cancer (non-homogeneous density area) using radiation treatment planning systems such as $Pinnacle^3$ (version 9.2, Philips Medical Systems, USA) and Eclipse (version 10.0, Varian Medical Systems, USA) in order to quantify the difference between dose calculation according to density in IMRT. Materials and Methods: The subjects were prostate cancer patients (n=5) and lung cancer patients (n=5) who had therapies in our hospital. Identical constraints and optimization process according to the Protocol were administered on the subjects. For the therapy plan of prostate cancer patients, 10 MV and 7Beam were used and 2.5 Gy was prescribed in 28 fx to make 70 Gy in total. For lung cancer patients, 6 MV and 6Beam were used and 2 Gy was prescribed in 33 fx to make 66 Gy in total. Through two therapy planning systems, maximum dose, average dose, and minimum dose of OAR (Organ at Risk) of CTV, PTV and around tumor were investigated. Results: In prostate cancer, both therapy planning systems showed within 2% change of dose of CTV and PTV and normal organs (Bladder, Both femur and Rectum out) near the tumor satisfied the dose constraints. In lung cancer, CTV and PTV showed less than 2% changes in dose and normal organs (Esophagus, Spinal cord and Both lungs) satisfied dose restrictions. However, the minimum dose of Eclipse therapy plan was 1.9% higher in CTV and 3.5% higher in PTV, and in case of both lungs there was 3.0% difference at V5 Gy. Conclusion: Each TPS according to the density satisfied dose limits of our hospital proving the clinical accuracy. It is considered more accurate and precise therapy plan can be made if studies on treatment planning for diverse parts and the application of such TPS are made.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.3
• /
• pp.259-265
• /
• 2006

We polymerized material of AA(Acrylic acid) and BMA(butyl methacrylate) to make up for the weak points of hydrogel contact lens. The synthesis process of silicone synthesis is as follows. Acrylate-PDMS(Polydimethylsiloxane)-Urethane prepolymer was composed after Diisocynate reacted with HEMA(2-hydroxyethylmethacrylate) under the catalyst and it reacted again with bis(hydroxyalkyl) terminated poly(dimethylsiloxane) with high oxygen transmissibility characteristics. HEMA(2-hydroxyethylmethacrylate) was used to make prepolymer that can be polymerized and the urethane was used to improve elasticity and oxygen transmissibility, copolymerization was performed with conventional hydrogel contact lens materials to make silicone hydrogel contact lens with higher oxygen transmissibility. For manufacturing of contact lens, We added BMA(Butyl methacrylate) with better elasticity and flexibility, and AA(Acrylic acid) with higher moisturizing to used contact lens materials. AIBN (Azobis2-methylpropionitrile) as initiator and EGDMA(Ethylene Glycol Dimethacrylat) as crosslinking agent were used and the lens with higher oxygen transmissibility and better moisturizing were manufactured complying with basic contact lens properties, which have several combination trial of each monomer characteristics. Compounding SN which included SILICONE, HEMA, NVP and EGDMA etc was showed by swelling ratio of 9.38% and water content of 23.7%. SN was showed by swelling ratio of 9.38%, water content of 23.7% and a visible ray transmissibility of 89%. SB which added BMA in the SN was showed by swelling ratio of 12.50%, water content of 18.56% and a visible ray transmissibility of 88%. SAB which added both AA and BMA in the SN was showed by swelling ratio of 8.33%, water content of 12.93% and a visible ray transmissibility of 88%.

• The Journal of Society for e-Business Studies
• /
• v.17 no.1
• /
• pp.23-38
• /
• 2012

Massive Multiplayer Online Role Playing Games(MMORPGs) headed by some Korean game companies such as NC Soft, NHN, and Nexon have exploded in recent years. However, it becomes one of the major challenges for the MMORPG developers to design their games to appeal to gamers since only a few MMORPGs succeed whereas they require a huge amount of initial investment. Under this background, our study derives the major elements for designing MMORPG from the literature, and identifies the ones critical to the users' satisfaction and their willingness to pay among the derived elements. Though most previous studies on the design elements of MMORPG have used analytic hierarchy process(AHP), our study adopts artificial neural network(ANN) as the tool for identifying key success factors in designing MMORPG. The results of our study show that the elements of the game contents quality have a bigger effect on the user's satisfaction, whereas the ones of the value-added systems have a bigger effect on the user's willingness to pay. They also show that user interface affects both the user's satisfaction and willingness to pay most. These results imply that the strategies for the development of MMORPG should be aligned with its goal and market penetration strategy. They also imply that the satisfaction and revenue generation from MMORPG cannot be achieved without convenient and easy control environment. It is expected that the new findings of our study would be useful forthe developers or publishers of MMORPGs to build their own business strategies.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.7-18
• /
• 2012

This study suggested a method of forecasting market-share of each mode after introducing new urban rail transit lines. The study reflected the observed market share of presently operating urban rail transit into forecasting process in order to improve accuracy in predicting market share of each modes. For more realistic representation of the forecasting model, we categorized O/D pairs according to attributes of trip distance, access time and number of transfers. The analysis results of traveler's mode choice behavior with observed data showed that the trip distances are longer, the share of urban rail tends to be higher, and that the number of transfers is fewer and the access times are lesser, the share of urban rail also tends to be higher. Then, incremental logit model was used in estimating mode choice probabilities for O/D pairs along with rail transit lines while utilizing observed market shares of each modes and differences in transit service level. As the next step, the market share of rail transit after introducing new rail transit lines was forecasted by using incremental logit model with the intial share values calculated the previous analysis step. It also reflected changes in level of service for automobile in highway due to changes in highway systems and changes in mode shares after introducing new lines of rail transit. It can be expected that the proposed method would more realistically duplicates phenomena of mode choice behavior for rail transit and that it would be more theoretically logical than the typical existing methods using SP data and incremental logit model or using addictive logit model in this country.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.367-375
• /
• 2013

The rice bran, a by-product of rice milling process, is well known for various functional components, such as tocopherol, tocotrienol, ${\gamma}$-oryzanol, carrying antioxidant activities. This study was conducted to investigate the antioxidant components and antioxidant activities in rice bran of different Korean rice cultivars. The 8 isomers of vitamin E, ${\gamma}$-oryzanol, flavonoids, and polyphenolics in rice bran from 16 Korean premium and high quality rice cultivars were quantified. DPPH and ABTS radical scavenging activities and reducing power of the ethanol extracts of rice bran were measured. 'Hopum' showed the highest total vitamin E content, $221.47{\mu}g/g$ among the cultivars, and 'Hanseol' showed the lowest content. The rice bran showed different compositions of ${\alpha}-$, ${\beta}-$, ${\gamma}-$, ${\delta}-$ tocopherol and tocotrienol among rice cultivars. The antioxidant contents were also different by cultivar; the ${\gamma}$-oryzanol contents ranged from 1.99 mg/g (Unkwang) to 4.30 mg/g (Chilbo), the polyphenol contents ranged from 427.22 mg gallic acid eq./100 g (Odaebyeo) to 775.80 mg gallic acid eq./100 g (Hopum). 'Hopum' also had the highest DPPH and ABTS free radical scavenging activities, 9.82% and 187.5 AEAC mg/100 g, respectively. In vitro, the rice bran extracts from 'Hopum' had significantly higher antioxidant activities than that of other cultivars.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.576-587
• /
• 2010

Background: Effective decellularization and fixation process is critical, in order to use xenogenic valves clinically. In the present study, we decellularized bovine pericardium using sodium dodecyl sulfate (SDS) and N-lauroyl sarcosinate, treated with $\alpha$-galactosidase, and then fixed in various manners, to find out the most effective tissue preservation & fixation procedure. Material and Method: Bovine pericardium was decellularized with SDS and N-lauroyl sarcosinate, and treated with $\alpha$-galactosidase. Both groups were fixed differently, by varying glutaraldehyde (GA) or EDC (1-ethyl-3-(3-dimethyl aminopropyl)-carbodiimide)/N-hydroxysuccinamide (NHS) treatment conditions. Thereafter, physical examination, tensile strength test, thermal stability test, cytotoxicity test, pronase test, pronase-ninhydrin test, purpald test, permeability test, compliance test, H&E staining, DNA quantification, and $\alpha$-galactose staining were carried out to each groups. Result: GA fixed groups showed better physical properties and thermal stability than EDC/NHS fixed groups, EDC/NHS-GA dual fixed groups showed better physical properties and thermal stability than EDC/NHS fixed groups, and showed better thermal stability than GA fixed groups. In pronase test and pronase-ninhydrin test, GA fixed groups and EDC/NHS-GA dual fixed groups showed stronger crosslinks than EDC/NHS groups. Permeability and compliance tended to increase in EDC/NHS-GA dual fixed groups, compared to GA fixed groups. But, EDC/NHS-GA dual fixed groups had stronger tensile strength and lower cytotoxicity than GA fixed groups. Conclusion: We have verified that EDC/NHS-GA dual fixation can make effective crosslinks and lower the toxicity of GA fixation. Henceforth, we will verify if EDC/NHS-GA dual fixation can lower calcifications & tissue failure in vivo experiment.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.267-271
• /
• 2013

Test bed studies with highly efficient amine $CO_2$ solvent (KoSol-4) developed by KEPCO research institute were performed. For the first time in Korea, evaluation of post-combustion $CO_2$ capture technology to capture 2 ton $CO_2$/day from a slipstream of the flue gas from a coal-fired power station was performed. Also the analysis of solvent regeneration energy was conducted to suggest the reliable performance data of the KoSol-4 solvent. For this purpose, we have tested 5 campaigns changing the operating conditions of the solvent flow rate and the stripper pressure. The overall results of these campaigns showed that the $CO_2$ removal rate met the technical guideline ($CO_2$ removal rate: 90%) suggested by IEA-GHG and that the regeneration energy of the KoSol-4 showed about 3.0~3.2 GJ/$tCO_2$ which was, compared to that of the commercial solvent MEA (Monoethanolamine), about 25% reduction of regeneration energy. Based on these results, we could confirm the good performance of the KoSol-4 solvent and the $CO_2$ capture process developed by KEPCO research institute. And also it was expected that the cost of $CO_2$ avoided could be reduced drastically if the KoSol-4 is applied to the commercial scale $CO_2$ capture plant.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.272-278
• /
• 2013

The hybrid system composed of a photocatalytic reactor and a biofilter was operated under various operating conditions in order to treat malodorous waste air containing ammonia which is a major air pollutant emitted from composting factories and many publicly owned treatment works. Total ammonia removal efficiency of the hybrid system was maintained to be ca. 80% even though its inlet loads were increased at a higher operating stage according to an operating schedule of the hybrid system. The ammonia removal efficiency of photocatalytic reactor was decreased from 65% to 22% as ammonia inlet loads to photocatalytic reactor were increased. In spite of same inlet loads of ammonia to the photocatalytic reactor, the ammonia removal efficiency of photocatalytic reactor with lower ammonia concentration of fed-waste air was higher than that with higher ammonia concentration of fed-waste air. To the contrary, during the first half of the hybrid system operation the ammonia removal efficiency of a biofilter was quite suppressed while, despite of increased ammonia inlet loads, the ammonia removal efficiency of the biofilter was continuously increased to 78% and reached the ammonia removal efficiency similar to what Lee et al. attained. The maximum ammonia elimination capacity of the photocatalytic reactor was observed to be ca. 16 g-N/$m^3$/h. In an incipient stage of hybrid system run, the ammonia elimination capacity of the biofilter showed little sensitivity against ammonia inlet loads to the hybrid system. However, in the 2nd half of its run, the ammonia elimination capacity of the biofilter was increased abruptly in case of high ammonia inlet loads to the hybrid system. In 6th stage of hybrid system run, total ammonia inlet load attained at ca. 80 g-N/$m^3$/h corresponding to 16 g-N/$m^3$/h of ammonia elimination capacity of the photocatalytic reactor. Then, the remaining ammonia inlet load to the 2nd and main process of the biofilter and its elimination capacity was expected and shown to be ca 64 g-N/$m^3$/h and ca 48 g-N/$m^3$/h, respectively. The ammonia elimination capacity of the biofilter was close to 1,200 g-N/$m^3$/day of the maximum elimination capacity of the investigation performed by Kim et al.

• Journal of East-West Nursing Research
• /
• v.1 no.1
• /
• pp.82-98
• /
• 1997

The purpose of this study was to determine pattern of the stress perceived by stroke patients over time. The ultimate goal of the research is to provide data to help nurses to design the plan of nursing care of the stroke patients both in the hospital and at home. A total of 57 admitted stroke patients were collected from one general hospital in Seoul from June, 12 to September, la, 1993. The data were collected for three phases(within one week after leaving the hospital). The tools for this study, three scales were used ; Stress scale developed by the investigator. Constitution classifing scale designed by Kho(1984), and Self-care measuring scale by Kang(1984). Data were analyzed in four steps using statistical analysis. First, demographic data were determined by descriptive statistics. Second. the pattern of stress perceived by stroke patients across three phases was measured using repeated measures ANOVA. Third, stress of stroke patients classified by constitution, paralyzed area. and attack frequency were measured using ANOVA or t-test, and the pattern of stress by group over time was determined using paired t-test in post hoc test. Fourth. Pearson correlation coefficients were calculated to determine the relationship between the stress and self-care activities. The results of this study are ; 1. The pattern of stress across three phases ; There was a decrease of the stress across three phases. In general. psychological stress as the highest among three phases(F=36.92. P=.000). There was a statistically significant difference of the physical stress(F=34.55, p=.000), the psychological stress (F=15.49, p=.0005) and the social stress (F=24.71. p=.000) among three phases. There was a statistically significant difference of the stress between the first phase (on admission) and the second phase(before leaving the hospital) and was a decrease of the stress (t =6.36. p=.000). 2. The pattern of stress of stroke patients classified by constitution across three phases ; Stroke patients classified as So-Eum perceived the highest stress among three groups(Tae-Eum, So-Eum. So-Yang). There was no statistically significant difference of stress according to the constitution of stroke patients among three phases. Hence. stress was not influenced by the constitution of stroke patients, but there was a statistically significant difference of stress over time. 3. The pattern of stress of stroke patients classified by the paralyzed area across three phases ; Right paralyzed stroke patients perceived higher stress than left paralyzed stroke patients. There was, however, no statistically significant difference of stress between two groups except 2nd phase. There was no statistically significant difference of the perception of stress bet ween the right and left paralyzed stroke patients. 4. The pattern of stress of stroke patients classified by the frequency of the relapse of the disease across three phases ; Stress was higher in stroke patients who had the relapse of the disease twice more than the first time. There was, however, no statistically significant difference of stress between two groups. There was no statistically significant difference of stress of stroke patients according to the relapse of the disease among three phases. Hence, stress was no influenced by the relapse of the disease. 5. The relationship between the stress and self-care activities ; There was a negative relationship between the stress and self-care activities each phase(on admission, r= -.1563 ; before leaving the hospital, r= -.4030 ; after leaving the hospital, r= -.5291). Hence, the higher the self-care activities, the lower the stress. This study has three important findings. First finding was that psychological stress perceived by stroke patients was the highest among three phases. The second finding was that factors such as the constitution, the paralyzed area, and the relapse of the disease did not have an influence on the stress perceived by stroke patients across three phases(on admission, before leaving the hospital, after leaving the hospital). There was a statistically significant decrease of the stress perceived by stroke patients across three phases. The third finding was that there was a negative relationship between the self-care ability and stress. In this study, these findings have implications for nursing care for the rehabilitation of stroke patients and suggest the need of nursing intervention to promote the self-care ability and to support the psychological self-esteem of stroke patients.

• Clean Technology
• /
• v.25 no.4
• /
• pp.311-315
• /
• 2019

The cation extraction and impurity separation were studied in order to investigate the recyclability of a slag produced from the steel refinery industry. Two types of slag (Slag-A, B) were collected and characterized in this study. The initial characterization by X-ray diffraction (XRD) and X-ray fluorescence (XRF) confirmed the existence of various kinds of ions in the slag such as Ca²⁺ (30 ~ 40%), Fe³⁺ (20 ~ 30%), Si⁴⁺ (15%), Al³⁺ (10%), Mn²⁺ (7%), and Mg²⁺ (3 ~ 5%). Inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis on the extracted slag using 2 M HCl as a solvent indicated that a higher concentration of Ca²⁺ was extracted as the S/L ratio was increased. The Ca²⁺ extraction concentration were found to be 8,940 mg L^-1 (Slag-A) and 10,690 (Slag-B) mg L^-1 when the S/L ratio for Ca²⁺ extraction was 0.1. However, the extract was strongly acidic ( < pH 1) at 0.1 S/L. Also the other ions (impurities) were extracted simultaneously in addition to Ca²⁺. To increase the purity of Ca²⁺ in order to transform the slag to a high value resource, a pH-swing was conducted. The impurities tended to precipitate at higher rate as the pH was increased. Notably, the Ca²⁺ rapidly precipitated above a certain pH and at a pH of 10.5, while the selectivity of Ca²⁺ was over 99%. It is expected that the aqueous solution in which high contents of Ca²⁺ was selectively dissolved in this study would be suitable for the carbonation process for reducing CO₂ and for the production of calcium carbonate.