• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1362-1369
• /
• 2018

A method aimed at improving the beam-wave interaction efficiency by changing the coupling slot configuration has been proposed in the study of extended interaction oscillators (EIOs). The dispersion characteristics, coupling coefficient and interaction impedance of the high-frequency structure based on different types of coupling slots have been investigated. Four types of coupled cavity structures with different layouts of the coupling slots have been compared to improve the beam-wave interaction efficiency, so as to analyze the beam-wave interaction and practical applications. In order to determine the improvement of the coupling slot to a coupled cavity circuit in an EIO, we designed four nine-gap EIOs based on the coupled cavity structure with different coupling slot configurations. With different operating frequencies and voltages takes into consideration, beam voltages from 27 to 33 kV have been simulated to achieve the best beam-wave interaction efficiency so that the EIOs are able to work in the $2{\pi}$ mode. The influence of the Rb and the ds on the output power is also taken into consideration. The Rb is the radius of the electron beam, and the ds is the width of the coupling slot. The simulation results indicate that a single-slot-type EIO has the best beam-wave interaction efficiency. Its maximum output power is 2.8 kW and the efficiency is 18% when the operating voltage is 31 kV and electric current is 0.5 A. The output powers of these four EIOs that were designed for comparison are not less than 1.7 kW. The improved coupling-slot configurations enables the extended interaction oscillator to meet the different engineering requirements better.

• Steel and Composite Structures
• /
• 제6권3호
• /
• pp.237-255
• /
• 2006

This paper presents a novel analytical formulation for the analysis of composite beams with partial shear interaction stiffened by a bolted longitudinal plate accounting for time effects, such as creep and shrinkage. The model is derived by means of the principle of virtual work using a displacement-based formulation. The particularity of this approach is that the partial interaction behaviour is assumed to exist between the top slab and the joist as well as between the joist and the bolted longitudinal stiffening plate, therefore leading to a three-layered structural representation. For this purpose, a novel finite element is derived and presented. Its accuracy is validated based on short-and long-term analyses for the particular cases of full shear interaction and partial shear interaction of two layers for which solutions in closed form are available in the literature. A parametric study is carried out considering different stiffening arrangements to investigate the influence on the short-and long-term behaviour of the composite beam of the shear connection stiffness between the concrete slab and the steel joist, the stiffness of the plate-to-beam connection, the properties of the longitudinal plate and the concrete properties. The values of the deflection obtained from the finite element simulations are compared against those calculated using the effective flexural rigidity in accordance with EC5 guidelines for the behaviour of elastic multi-layered beams with flexible connection and it is shown how the latter well predicts the structural response. The proposed numerical examples highlight the ease of use of the proposed approach in determining the effectiveness of different retrofitting solutions at service conditions.

• Genomics & Informatics
• /
• 제1권1호
• /
• pp.7-19
• /
• 2003

The latest measure of the relative evolutionary age of protein structure families was applied (based on taxonomic diversity) using the protein structural interactome map (PSIMAP). It confirms that, in general, protein domains, which are hubs in this interaction network, are older than protein domains with fewer interaction partners. We apply a hypothesis of 'biological network evolution' to explain the positive correlation between interaction and age. It agrees to the previous suggestions that proteins have acquired an increasing number of interaction partners over time via the stepwise addition of new interactions. This hypothesis is shown to be consistent with the scale-free interaction network topologies proposed by other groups. Closely co-evolved structural interaction and the dynamics of network evolution are used to explain the highly conserved core of protein interaction pathways, which exist across all divisions of life.

• 아동학회지
• /
• 제23권1호
• /
• pp.71-85
• /
• 2002

This study examined the effects of different interaction styles, that is, interaction with an object and interaction with an adult, on young children's cognitive level. Subjects were 150 5-year-old children. The task required children to predict the working of a mathematical balance beam. Seven cognitive levels were identified based on the logic of prediction. Data were analyzed by t-test, F-test, Duncan Test and Wilcoxon Matched-Pairs Test. Results showed that both interaction styles caused improvement in children's cognitive level, but when interaction with an adult was divided into two categories, i.e., interaction with the higher group and interaction with the lower group, the latter experienced decline in cognitive level. Regardless of sex, interactions within the Zone of Proximal Development and with the object were found to be effective methods for children's cognitive improvement.

• 한국안전학회지
• /
• 제27권2호
• /
• pp.57-64
• /
• 2012

For the vibration control of earthquake-excited buildings, an optimal design method of integrated control system considering soil-structure interaction is studied in this paper. Interaction between soils and the base of the building is simply modeled as lumped parameters and equations of motion are derived. The equations of motion are transformed into the state space equations and the probabilistic excitations such as Kanai-Tajumi power spectral density function is introduced. Then an optimization problem is formulated as finding hybrid or integrated control systems which minimizes the stochastic responses of the building structure for given constraints. In order to investigate the feasibility of the optimization method, an example design and numerical simulations are performed with tenstory building. Finally, numerical results are compared with a conventional design case that soil-structure interaction is not considered.

• Structural Engineering and Mechanics
• /
• 제31권3호
• /
• pp.349-365
• /
• 2009

Membrane structures are quite sensitive to wind and therefore the fluid-solid interaction can not be neglected in dynamic analysis. A boundary element method (BEM) for 3D simulation of wind-structure interaction in tensile membrane structures is presented in this paper. The flow is treated as incompressible and potential. The flow field is solved with boundary element method codes and structural simulation is performed by finite element method software ANSYS. The nonlinear equations system is solved iteratively, with segregated treatment of the fluid and structure equations. Furthermore this method has been demonstrated to be effective by typical examples. Besides, the influence of several parameters on the wind-structure interaction, such as rise-span ratio, prestress and the wind velocity are investigated according to this method. The results provide experience in wind resistant researches and engineering.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.820-825
• /
• 1994

It is improtant to examine life or crack propagation behavior of structures because of its safety evaluation. The purpose of this study is to investigate the effect of crack-crack interaction to evaluate fatigue life and crack behavior. In this study, the behavior of the interaction of two cracks is studied by experiment. The vertical distance of two cracks is varied to make different interaction stress field. In addition, the effect of plastic zone is considered to examine crack propagation path and propagation rate.

• 대한인간공학회지
• /
• 제35권1호
• /
• pp.53-65
• /
• 2016

Objective: The aim of this study is to configure a taxonomy of uninterpretable Interactions. Background: Following the spread of the Internet, smart devices have increasingly covered our lives. Human beings are now living in an era of tremendous information explosion. We live with numerous interactive targets nowadays, and there are many ways to interact with these targets. Being an interaction designer in this era, we need to clearly understand the existing methods of the interaction. While Bill Moggridge posed interaction design as a new discipline in 1984, it still has not formed a structured framework. Method: This study categorizes uninterpretable interactions through case studies, and configures the taxonomy of uninterpretable interactions based on Object-Oriented View of interaction. To explore the use value and impact of the taxonomy of uninterpretable interactions, this study conducted an experiment and analyzed related results. Results: The framework gives a positive impact on the design process, and interaction designers can clarify and broaden the scope of their ideas. Conclusion: A study on the Taxonomy of Uninterpretable Interactions was the part that did not gain a lot of attention in the existing interaction process. The study made the part more clear. And the study also helps interaction designers expand their roles in the development process of products or services. Application: The taxonomy framework of uninterpretable interactions might help interaction designers design uninterpretable interactions more clearly, and it can also be applied to design interpretable interactions.

• 부모자녀건강학회지
• /
• 제3권2호
• /
• pp.49-66
• /
• 2000

Pregnancy is a task of creation in which a women mobilizes her self and the resources available to her in the generation of a new person. Through the pregnancy, a mother has formed the new human relationship with a fetus. Maternal-fetal relationship is considered one of mechanism making the relationship of mother and child. It is important to well-being of mother and fetus, too. The earliest interaction between a mother and her child is during prenatal period. Maternal-fetal dyad is unique and perceived interactions with the fetus make the pregnancy real for the mother. Maternal behavior is "instinctive" and is formed in early childhood by copy of the mother. But, Rubin argues that this behavior is an open intellectual system rather than a prepackaged bundle of traits. There is openness to new learning and a high value placed on knowing which occurs with silent organization in thought. Thus, nurses and other health professionals provide prenatal care that optimally is part of the environment in which the maternal-fetal dyad develops. Thus it is appropriate for nurses to increases their understanding of the dyad and to explore ways to enhance its development. This study focusses on the interaction ability and response of fetus, and the maternal-fetal interaction. The research of fetal responses that involve physiological changes and motor movement have been shown to coccur to both external sensory stimuli and to maternal emotional states. The fetus does also have sensory capacity to be aware of some maternal behaviors, and the motor ability to respond in a way the mother can notice. Thus, very rudimentary interactions appear to be possible. Maternal awareness of fetal activity was supported by several studies. More interesting to the present study are description of maternal-fetal interaction and the finding that there appear to be levels of sensitivity to the fetus involved in maternal-fetal interactions. First, recognition comes that the fetus is separate from the maternal self. Next, the fetus engages in. Lastly, the parent may describe active interaction with the fetus, believing that mother and fetus are communicating on a meaningful level. Several interventions, developed to promote more active interaction between mother and fetus, have been reviewed. In general, the parents were taught to stimulate the fetus and to notice the fetus' responses. This type of intervention might increase the mother's sensitivity to her unborn baby, and she may have a head start toward learning how to res pond sensitivity to the newborn infant. Research In the area of maternal-fetal interaction is scarce. Sensitive behavior is construed as an appropriate and timely response to a signal of need from another person, but no such signal of need can be claimed regarding the fetus. The highest level of maternal-fetal interaction, therefore, might be based more on maternal representations of the imagined fetus than on factual evidence of fetal participation.

• 한국실내디자인학회논문집
• /
• 제25권5호
• /
• pp.55-62
• /
• 2016

This study was to research and study whether the types of interaction design perform the effective functions and roles as the exhibition space that audiences want centered in the digital media exhibition space. It was to suggest effective space characteristics through analyzing how the interaction design was expressed at the exhibition space and its application. For the analysis, it completes theoretical inquiry on the classification of the space characteristics according to the concept type of interaction and design characteristics. Based on it, it directly visited the exhibition space that reflected the interaction design centered in Seoul City, experienced the given experience, and designed the analyzing frame by composing a checklist after the observation research. Through the designed analysis, it performed a site questionnaire to audiences. It induced the conclusion as follows after analyzing the case space that reflected the interaction design type. First, the program analysis of the space that has the variability is necessary through a variety of digital analysis as there is a limitation that the characteristic of digital media has. Second, in the concept type of the interaction design, it needs the interaction stage among people that can communicate with audiences and stimulate their senses through vidual factors. Third, in the characteristic of the interaction design, it should try to use effective contents to get over the limitation of the space through the interaction in the designated space in case of exhibition. In the following research, it needs to study on the variety of stage plans in detail by supplying contents to audiences and grafting to the exhibition space continuously through using the interaction design that uses digital media at there.