• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.162-165
• /
• 2007

TFT-LCD process has two advantages as compared with the semiconductor-process. It is that cycle time is short and number of the final products are small. But it needs complicated inspection / assembly line to be treated manually and much higher labor costs in the TFT-LCD process. Also, It is necessary to build PICS(Production Information and Control System) which is automated and intelligent. In this paper, an automated process of LCD module assembly line that can increase productivity and reduce the cost of production to strengthen the competitiveness corresponding with global market is planned in comparison with its manual/semi-auto. It is noted that The automated line for COG$\sim$FOG process replacing with the existing facilities had the following effects; the productivity is increased to about 1.5 times and labor cost reduced 85%. In addition, whole assembly line can be short and simple.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.767-770
• /
• 2000

A novel process is newly developed for building RP(Rapid Prototyping) parts using a sheet lamination technique. The build process of existing sheet lamination type RP machines consists of the following steps : feeding, lamination and cutting. In this process, the laminated part of an object is often scratched by a cutter or damaged by a laser beam due to the cutting operation preceded by lamination, In addition, decubing of the unused portion from the laminated block is difficult. In the new process, cutting operation is performed before lamination. The cutting operation takes place while a paper sheet is firmly attached on the plate using electrostatic force. Then liquid glue is applied to the calculated region of the given contour for lamination. The process aims to manufacture a $2k RP machine, what we call the Freeform Mater I, that can use A4 or latter-size used papers. A prototype machine that demonstrates the design concept is built and further research issues are discussed.

• 제어로봇시스템학회논문지
• /
• 제8권10호
• /
• pp.842-846
• /
• 2002

Design of gas concentration process using a fully thermally coupled distillation is conducted with the commercial design software HYSYS. Detailed procedure of the design is explained, and the performance of the process is compared with that of a conventional system A structural design is exercised for the design convenience. The design outcome indicates that the procedure is simple and efficient. The structural information yielded from equilibrium distillation gives an easy formulation of distillation system which is the initial input required from the setup of the distillation system The performance of the new process indicates that an energy saving of 17.6 % is obtained compared with the conventional process while total number of trays maintains at the same.

• 한국컴퓨터정보학회논문지
• /
• 제23권4호
• /
• pp.115-120
• /
• 2018

A Clinical Pathway(CP) is standard process to way of treat diseases or injuries which is adapted to each hospital based on National Clinical Practice Guideline(CPG). Since CP is standard guideline for doctors and nurses working in a hospital, making and modifying CP is one of the most important administrational work for hospital and also rare work because once it is fixed, it's not changed whether there are new kind of disease discovered or new treatment is developed. However, in present, patient's waiting time during hospital residence process, is discussed as service competitive for patients. In this research, we utilize process mining tool to verify patients treatment process follows CP with EMR(Electronic Medical Record) in a sample hospital, and suggest modifcation point of CP through verification.

• Structural Engineering and Mechanics
• /
• 제59권5호
• /
• pp.821-840
• /
• 2016

A simple design process is proposed for supplemental viscous dampers based on structural safety redundancy. In this process, the safety redundancy of the primary structure without a damper is assessed by the capacity and response spectra. The required damping ratio that should be provided by the supplemental dampers is estimated by taking the structural safety redundancy as a design target. The arrangement of dampers is determined according to the drift distribution obtained by performing pushover analysis. A benchmark model is used to illustrate and verify the validity of this design process. The results show that the structural safety redundancy of the structure provided by the viscous dampers increases to approximately twice that of the structure without a damper and is close to the design target. Compared with the existing design methods, the proposed process can estimate the elastic-plastic response of a structure more easily by using static calculation, and determine the required damping ratio more directly without iterative calculation or graphical process. It can be concluded that the proposed process is simple and effective.

• 한국정밀공학회지
• /
• 제13권10호
• /
• pp.130-138
• /
• 1996

In general, the scattler is observed in fatigue test data due to the nonhomogeneity of a material. Consequently. It is necessary to use the statistical method to describe the fatigue crack growth process precisely. Bogdanoff and Kozin suggested and developed the B-model which is the probabilistic models of cumulative damage using the Markov process in order to describe the damage process. But the B-model uses only constant probability ratior(r), so it is not consistent with the actual damage process. In this study, the r-decreasing model using a monotonic decreasing function is introduced to improve the B-model. To verify the model, thest data of fatigue crack growth of A12024-T351 and A17075-T651 are used. Compared with the empirical distribution of test data, the distribution from the r-decreasing model is satisfactory and damage process is well described from the probabilistic and physical viewpoint.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2005년도 춘계학술대회
• /
• pp.7-17
• /
• 2005

Consider a stuffing process where sausage-casings are filled with sausage-kneading. One of the most important factors in the stuffing process is weights of stuffed sausages. Sausages weighting above the specified limit are sold in a regular market price for a fixed price, and underfilled sausages are reworked at the expense of reprocessing cost. In this paper, the sausage stuffing process is inspected for improving productivity and quality levels. Several statistical process control tools are suggested by using real data obtained from a Korean Vienna sausage company.

• 한국기계가공학회지
• /
• 제6권2호
• /
• pp.52-58
• /
• 2007

This study shows a numerical method to predict automobile type air conditioner tube connector in the forming process. The simulation approach with 3-D FEM program(ABAQUS) for forming process, forming process simulation is in good agrement with it in tendency. Finally, we compared the forming result with simulation. The result of research showed thai forming process technology is promising to produce automobile type air conditioner tube connector.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.65-78
• /
• 1998

Process capability indices, used to determine whether a production process is capable of producing items within a specified tolerance, have been widely used in process assessments. In this paper, we consider some process capability indices using loss function when process is contaminated normal. Also, we examine some small sample properties related to these estimaters by some simulations.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2006년도 춘계학술대회
• /
• pp.289-297
• /
• 2006

Business operates under the fast pace of large-scale changes. These changes occur in environments including competitors, markets and consumers. To survive under these changes, process innovation is becoming the eminent issue faced by executives. Process innovation is to generate, select, and implement new ideas adopting changes in organizational structure, management pattern, human resource management systems and so on. Examples include restructuring, outsourcing, benchmarking, total quality management, and business process reengineering. This study suggests how to develop process innovation ideas. Related screening and implementation techniques are also presented.