• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.3
• /
• pp.573-580
• /
• 2001

When investigating optimum design of the evaporator in the refrigeration and heat pump systems, there is still lack of data for the dynamic characteristics of the evaporator, This is due to the fact that the static characteristics in the evaporator are absolutely difficult to measure and are burdened with uncertainties. In this study, the simulation works for static characteristics in the evaporator of small air conditioner are carried out to obtain the data of dynamic characteristics. In the simulation, the test evaporator is divided by two-phase evaporating region and single-phase heating region. The major parameters are refrigerant flow rate, heat transfer coefficient of air, air velocity and air temperature. The results show that the calculation method for tube length is an easy-to-use to model analysis of static characteristics and to determine state of refrigerant in the evaporator. The effects of the four parameters on the length of evaporating completed point and heat flow rate to the evaporator are clarified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.117-120
• /
• 2007

The floor slabs of building structures are often subjected to the periodic force which is induced by vibrating machines or human activity(walking, jumping, running etc). These periodic forces cause excessive oscillation. In order to examine the dynamic characteristics of floor slabs, the dynamic characteristics test is accomplished. Generally, the Impact Hammer and Dynamic Exciter test is used to dynamic characteristics test. But the Impact Hammer test is not suitable to apply in building slabs. In this paper, It compared the performance of the Exciter and Impact Hammer test for dynamic characteristics analysis of floor slabs.

• Korean Institute of Interior Design Journal
• /
• v.15 no.5 s.58
• /
• pp.289-297
• /
• 2006

This study was begun on the premise that architecture which has the definite disposition for survival even in the urban, social structure of that uncertainty and constructs specialty is biomorphic architecture. This study was made with the following four specific purposes largely. First, through the theoretical investigation of biomorphic architecture that appears in the tendency that mordern architecture develops into the architecture of do-stereotype and new form, its meaning and definition are examined. Second, the analysis of biomorphic architecture is investigated and the generation causes are applied architecturally and generate biomorphic architecture is made. Third, by analyzing the material expression characteristics of biomorphic architecture, the meaning and possibility of architecture, which expresses the vitality of organism, as the material expression characteristics of biomorphic architecture, are investigated. The material expression characteristics was deduced through the generation background of biomorphic architecture. The material expression characteristics of biomorphic architecture is the various modeling by smart-network and the response system of sensitivity poly-logue.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.841-848
• /
• 2008

This paper examined dynamic characteristics of high speed trains using a time varying frequency transform. Fourier transform based methods are frequently used for the calculation of the dynamic characteristics of trains in the frequency domain, but they cannot represent the time-varying characteristics. Therefore it is necessary to examine their characteristics using a time-varying frequency transform. For the examination, the non-stationary vibration of wheelset, bogie, and carbody are measured using accelerometers and stored in a data aquisition system. They are processed with localization of the data by modulating with a window function, and Fourier transform is taken to each localized data, called the short-time Fourier transform. From the processed results, time varying auto-spectral density, cross-spectral density, frequency response, and coherence functions have been calculated. From the analysis, it is confirmed that the time varying frequency transform is a useful method for analyzing the dynamic characteristics of high speed trains.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.711-714
• /
• 2008

The objective of this study is to analyze the relationship between the watershed characteristics and the critical duration of design rainfall. For estimation of critical duration, adjustment Huff's method and ILLUDAS urban runoff model were applied to urban 21 areas. Watershed characteristics such as area, channel length, channel slope, shape factor, and pipe density were used to simulate correlation analysis. The conclusions of this study are as follows; it is revealed that critical duration is influenced by the watershed characteristics such as pipe density, area and channel length. Also, multiple regression analysis using watershed characteristics is carried out and the determination coefficient of multiple regression equation shows 0.972.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.17 no.3
• /
• pp.17-26
• /
• 2021

Internet of Things is an infrastructure of the interconnected devices. In Internet of Things environment, many smart devices are used in daily life. It requires a new retrieval method using multiple devices. We propose an information retrieval method using both device characteristics and device usage characteristics in multi-device environments. Firstly, information retrieval is performed using a general purpose device. And then, it is performed using dedicated devices. Our method uses both characteristics of the devices and usage characteristics of them. Moreover, it considers queries on the general purpose device. This paper proposes a new retrieval method and describes algorithms. Then, it presents smart home scenarios. Performance evaluation is performed using the scenarios. The evaluation results show higher precision and efficiency than previous researches. The proposed method gets information more accurately and quickly in IOT multiple device environments.

• 전기의세계
• /
• v.17 no.3
• /
• pp.7-28
• /
• 1968

When a insulator plate is inserted to the discharge path of a space discharge gap in which the field strength is not uniform, the spark voltage under the atmospheric pressure between the electrodes decreases or rises according to the position of the insulating plate. Also it is reported that if a metallic barrier plate is inserted to the discharge path of the same space discharge gap, similar variations of spark voltage are found. Speaking briefly, mensioned above are the spark voltage characteristics when an insulator or metallic barrier is inserted to the space discharge gap. Also some experimental results, concerning to the surface creepage flash over characteristics at the case when an insulator barrier is inserted to the discharge path of a surface creepage discharge gap, were reported by Peek. But up to now there are no reports on surface flash over voltage characteristics at the case when a metallic barrier is inserted to the surface creepage gap. In this study the effects of a conducting metallic barrier inserted to the path of a surface creepage discharge gap on the flash over voltage characteristics are investigated theoretically and experimentally, and got some important results, clearing the effects of the position and width of a conducting barrier is inserted, the surface flash over voltage characteristics appear as an Inverse N or W Characteristics. Such theoretical or experimental results may have some relation not only with the effects of dry belt and snow on suspension insulators, but also with the effects of dirty zone or water drops on the surface creepage flash over voltage.

• MALSORI
• /
• no.53
• /
• pp.17-35
• /
• 2005

A New Method of Extracting the Filter Characteristics of the Nasal Cavity Using Homorganic Nasal-Stop Sequences: A Preliminary R eportHansang ParkThis study provides a new method of extracting the filter characteristics of the nasal cavity. Korean lenis stops are realized as voiced in the homorganic nasal-lenis stop sequences between vowels. Since the only difference between the two members of the homorganic nasal- lenis stop sequences, such as [mb], [nd], and [ g], is whether the passage to the nasal cavity is open or not, the subtraction of the LPC spectrum of the voiced stop from that of the preceding nasal leads to the filter characteristics of the nasal cavity of an individual speaker regardless of place of articulation. The results suggest that various attempts should be made to extract a robust filter characteristics of the nasal cavity by giving variation to LPC coefficients and by paying particular attention to speech samples. This study is significant in that it provides a preliminary report about a new method of extracting the filter characteristics of the nasal cavity.

• Tribology and Lubricants
• /
• v.12 no.4
• /
• pp.43-51
• /
• 1996

Rapid increase of refrigeration & air-conditioning system (r & a system) in modem industries brings attention to the urgency of research & development as a core technology in the area. And it is required to the compatibility problem of r & a system to alternative refrigerant for the protection of environment. Then, it is requested to study the lubrication characteristics of refrigerant compressor which is the core technology in the r & a system. The study of lubrication characteristics in the critical sliding component is essential for the design of refrigerant compressor. Therefore, theoretical investigation of the lubrication characteristics of rotary compressor for r & a system is studied. The Runge-Kutta method is used for the analysis of the behavior of rolling piston in the rotary compressor. The results show that the rotating speed of shaft and the discharge pressure have an important effect upon the angular velocity of the rolling piston. This results give important basic data for the further lubrication analysis and design of the rotary compressor.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.430-437
• /
• 2009

This paper presents the dynamic characteristics of buck and buck-boost dc-dc converters with digital filters. At first, the PID, the minimum phase FIR filter and the IIR filter controls are discussed in the buck dc-dc converter. Comparisons of the dynamic characteristics between the buck and buck-boost converters are then discussed. As a result, it is clarified that the superior dynamic characteristics are realized in the IIR filter method. In the buck converter, the undershoot is less than 2% and the transient time is less than 0.4ms. On the other hand, in the buck-boost converter, the undershoot is about 3%. However, the transient time is approximately over 4ms because the output capacitance is too large to suppress the output voltage ripple in this type of converter.