• Journal of the Korean earth science society
• /
• v.22 no.3
• /
• pp.208-222
• /
• 2001

Geochemical investigations on suspended amorphous iron oxide material from the Kwangyang gold mine and its surrounding area, Cheonnam, Korea have been carried out. The sediments samples were collected from 11 location along Kwangyang mine area and were air dried and sieved to -80 mesh. These samples consist mainly of iron, silicon and alumina. The Fe$_2$O$_3$ contents ranges from 17.9 wt.% to 72.3 wt.%. The content of Fe$_2$O$_3$ increase with decreasing Si, Al, Mg, Na, K, Mn, and Ti, whereas the contents of Te, Au, Ga, Bi, Cd, Hg, Sb, and Se increase in the amorphous stream sediments. Amorphous stream sediments have been severely enriched for As (up to 54.9 ppm), Bi (up to 3.77 ppm), Cd (up to 3.65 ppm), Hg (up to 64 ppm), Sb (up to 10.1 ppm), Cu (up to 37.1 ppm), Mo (up to 8.86 ppm), Pb (up to 9.45 ppm) and Zn (up to 29.7 ppm). At the upstream site, the Au content (up to 4.4 ppm) in the amorphous stream sediments are relatively high but those contents decrease with distance of mine location. The content of Ag (up to 0.24 ppm) were low in upstream site but those contents increase significantly in the downstream sites. The X-ray diffraction patterns of the samples have virtually no sharp and discrete peaks, indicating that some samples are amorphous or poorly-ordered. The quartz, goethite, kaolinite and illite were associated in amorphous stream sediments. The infrared spectra for amorphous stream sediments show major absorption bands due to OH stretching, adsorbed molecular water, sulfate and Fe-O stretching, respectively.

• Journal of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.428-435
• /
• 1988

Some nickel(Ⅱ) and palladium(Ⅱ) complexes of the ambidentate ligands derived from condensation of the isonitrosoacetylacetone and various diamines, $Ni(IAA)_2-en$, $Ni(IAA)_2-pn$, $Ni(IAA)_2-tn$, $Pd(IAA)_2-en$, PdCl(IAA)-pn, and $Pd(IAA)_2$-tn, where (IAA)$_2$-en, $(IAA)_2$-tn, and (IAA)-pn represent N,N'-enthylenbis(isonitrosoacetylacetone imine), N,N'-propylenebis(isonitrosoacetylacetone imine), N,N'-trimethylenebis(isonitrosoacetylacetone imine) and N-(2-aminopropyl)isonitrosoacetylacetone imine, respectively, have been prepared. The nickel(Ⅱ) and palladium(Ⅱ) complexes were characterized on the bases of the elemental analysis, IR, NMR, and electronic spectra. It is suggested that a isonitroso group of (IAA)$_2$-en or (IAA)$_2$-tn coordinates to the metal ion through the nitrogen atom to form five-membered ring, while the other isonitroso group of (IAA)$_2$-en or (IAA)$_2$-tn coordinates to the metal ion through the oxygen atom to form six membered ring in square-planar complexes of Ni(IAA)$_2$-tn and Pd(IAA)$_2$-en. And two isonitroso groups of (IAA)$_2$-en, (IAA)$_2$-pn, or (IAA)$_2$-tn coordinate to the metal ion through the nitrogen atom to form five-membered rings in square-planar complexes of Ni(IAA)$_2$-en, Ni(IAA)$_2$-pn, and Pd(IAA)$_2$-tn. On the other hand, square-planar PdCl(IAA)-pn is formed by the reaction of propylenediamine with a isonitrosoacetylacetone in the presence of palladium(Ⅱ)ion.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.2
• /
• pp.83-92
• /
• 1999

Chitosan was prepared from chitin which was abstracted from wasted crab shells. Then itaconic acid was graft-copolymerized onto chitosan using ceric ammonium nitrate as a reaction initiator. To investigate the optimal grafting conditions, the influences of several factors on the grafting were studied, i. e., the concentrations of CAN and itaconic acid, the reaction temperature and time. And to find out its flocculation ability. the flocculation test was carried out with a metal plating factory waste water. The state of graft-copolymer was identified through IR spectra analysis. The optimal grafting conditions and flocculation results were shown to be : concentration of ceric ammonium nitrate is $3.5{\times}10^3M$, reaction temperature is $40^{\circ}C$ and reaction time is 4hrs with 0.25M of the monomer(itaconic acid). Though flocculation tests using chitosan, grafted chitosan and cation, CODcr. metal ions removal rates were measured. The order of superiority is Itaconic acid grafted chitosan>Chitosan>Cationic polymer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.362-362
• /
• 2014

Atomic layer deposition (ALD) can be regarded as a special variation of the chemical vapor deposition method for reducing film thickness. ALD is based on sequential self-limiting reactions from the gas phase to produce thin films and over-layers in the nanometer scale with perfect conformality and process controllability. These characteristics make ALD an important film deposition technique for nanoelectronics. Tantalum pentoxide ($Ta_2O_5$) has a number of applications in optics and electronics due to its superior properties, such as thermal and chemical stability, high refractive index (>2.0), low absorption in near-UV to IR regions, and high-k. In particular, the dielectric constant of amorphous $Ta_2O_5$ is typically close to 25. Accordingly, $Ta_2O_5$ has been extensively studied in various electronics such as metal oxide semiconductor field-effect transistors (FET), organic FET, dynamic random access memories (RAM), resistance RAM, etc. In this experiment, the variations of chemical and interfacial state during the growth of $Ta_2O_5$ films on the Si substrate by ALD was investigated using in-situ synchrotron radiation photoemission spectroscopy. A newly synthesized liquid precursor $Ta(N^tBu)(dmamp)_2$ Me was used as the metal precursor, with Ar as a purging gas and $H_2O$ as the oxidant source. The core-level spectra of Si 2p, Ta 4f, and O 1s revealed that Ta suboxide and Si dioxide were formed at the initial stages of $Ta_2O_5$ growth. However, the Ta suboxide states almost disappeared as the ALD cycles progressed. Consequently, the $Ta^{5+}$ state, which corresponds with the stoichiometric $Ta_2O_5$, only appeared after 4.0 cycles. Additionally, tantalum silicide was not detected at the interfacial states between $Ta_2O_5$ and Si. The measured valence band offset value between $Ta_2O_5$ and the Si substrate was 3.08 eV after 2.5 cycles.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.464-469
• /
• 2003

In this work, the fragrant oil release behavior of poly($\varepsilon$-caprolactone) (PCL) microcapsules containing SiO$_2$ was investigated. The SiO$_2$ was chemically treated in 10, 20, and 30 wt% hydrochloric acid and sodium hydroxide. The acid and base values were determined by Boehm's titration technique and $N_2$/77 K adsorption isotherm characteristics, the specific surface area and total pore volume were studied by BET. The PCL microcapsules containing SiO$_2$ and fragrant oil were prepared by oil-in-water (o/w) emulsion solvent evaporation method. The shape and surface of PCL microcapsules were observed using image analyzer and scanning electron microscope (SEM). The fragrant oil release behavior of PCL microcapsules was characterized using UV/vis. spectra. The average diameters of PCL microcapsules were decreased from 35 to 21 $\mu$m with increasing stirring rate. It was found that in the case of acidic treatment the fragrant oil adsorption capacity and release rate were increased due to the increase of specific surface area and acid value. In the case of basic treatment, the fragrant oil adsorption capacity and release rate were decreased due to the decrease of sp ecific surface area and the increase of acid-base interactions between SiO$_2$-NaOH and fragrant oil with increasing base value of SiO$_2$.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.2
• /
• pp.97-106
• /
• 2009

It is known that the natural amethyst is changed to citrine after heat treatment. However, when all amethyst samples from Zambia were heat-treated in the temperature range of $350{\sim}380^{\circ}C$ for 1 hour, the result was that five out of eight samples were changed to citrine and all the rest of samples became rock crystal quartz. These differences in the color appearance seem to be influenced by the original colors contained in the amethyst before the heat treatment. The amethyst containing yellow color changed to citrine and the amethyst without containing yellow color changed to rock crystal quartz after the heat treatment. The results compared after the instrumental analysis on the difference of color change, it showed the differences of peak intensity in 3,400 $cm^{-1}$ and the existence and non-existence of peak at the range of 5,200${\sim}$5,400 $cm^{-1}$ in FTIR. It revealed the difference in the quantity of Cr which is a trace element in the WD-XRF analysis. The identical result in the FTIR spectra before and after the heat treatment reveals that the heat treatment did not cause any change in the main composing elements or crystal structure.

• Journal of Life Science
• /
• v.14 no.1
• /
• pp.91-97
• /
• 2004

As a part of our study on the improvement of anticonvulsant, here we report the synthesis of N-acyl-$\alpha$-aminosuc-cinimides 1 and N-acyl-$\alpha$-aminoglutarimides 2. (R)-Benzoic acid 4-benzyloxycarbonylamino-2-oxo-pyrrolidin-1-ylester 6a, (R)-4-nifro-benzoic acid 4-benzyloxycarbonylamino-2- oxo-pyrrolidin-1-yl ester 6b, (R) -4-nitro-benzoic acid 4-benzyloxycarbonylamino-2-oxo-pyrrolidin-1-yl ester 6c, and (R)-propionic acid 4-benzyloxycarbonylamino-2-oxo-pyrrolidin-1-yl ester 6d were synthesized from (R)-2-benzyloxy carbonylamino-succinic acid 3 as a starting meterial. (R)-(3- Benzyloxycarbonylamino-2,6-dioxo-piperidin-1-yloxy)-acetic acid methyl ester 10a, (R)-(3-benzyloxycarbonylamino-2,6-dioxo-piperidin-1-yloxy)-acetic acid ethy1 ester 10b, an d (R)-2-(3-benzyloxycarbonylamino-2,6- diox o-piperidin-1-yl oxy)-propionic acid methyl ester l0c were synthesized from (R)- 3-carbobenzyloxy-amino-glutarmic acid 7 as a starting meterial. The yield, mp, IR, $^1H-NMR,\; and^{13}C$- NMR spectra of the products 6a, 6b, 6c, 6d, 10a, l0b, l0c are summarized in footnote. The biological studies of these compounds are in progress and will be reported in future.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.91-95
• /
• 2009

To examine physico-chemical properties of the polysaccharide extracted from liquid-cultured mycelia of Schizophyllum commune, each the polysaccharide was extracted with hot water treatment and then fractionated with ethanol, alkaline solution and ultrafiltration. And we determined carbohydrate contents, composition of amino acids, infra-red spectrum and viscosity. Carbohydrate contents of polysaccharide treated with ethanol and ultrafiltration were 72.0% and 62.3%, and proteins content were 15.3% and 32.0% respectively. The carbohydrate consisted of four monosaccharides and the protein contained 16 amino acids. The polysaccharide obtained from ultrafiltration was shown an absorption band characteristic of the ${\beta}$-glycosidic linkage by infra red spectra. These results suggest that the polysaccharide extracted from Schizophyllum commune showed the characteristics of proteinbounded polysaccharide, and it was ${\beta}$-glycosidic linkage with strong viscosity.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.501-510
• /
• 2016

In this study, we investigated the degradation of adhesives when exposed to ultraviolet light irradiation using samples of lacquer (L), treated lacquer (TL), lacquer mixed with glue (LG), and urushiol mixed with glue (UG). Four types of film specimens were collected under the ultraviolet exposure time, and gloss test, tensile shear strength test, scanning electron microscope analysis, and infrared spectroscopic analysis were conducted for the specimens. LG and UG showed lowering rate of gloss is somewhat later than L. Also, it was observed that with increasing exposure time to ultraviolet irradiation, the surface of L began to show spherical pits and cracks when the polysaccharide layers started to be exposed, whereas the surfaces of LG and UG remained smooth. The Infrared spectra of L and TL showed that the intensity of the overall peak decreased with increasing ultraviolet irradiation time. There was no change in the peak intensity of LG, but for UG, the peaks at $3013cm^{-1}$, $1593cm^{-1}$ and so on disappeared and the overall intensity declined. The tensile shear strength of LG and UG was maintained or increased as compared to the initial test, whereas the tensile shear strength of L decreased sharply after 600 h. LG and UG exhibited fewer changes as a result of high temperature and humidity conditions, and they retained their strength under UV exposure. These results indicate that LG and UG are more durable than L when subjected to environmental change.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1169-1176
• /
• 2014

In this study, water-dispersible ZnS:Mn nanocrystals were synthesized by capping the surface with conventional and simple structured amino acid ligands: $\small{L}$-Glycine and $\small{L}$-Alanine. The ZnS:Mn-Gly and ZnS:Mn-Ala nanocrystal powders were characterized by XRD, HR-TEM, EDXS, ICP-AES, and FT-IR spectroscopy. The optical properties were measured by UV-Visible and photoluminescence (PL) spectroscopy. The PL spectra for the ZnS:Mn-Gly and ZnS:Mn-Ala showed broad emission peaks at 599 nm and 607 nm with PL efficiencies of 6.5% and 7.8%, respectively. The measured average particle size from the HR-TEM images were $6.4{\pm}0.8$ nm (ZnS:Mn-Gly) and $4.1{\pm}0.5$ nm (ZnS:Mn-Ala), which were also supported by Debye-Scherrer calculations. In addition, the degree of aggregation of the nanocrystals in aqueous solutions were measured by a hydrodynamic light scattering method, which showed formation of sub-micrometer size aggregates for both ZnS:Mn-Gly ($273{\pm}94$ nm) and ZnS:Mn-Ala ($233{\pm}34$ nm) in water due to the intermolecular attraction between the capping amino acids molecules. Finally, the cytotoxic effects of ZnS:Mn-Gly and ZnS:Mn-Ala nanocrsystals over the growth of wild type E. coli were investigated. As a result, no toxicity was shown for the ZnS:Mn-Gly nanocrystal in the colloidal concentration region from 1 ${\mu}g/mL$ to 1000 ${\mu}g/mL$, while ZnS:Mn-Ala showed significant toxicity at 100 ${\mu}g/mL$.