• Journal of Photoscience
• /
• 제9권2호
• /
• pp.376-378
• /
• 2002

Role of cl$^{[-10]}$ in photosynthetic oxygen-evolving complex was studied by light-induced Fourier transform infrared (FTIR) spectroscopy. cl$^{[-10]}$ depletion resulted in the suppression of amide I and amide II IR modes upon S$_1$ to S$_2$ transition. Br$^{[-10]}$ , 1$^{[-10]}$ and N0$_3$$^{[-10]}$ substituted FTIR difference spectra were very similar to that in cl$^{[-10]}$ reconstitution. F$^{[-10]}$ and $CH_3$COO$^{[-10]}$ substituted spectra were largely distorted. We succeeded in detecting the structural change of N0$_3$ $^{[-10]}$ in the cl$^{[-10]}$ site upon the S$_1$ to S$_2$ transition from $^{14}$ N0$_3$$^{[-10]}$ /$^{15}$ N0$_3$$^{[-10]}$ difference spectrum.

• 천문학논총
• /
• 제27권4호
• /
• pp.321-324
• /
• 2012

Using extensive mid-IR datasets from AKARI, i.e. 9-band photometry covering the wavelength range from $2{\mu}m$ to $24{\mu}m$ and the unbiased spectroscopic survey for sources with $S_{\nu}$($9{\mu}m$)>0.3 mJy, we study starburst galaxies specifically at the redshift of z ~ 0.5, whose mid-IR spectra are clearly dominated by the PAH emission features. PAH-selected galaxies, selected with extremely red mid-IR colour due to PAHs, have high rest-frame PAH-to-stellar luminosity ratios, comparable to those in the most active regions in nearby starburst galaxies. Thus, they seem to have active starburst regions spreading over the whole body. Furthermore, some of PAH-selected galaxies are found to have peculiar rest-frame 11-to-$8{\mu}m$ flux ratios, which is systematically smaller than nearby starburst/AGN spectral templates. This may indicate a systematic difference in the physical condition of ISM between nearby and distant starburst galaxies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.233-237
• /
• 1991

In the study, samples were made on the electrode in internal glass bell jar by the radio frequency discharge polymerization. The polymerization rate of samples was observed as a function of r.f. discharge power. The characteristics of polymers obtained from TMDSO and HMDSO were analyzed by FT-IR and TGA, and their electrical properties were examined on insulation resistivity, breakdown voltage, dielectric constant, and tan ${\delta}$. (1) There was no difference between PPTMDSO and PPHMDSO in a polymerization rate and thermal and electrical properties. (2) The growing rates of thin film with discharge powers were from $0.42{\mu}/h$ to $1.2{\mu}m/h$. (3) According to IR spectra analysis, discharge power did not effect polymer structure due to polyermization mechanism and effected only polymerization rate. (4) PPTMDSO and PPHMDSO were thermally resistive polymers which did not decompose to $300^{\circ}C$.

• 한국분말재료학회지
• /
• 제18권2호
• /
• pp.176-180
• /
• 2011

Study of the main properties of PVDF films produced by two processing technologies such as hot pressing from a melt or solution casting was the aim of this paper. All samples were prepared of as-received PVDF powder. First group of samples was prepared by the hot pressing. Second group of samples was prepared by the solution casting method. PVDF powder was dissolved in dimethylformamide. To characterize properties of samples, different experimental methods such as FRA (dielectric spectroscopy), IR-spectroscopy and DSC/TGA analysis were used in this work. It was found that IR-spectra of both studied groups do not change compared to that for virgin PVDF powder. It confirms that molecular structure is practically independent on the processing technology of samples. The only difference has been found that new band centered at $1723\;cm^{-1}$ appears for samples prepared by the hot pressing method. This absorption band is related with formation of C=C bonds in samples prepared by the hot pressing method in contrast both to PVDF powder and samples prepared by the solution casting method.

• Journal of Ginseng Research
• /
• 제24권3호
• /
• pp.107-112
• /
• 2000

적변삼 표피조직의 적갈색의 침적물은 강력한 산화제에 의해서만 산화(탈색)되는 chelation power가 매우 큰 화학결합을 형성하고 있었다. CLSM으로 관찰한 결과, 적변삼 조직의바깥쪽으로 두껍게 침적물이 형성되어 있음이 확인되었으며, 조직의 형광강도를 이용하여 두께를 측정한 결과 약 120rm의 침적물이 축적되어 있음이 확인되었다. 또한 Spectrum분석 결과 적변삼 표피의 물질은 건강삼의 표피조직과는 다른 functional group을 포함하는 것으로 확인되었다. 건강삼과 적변삼의 표피조직을 강산과 강염으로 가수분해 하여도 조직에 침적되어 있는 적색의 물질은 용출되지 않았다. 적변삼과 건강삼의 표피조직과 뿌리의 각 부위별 총 페놀성화합물의 함량을 측정한 결과, 건강삼의 표피조직에서 가장 높게 나타났다. 이러한 결과는 페놀성 물질이 적변물질의 원인이 된다는 보고와 차이가 있는 것으로 페놀성 물질은 적변현상 유발의 직접적인 원인물질이 아님이 확인되었다. 따라서 인삼의 적변물질은 인삼뿌리의 유기성분(세포벽 분해산물, 세포내용물, azodicarbonamide 등)과 철이온 복합체로 추론되며, 이물질에 대한 계속적인 추적을 진행하고 있다.

• Bulletin of the Korean Chemical Society
• /
• 제16권7호
• /
• pp.591-594
• /
• 1995

The influence of protecting groups on the β-sheet-structure-stability of protected peptides was studied in organic solvents. α-amino groups, carboxyl groups and side chain functional groups of model peptides were protected by suitable groups commonly used in peptide synthesis. The difference of the solubilities of model peptides was investigated by the solvent-titration method by using IR absorption spectra. The β-sheet structure of model peptide in CH2Cl2 was easily disrupted by increasing the amounts of DMSO. The β-sheet-structure-stabilizing potentials of each protecting group showed similar behaviors except Npys, Mts and Z2. The result exhibits that the < SPβ > values of protected peptides are almost independent of the kinds of their protecting groups.

• 전자공학회논문지A
• /
• 제29A권1호
• /
• pp.33-40
• /
• 1992

4인치(100) 실리콘 기판상에 센서용 다이아프램을 제조할 때 생기는 식각 현상들을 관찰하고 분석하였다. 115$^{\circ}C$의 "F etch' 용액을 사용하여 300$\mu$ 이상의 깊은 식각을 행하였을 때 식각 표면에 발생하느 식각 결함은 hillock, 반응 생성물, 그리고 횐색 잔유물로 구분될 수 있었따. 특히 hillock의 경우 식각 표면에 부착된 반응 생성물의 밀도나 크기에 관계하여 |111|면들로 이루어질는 피라밋 구조나 사다리꼴 육면체등의 형태를 취함이 확인되었다. 또한 용해된 실리콘의 국부적인 과잉 포활 발생하는 흰색 잔유물의 IR 흡수 스펙트럼을 조사한 결과, Si-N-O 성분에 미량의 h와 C가 포함된 것임을 알 수 있었다. 아울러 식각면을 식각용액에 대해 아래쪽, 위쪽, 그리고 측면을 향하도록 놓았을때 식각 결함의 존재 확률과 분포 그리고 식각율의 분포를 비교한 결과 식각율의 균일성면에서는 하측방향의 자세가, 식각결함의 제거에 있어서는 측면방향의 자세가, 식각결함의 제거에 있어서는 측면방향의 자세가 유리하게 나타났으며 이를 반응조내의 흐름 패턴을 이용하여 해석하였다.

• 한국광물학회지
• /
• 제2권1호
• /
• pp.26-36
• /
• 1989

Clinopyroxene in the Geodo mine belongs to diopside-hedenbergite series. It is widely distributed throughout the mine area together with garnet and is also closely related with Fe-mineralization. Clinopyroxenes in the Geodo mine including two samples from the sangdong and Ulchin Mines are studied using polarized microscope, EPMA, XRD, and IR spectroscopy for occurrence, chemistry, structure, and crystal chemistry. Especially, variations in unit-cell parameters are examined in relation with the substitution scheme between Fe and Mg cations. Clinopyroxenes in the Geodo mine occur in both endoskarn and exoskarn zone. It is mostly anhedral to subhedral with fine- to medium-grained in texture, but some have bigger crystals of short prismatic or columnar habits. Clinopyroxene occurs as monomineralic or is associated with mostly garnet and sometimes with actinolite, magnetite, epidote, and chlorite. Chemical analysis reveals that the Geodo clinopyroxene is diopsidic in composition (Di: 65-96%). This fact is in good contrast with garnet chemistry showing mostly andraditic (An: 41-82%). Especially, clinopyroxene coexisting with magnetite belongs to nearly end member diopside (Di: 97-99%). Thus, diopside-andradite pair indicates that Geodo skarns were formed under the reduced environment. X-ray diffraction analysis shows unit-cell parameters vary with increase of Fe contents: a = 9.765-9.838$\AA$, b = 8.943-9.020$\AA$, c= 5.240-5.253$\AA$.$\beta$ = 105.70-104.83$^{\circ}$, and V =440.64-448.19$\AA$3. It is noted from the least square regression that a, b and V increase linearly with increase of Fe content, while $\beta$ slightly decreases and c remains nearly unchanged as change in Fe content. These trends are to difference between synthetic and natural clinopyroxenes. This fact is also recognized in IR spectra which show a slight shift of several absorption bands toward lower wavenumber region with increasing Fe content.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.41-47
• /
• 2003

Recently, interest in utilization plan of recycling paper have been enhanced. Therefore, this research aimed to develop the manufacture process of cellulose acetate using old newsprint by acetosolv pulping process. And the manufactured cellulose acetate was also analyzed, especially based on chemical properties. The summarized results in this research were as follows; Reaction time, kind and amount of catalyst, and ratio of liquor to material were varied during acetosolv pulping process of old newsprint. Ratio of liquor to material did not give the significant difference in reaction product. Delignification rate was increased with increasing reaction time during acetosolv pulping, but yield and degree of substitution decreased with increasing reaction time. Sulfuric acid are better catalyst than hydrochloric acid in acetosolv pulping process for old newsprint, and optimal addition amount of catalyst was 1% based on reaction material. Delignification, yield, and degree of substitution were influenced by the catalyst and reaction time. Under pulping condition of $120^{\circ}C$ in 1/12 liquor to material ratio and 60min, degree of substitution was about 0.7. The acetylation reaction was not completely caused by these reaction condition. The examination of the FT-IR spectra revealed that absorption band(1200$\textrm{cm}^{-2}$, 1,750$\textrm{cm}^{-1}$) caused by carbonyl group were confirmed.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.257-263
• /
• 2006

This paper examines the physico-chemical properties and structural features of thio lignin and alcohol lignin preparations extracted from fast-growing poplar wood. The lignin preparations were characterized using UV, IR and alkaline nitrobenzene oxidation methods. The yield was higher in thiolignin due to its preparation from wood under drastic alkaline conditions and almost the total amount of alkaline degraded lignin was precipitated except acid soluble lignin. In case of ethanol lignin, structural modifications were comparatively less and form a cream colored lignin more or less similar to its original natural color. The methoxyl values were higher due to syringyl unit present in hard wood lignin in addition to guaicyl unit present in soft wood. The higher values of methoxyl content of isolated lignin revealed that it was built up of high syringyl units. The elementary analysis, methoxyl group and hydroxyl groups were presented by $C_{9}$ formula indicated that it was made up of phenyl propane monomers. Nitrobenzene oxidation of thio lignin and ethanol lignin yield more or less the chromatograms of similar pattern, except difference in relative percentage. The ultra violet spectra of lignins were quite similar, irrespective of the source and method of isolation. Infrared spectroscopy studies of poplar deltoides, thio and ethanol lignin shown different absorption bands which have been utilized for structural investigations.