• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.990-995
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with ethylene diamine(EDA) and hexamethylene diamine(HMDA) in a stoichiometrically equivalent ratio. From this work, the effect of linear amine curing agents on the thermal and mechanical properties is significantly influenced by the chemical structure or chain length of curing agents. In contrast, the results show that the DGEBA/EDA system having the two carbons had higher values in the thermal stability, maximum conversion of epoxide, density, glass transition temperature, tensile modulus, flexural strength, and flexural modulus than the DGEBA/HMDA system having the six carbons, whereas the DGEBA/EDA cure system had relatively low values in the shrinkage(%), thermal expansion coefficient, tensile strength, and had similar values in the maximum exothermic temperature, and conversion of epoxide compared to the DGEBA/HMDA cure system. This findings indicate that packing ability in the HMDA structure affects the thermal and mechanical properties.

• Clinics in Shoulder and Elbow
• /
• v.5 no.2
• /
• pp.88-97
• /
• 2002

The purpose of this study was to compare the outcomes between arthroscopir repair and mini-open repair of medium and large rotator cuff tears in which arthroscopic repair was technically unsuccessful. We evaluated 76 patients of full-thickness rotator cuff tears, among them 42 patients had all-arthroscopic and 34 patients had mini-open salvage repairs. Patients who had acromioclavicular arthritis, subscapularis tear, or instability were excluded. There were 39 males and 37 females with mean age of 56 years (range,42 to 75 years). At a mean follow-up of 39 months (range, 24 to 64 months), the results of both groups were compared with regard to the UCLA and ASES shoulder rating scale s. Shoulder scores improved in all ratings in both groups (p > 0.05). Overall, sixty-six patients showed excellent or gr)of and ten patients showed fair or poor scores by the UCLA scale. Seventy-two patients satisfactorily returned to prior activity. Four showed unsatisfactory return. The range of motion, strength, and patient's satisfaction were improved postoperatively. There were no difference in shoulder scores, pain, and activity return between the arthroscopic and mini-open salvage groups (p > 0.05). However, Patients with larger size tear showed lower shoulder scores and less predictive recovery of the strength and function (p < 0.05). Postoperative pain was not different with respect to the size of the tear (p : 0.251). Arthroscopic repair of medium and large full-thickness rotator cuff tears had iln equal outcome to technically unsuccessful arthroscopic repairs, which were salvaged by conversion to a mini- open repair technique. Surgical outcome depended on the size of the tear, rather than the method of repair.

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.30-37
• /
• 2018

This study is an analysis of combustion characteristics of synthetic insulation materials such as houses and warehouses. Using combustion cone calorimeter and SEM, the researching has experimented combustion characteristics of four kinds of materials such as flame retardant styrofoam, general styrofoam, urethane and gypsum board. And analyzed. As a result of the test, the ignition time (TTI) for the thermal insulation material was found at 27 s~43 s, and the flame retardant styrofoam was ignited at the lowest TTI at 27 s and disappears at 28 s. In addition, the maximum heat release rate (peak HRR) and average heat release rate (mean HRR) of each material were expressed in the following order: urethane> flame retardant styrofoam> styrofoam> gypsum board. Also, the total smoke release ($m^2/m^2$) was the largest at $30.798m^2/m^2$ in flame-retardant styrofoam. The general CO concentration of styrofoam was 0.275 kg/kg and the emission concentration was 12.807 kg/kg. The residues showed the highest 0.029 g in the gypsum board among the above materials.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.6
• /
• pp.456-463
• /
• 2011

The present study examined the effects of Korean white ginseng (WG, Panax ginseng C. A. Meyer) on the learning and memory function and the neural activity in rats with trimethyltin (TMT)-induced memory deficits. The rats were administered with saline or WG (WG 100 or 300 mg/kg, p.o.) daily for 21 days. The cognitive improving efficacy of WG on the amnesic rats, which was induced by TMT, was investigated by assessing the Morris water maze test and by performing immunohistochemistries on choline acetyltransferase (ChAT), acetylcholinesterase (AchE), cAMP responsive element binding protein (CREB) and brain derived neurotrophic factor (BDNF). The rats treated with TMT injection (control group) showed impaired learning and memory of the tasks, but the rats treated with TMT injection and WG administration produced significant improvement of the escape latency to find the platform in the Morris water maze at the 2nd and 4th days compared to that of the control group. In the retention test, the WG 100 and WG 300 groups showed significantly increased crossing number around the platform compared to that of the control group (p < 0.001). Consistently with the behavioral data, result of immunohistochemistry analysis showed that WG 100 mg/kg significantly alleviated the loss of BDNF-ir neurons in the hippocampus compared to that of the control group (p < 0.01). Also, treatment with WG has a trend to be increased the cholinergic neurons in the hippocampal CA1 and CA3 areas as compared to that of the control group. These results suggest that WG may be useful for improving the cognitive function via regulation of neurotrophic activity.

• Korean Journal of Materials Research
• /
• v.26 no.12
• /
• pp.733-740
• /
• 2016

$Al_2O_3$ nanosol dispersed under ethanol or N-Methyl-2-pyrrolidone(NMP) was studied and optimized with various dispersion factors and by utilizing the silane modification method. The two kinds of $Al_2O_3$ powders used were prepared by thermal decomposition method from aluminum ammonium sulfate$(AlNH_4(SO_4)_2)$ while controlling the calcination temperature. $Al_2O_3$ sol was prepared under ethanol solvent by using a batch-type bead mill. The dispersion properties of the $Al_2O_3$ sol have a close relationship to the dispersion factors such as the pH, the amount of acid additive(nitric acid, acetic acid), the milling time, and the size and combination of zirconia beads. Especially, $Al_2O_3$ sol added 4 wt% acetic acid was found to maintain the dispersion stability while its solid concentration increased to 15 wt%, this stability maintenance was the result of the electrostatic and steric repulsion of acetic acid molecules adsorbed on the surface of the $Al_2O_3$ particles. In order to observe the dispersion property of $Al_2O_3$ sol under NMP solvent, $Al_2O_3$ sol dispersed under ethanol solvent was modified and solvent-exchanged with N-Phenyl-(3-aminopropyl)trimethoxy silane(APTMS) through a binary solvent system. Characterization of the $Al_2O_3$ powder and the nanosol was observed by XRD, SEM, ICP, FT-IR, TGA, Particles size analysis, etc.

• Journal of Acupuncture Research
• /
• v.27 no.6
• /
• pp.31-42
• /
• 2010

Objectives : The aim of this study was to investigate the anti-obesity potential and mechanisms of action of Rhizoma Atractylodis(RA) herbal acupuncture in high fat diet- induced obese ICR mice. Methods : Sample solutions for herbal acupuncture were prepared from the Rhizoma Atractylodis water extract powder at concentration of 150mg/kg and 300mg/kg with distilled water. Five week-old ICR mice acclimatized to the laboratory environment for 1 week were allocated into four groups: regular diet group (RD), high fat diet group(HFD), groups fed HFD with 150mg/kg RA herbal acupuncture treatment (RAE 150) and with 300mg/kg RA herbal acupuncture treatment(RAE 300). Herbal acupuncture groups were injected with either 150mg/kg or 300mg/kg of Rhizoma Atractylodis(RA) subcutaneously onto both Sinsu($BL_{23}$) alternately on the same time everyday for 30days. Body weight, gross appearance of epididymal fat area, blood glucose, insulin, insulin resistance(HOMA-IR), non-esterified fatty acid, cholesterol, triglyceride, AST, ALT, histological analysis of white adipose tissue, gene expression responsible for adipocyte differentiation and AMPK activation were analyzed. Results : RA herbal acupuncture inhibited the development of weight gain, hyperglycemia, hyperinsulinemia, hyperlipidemia, increases of AST and ALT, and the enlargement of fat cell size induced by HFD. Also, RA herbal acupuncture inhibited the expression of PPAR-${\gamma}$, C/$EBP{\alpha}$, aP2, LPL, FAS, SCD-1 and enhanced the activation of AMP-activated protein kinase. Conclusions : The results of this study demonstrate that RA herbal acupuncture can exert the anti-obesity effect and it is partially mediated by activation of AMPK and inhibition of the gene expressions responsible for adipocyte differentiation. Further studies will be required to ascertain the nti-obesity effect and mechanisms of action of RA herbal acupuncture in animal models and human for aclinical application.

• Journal of KIISE
• /
• v.41 no.11
• /
• pp.892-899
• /
• 2014

Dynamic binary instrumentation is a code insertion technique for debugging a program without scattering its execution flow, while the program is running. Most dynamic instrumentations are implemented using dynamic binary translation techniques. Existing studies translated program codes dynamically by parsing the machine code stream to intermediate representation (IR) and then applying compilation techniques for IRs. However, they have high overhead during translation, which is a major cause of difficulty in applying the dynamic binary translation technique to the program which requires high responsiveness. In this paper, we introduce a light-weight dynamic binary instrumentation framework based on a novel dynamic binary translation technique which has low overhead while translating the program code. In order to reduce the translation overhead, our approach adopts a tabular-based address translation and exploits a translation bypassing scheme, which stores the translated address of a frequently called library function in advance. It then accesses the translated address and executes function codes without code translation when calling the function. Our experiment results demonstrated that the proposed approach outperforms the prior dynamic binary translation techniques from 2% up to 65%.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.129-135
• /
• 2013

Japanese larch (Larix leptolepis) has been extensively planted in Korea as a reforestation species but their supply has been a major bottleneck due to sporadic natural seed production. In this study, stem girdling was applied to 32-year-old grafted Japanese larches, resulting in significantly enhanced seed production compared to the controls. Stem girdling induced about 4 times higher cone production than that of controls in the Japanese larch seed orchard. Time-dependent metabolic alterations after girdling were investigated by stable isotope ratio mass spectrometer, HPLC, and GC-MS analysis. In girdled trees, the contents of total nitrogen, sucrose, and total free amino acids were significantly higher than the non-girdled trees at the flowering differentiation season (from July to August). Moreover, the numbers of female strobilus per tree were positively correlated with the contents of both total nitrogen (r=0.765, p<0.01) and total amino acids (r=0.802, p<0.01) in the bark being collected at the flowering differentiation time (August 20). Interestingly, the levels of various individual amino acids at the flowering differentiation times, such as aspartic acid, glutamic acid, glycine, serine, and cysteine, were also significantly correlated (p<0.05) with the numbers of strobilus, suggesting that those amino acids might be involved in the induction of female strobilus formation of Japanese larches.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.2
• /
• pp.171-177
• /
• 1998

The strain A49, which produces a new type of extracellular polysaccharide was isolated from soil samples. From morphological, physiological and biochemical tests, the strain A49 was identified as a Bacillus polymyxa and named Bacillus polymyxa A49. Bacillus polymyxa A49 was found to produce a highly viscous extracellular polysaccharide when grown aerobically in a medium containing glucose as the sole source of carbon. The polysaccharide (A49 POL) showed a homogeneous pattern on gel permeation chromatography (GPC) and its molecular weight was estimated to be about 1.6 mega dalton (mDa). The FT-IR spectrum of A49-POL revealed typical characteristics of polysaccharides. As a result of investigations with HPLC and carbozole assay, A49-POL was found to consist of L-fucose, D-galactose, D-glucose, D-mannose, and D-glucuronic acid, with the molar ratio of these sugars being approximately 1:2:7:50:12. Rheological analysis of A49 POL revealed that it is pseudoplastic and has a higher apparent viscosity at dilute concentrations than does xanthan gum. The consistancy factor of A49 POL was found to be higher, and the flow index of A49 POL lower, than xanthan gum. Its apparent viscosity was comparatively unstable at various temperatures. the A49 POL showed the highest apparent viscosity at pH 3. When salts were added to A49 POL solution, the solution was compatible with up to 10% KCl, 35% NaCl, 55% $CaCl_2$, 55% $MgCl_2$, 55% $K_2HPO_4$, and 110% $Ca({NO_3})_2$, respectively.

• Microbiology and Biotechnology Letters
• /
• v.44 no.4
• /
• pp.470-478
• /
• 2016

A bacterium producing a large amount of chitinolytic enzyme was isolated from the intestinal tract of earthworm. The isolate was identified as Bacillus licheniformis by 16S ribosomal RNA analysis and designated as B. licheniformis GA9. The enzyme was purified by 40-60% ammonium sulfate precipitation, diethyl-aminoethyl groups exchange chromatography, and gel filtration chromatography. The molecular weight was estimated to be 52.1 kDa and the N-terminal amino acid sequence was D-S-G-K-N-G-K-I-I-R-Y-YP-I-R. The optimum activity of the purified chitinolytic enzyme was shown at pH 5.0 and $40^{\circ}C$, and the enzyme was stable in the ranges of $20-50^{\circ}C$ and pH 5.0-6.0. Enzyme activity was increased by $Co^{2+}$, while it was inhibited by $Cu^{2+}$ and $Fe^{2+}$. But it was recovered by chelating metals with ethylenediaminetetraacetic acid. The $K_m$ and $V_{max}$ values of the purified enzyme were 4.02 mg/ml and 0.52 mg/min, respectively. The chitinolytic enzyme characterized in this study has potential applications in areas such as biotechnology, biomedicine, agriculture, and nutrition.