• Journal of Advanced Navigation Technology
• /
• v.6 no.4
• /
• pp.318-325
• /
• 2002

In this paper, the effects of the interference environments on the performance of the time hopping(TH) binary PPM impulse radio(IR) system are presented. Based on the monocycle pulse available within the frequency of 3.1~10.6 GHz permitted for application by FCC, a PPM-modulated TH IR system simulator was designed and followed by the analysis of the monocycle pulse characteristics as well as the system performance. Particularly for the evaluation of the system performance, the multiple access interference and the narrowband system interference signals were considered as the interference signals. Since the narrowband system interference signal has very narrow bandwidth and very large amplitude compared with those of IR system, the analysis of the IR system performance was implemented by considering the interference power and band fraction ratio of the narrowband interference signal.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.3
• /
• pp.265-272
• /
• 2009

In this paper, a simple optical method that uses an infrared(IR) cut filter is proposed to minimize variation of eye image by external infrared(IR) sources in a video based head mounted eye tracking system that is used in the field of sports. For this, the IR cut filter is attached to a head mount of the eye tracking system, and the camera with an IR LED is located between the IR cut filter and eye. In this structure, external IR is blocked by the IR cut filter, and the IR intensity on the eye can be controlled by the IR LED. Therefore, the illumination condition of the camera to capture the eye can be stable without being affected by external IR illuminations. To verify the proposed idea, variation of the eye image and intensity of the IR with/without the IR cut filter is measured under various illumination conditions. The measured data show that the IR cut filter method can block external IR effectively, and complex pupil detection algorithms can be replaced by a simple binarized method.

• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.191-197
• /
• 2013

In this paper, we implemented a paper currency recognition system using IR(infrared) sensor. The system has 32 channel IR sensor to measure the reflection and penetration quantity of light. The IR image of paper currency of 10-bit gray scale is used to differentiate the real and counterfeit paper currency with image information from 0 to 4095. The characteristics of IR image are recognized by brightness and darkness and the positions of bright and dark portions are different between real and counterfeit paper currency. The price of IR sensors were relatively high, however, it is good price in these days due to mass production to apply to counterfeit detection area. We used a software table having the IR characteristics of real paper currency to compare with the IR images of the input paper currency. The performance of the implemented system shows 1-2% error rates for Euro real paper currency and 0% error rates for various counterfeit paper currencies of several countries.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.767-773
• /
• 2008

This paper presents a localization system based on the use of electric compass and tracking IR light source. Digital RGB(Red, Green, Blue)signal of digital CMOS Camera is sent to CPLD which converts the color image to binary image at 30 frames per second. CMOS camera has IR filter and UV filter in front of CMOS cell. The filters cut off above 720nm light source. Binary output data of CPLD is sent to DSP that rapidly tracks the IR light source by moving Camera tilt DC motor. At a robot toward north, electric compass signals and IR light source angles which are used for calculating the data of the location system. Because geomagnetic field is linear in local position, this location system is possible. Finally, it is shown that position error is within ${\pm}1.3cm$ in this system.

• Journal of Welding and Joining
• /
• v.23 no.4
• /
• pp.53-58
• /
• 2005

We designed a weld monitoring system with UV and IR sensors using a embedded DSP controller for implementing a distribution system; running stand alone and communication with outside by industrial standard protocols. Also this system provided a USB port in order to be acquiring data in PC. The user interface program in PC visualized the IR and W data in time, frequency and state space. A correlation of IR and UV signals showed closely related to weld quality. A rapid change of geometry can be found through a moving average filter. And the average value of IR signal at an interval represented a welding width and depth. Through these results, we proposed a monitoring algorithm for a integer type DSP.

• 전자공학회논문지 IE
• /
• v.47 no.1
• /
• pp.6-11
• /
• 2010

This research is the result for studding about the IR Rework station which is using a multi-wave IR-heater for soldering and de-soldering on the substrate such as PCB. This IR repair and reflow system is increasing the temperature on the target area under stable temperature control following setting point melting point of solder and lead free solder using IR-heater. So this system is not giving any therrna1 damage on the target PCB and components even closed components. The soldering and de-soldering quality is evaluated through the actual test.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.15-23
• /
• 2016

A study was conducted to evaluate the effects of irrigation (amount, interval) on tree growth, fruit quality, and cracking of organic 'Campbell Early' grapevine in 2012 and 2013. Three irrigation treatments were applied using a sprinkler system from mid-June to mid-August in 2012 and 2013, as follows: 10 mm was applied daily (10 mm-IR), 20 mm was applied every two days (20 mm-IR), and 30 mm was applied every five days (30 mm-IR). Soil electrical conductivity (EC) and temperature were found to be greatest in the 10 mm-IR treatment in both years. Soil moisture content ranged between 20-40% in the 10 mm-IR, between 20-60% in the 20 mm-IR, and between 20-70% in the 30 mm-IR treatment plots. The total number of leaves per shoot and shoot growth were found to be greatest in the 20 mm-IR and 30 mm-IR treatments, respectively. Cluster and berry weights, and cluster and berry sizes were not consistently affected by the treatments. The 10 mm-IR treatment resulted in an increase in fruit SSC, SSC/acidity ratio, and berry skin pigmentation ($b^*$; blue). Approximately 5% of fruit cracking was observed on average over both years in the 10 mm-IR-treated fruit, while the 30 mm-IR treatment resulted in nearly 18% of cracking in 2012. Average marketable fruit yield per year over two years was greatest for the 10 mm-IR treatment ($24.4t{\cdot}ha^{-1}$) followed by the 30 mm-IR treatment ($22.7t{\cdot}ha^{-1}$) and lastly the 20 mm-IR treatment ($22.2t{\cdot}ha^{-1}$). Thus, the 10 mm-IR treatment represents a suitable irrigation regimen for controlling leaf and shoot growth of vines grown under a rain-shelter system in sandy loam soils, while improving fruit sugar contents and skin color and limiting fruit cracking.

• Journal of the Korean Magnetics Society
• /
• v.19 no.5
• /
• pp.171-175
• /
• 2009

The magnetism of the Fe monolayer on Ir(001) substrate [Fe/Ir(001)] was investigated by the first-principles energy band method. For comparison, the Fe and Ir ordered-alloyed monolayer on Ir(001) [Fe$_{0.5}$Ir$_{0.5}$/Ir(001)] was also considered. The calculated magnetic moments for Fe atoms in Fe/Ir(001) system and Fe$_{0.5}$Ir$_{0.5}$/Ir(001) system are 2.95 and 2.83 bohr magnetons, respectively. The detailed aspects of the magnetism and electronic structures for these systems are discussed with the calculated denisty of states and spin densities. The optimized atomic sites for the overlayer Fe and Ir atoms were determined by the total energy and atomic force calculations. The Fe atoms in Fe/Ir(001) move closer to the substrate Ir layer than the Fe atoms in Fe$_{0.5}$Ir$_{0.5}$/Ir(001) do to the Ir substrate.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.1
• /
• pp.16-22
• /
• 2009

This paper aims at designing an impulse-radio ultra-wideband (IR-UWB) transceiver, especially targeting the IEEE 802.15.4a indoor ranging and communication systems. We first investigate the IEEE 802.15.4a IR-UWB signals and suggest the full-digital transceiver architecture accordingly. Since the wireless systems equipped with the impulse signal have the property of low-duty cycle, i.e., discontinuity in time, while the conventional systems takes the continuous signals, it is required to reconfigure the system design, including link budget. Following brief introduction to our IEEE 802.15.4a IR-UWB system hardware, we finally examine the ranging performance in indoor environments to verify our system design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.347-354
• /
• 2011

This paper presents a time-domain based asynchronous IR-UWB ranging system. This system accomplishes the ranging by detecting peaks from the outputs of a correlator implemented by a FIR filter. To discriminate the peaks due to a signal component, we use windowing for the correlated data within which the data are sorted in amplitude-ascending order and the noise level is calculated. Comparing with the recently presented frequency-domain based ranging system, we show the system structure and explain how it operates for ranging. Moreover, through the simulations, the proposed system is compared with the frequency-domain based system in terms of performance.