• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.8-15
• /
• 2019

We describe a common optical system that merges a LADAR system, which generates a point cloud, and a more traditional imaging system operating in the LWIR, which generates image data. The optimum diameter of the entrance pupil was determined by analysis of detection ranges of the LADAR sensor, and the result was applied to design a common optical system using LADAR sensors and LWIR sensors; the performance of these sensors was then evaluated. The minimum detectable signal of the $128{\times}128-pixel$ LADAR detector was calculated as 20.5 nW. The detection range of the LADAR optical system was calculated to be 1,000 m, and according to the results, the optimum diameter of the entrance pupil was determined to be 15.7 cm. The modulation transfer function (MTF) in relation to the diffraction limit of the designed common optical system was analyzed and, according to the results, the MTF of the LADAR optical system was 98.8% at the spatial frequency of 5 cycles per millimeter, while that of the LWIR optical system was 92.4% at the spatial frequency of 29 cycles per millimeter. The detection, recognition, and identification distances of the LWIR optical system were determined to be 5.12, 2.82, and 1.96 km, respectively.

• 한국기계가공학회지
• /
• 제6권4호
• /
• pp.50-56
• /
• 2007

This study aims to find the optimal cutting conditions, when are IR Detection device HgCdTe is machined with diamond tool of diamond turning machine. Machining technique for HgCdTe with single point diamond turning tool is reported in this paper. The main factors influencing the machined surface quality are discovered and regularities of machining process are drawn. It has been found HgCdTe has more and more important applications in the field of modern optics. The purpose of our research is to find the optimum machining conditions for ductile cutting of HgCdTe and apply the SPDT technique to the manufacturing of ultra precision optical components of brittle materials.

• 한국안광학회지
• /
• 제13권3호
• /
• pp.45-50
• /
• 2008

목적: 본 연구는 천연항균물질인 나린진을 소프트 콘택트렌즈 수지용액에 첨가하여 소프트 콘택트렌즈를 제조하고, 제조된 콘택트렌즈에서 용출된 용액의 광학적 특성과 나린진의 물리화학적인 상태 그리고 식염수에서의 용출 특성 등에 대해 살펴보고자 하였다. 방법: 나린진이 첨가된 콘택트렌즈는 벌크(bulk)중합 방식을 이용하여 제조하였고, 제조된 나린진이 첨가된 콘택트렌즈에서 나린진의 결합상태와 식염수로의 나린진 용출과정, 그리고 시간에 따른 나린진의 용출량 등은 적외선 스펙트럼(IR spectrum)과 고성능 액체 크로마토그래피(HPLC)를 이용하여 살펴보았다. 결과: 나린진이 첨가된 콘택트렌즈에서 나린진의 용출은 일정농도를 유지하면서 약 1개월 동안 지속되었고, 용출된 나린진은 첨가하기 전과 동일한 구조를 유지하고 있었으며 투과율과 같은 광학적 특성 변화는 관찰할 수 없었다. IR spectrum과 HPLC 결과로부터 콘택트렌즈 내에서 나린진의 구조와 결합상태를 확인하였다. 결론: 나린진이 첨가된 콘택트렌즈에서 나린진은 폴리머 분자와 반데르발스(van der Waals) 인력이나 나린진 분자의 수산기 (hydroxyl group)와 약한 수소결합(hydrogen bonding)에 의해 상호 결합되어 있는 것으로 판단되었다. 나린진이 첨가된 콘택트렌즈로부터 나린진은 약 1개월 동안 일정농도씩 꾸준히 용출되었으며 1개월 후에도 하루 동안 용출된 나린진의 농도가 약 10 ppm으로 나타나 일정기간 동안 항균력의 유지가 지속적으로 필요한 소프트 콘택트렌즈의 제조에 나린진을 첨가하는 방법이 매우 효과적임을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.91-96
• /
• 2014

Aspheric lenses used in the thermal imaging are typically fabricated using expensive single-crystal materials (Ge and ZnS, etc.) by the costly single point diamond turning (SPDT) process. As a potential solution to reduce cost, compression molding method using chalcogenide glass has been attracted to fabricate IR optic. Thermal deformation of a molded lens should be compensated to fabricate chalcogenide aspheric lens with form accuracy of the submicron-order. The thermal deformation phenomenon of molded lens was analyzed ant then compensation using mold iteration process is followed to fabricate the high accuracy optic. Consequently, it is obvious that compensation of thermal deformation is critical and useful enough to be adopted to fabricate the lens by molding method.

• 한국전기전자재료학회논문지
• /
• 제26권3호
• /
• pp.183-189
• /
• 2013

The chalcogenide glass has superior optical properties in IR region transmittances. We have determined the composition of GeSbSe chalcogenide glass for the application of good IR lenses, resulting in the composite rate of $Ge_{19}Sb_{23}Se_{58}$. The optical, structural, thermal and physical properties were measured by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Differential scanning calorimeter (DSC), X-ray computed tomography (X-ray CT) respectively. The fabrication of the chalcogenide glass lens for infrared optics applications was proposed using a diamond turning machining technology which is known as the suitable ways for the production cost reduction and the accurate fabrication process control.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.92-103
• /
• 2022

The development of midinfrared (mid-IR) quantum cascade lasers (QCLs) has enabled rapid high-contrast measurement of the mid-IR spectra of biological tissues. Several studies have compared the differences between the mid-IR spectra of colon cancer and noncancerous colon tissues. Most mid-IR spectrum classification studies have been proposed as machine-learning-based algorithms, but this results in deviations depending on the initial data and threshold values. We aim to develop a process for classifying colon cancer and noncancerous colon tissues through a deep-learning-based convolutional-neural-network (CNN) model. First, we image the midinfrared spectrum for the CNN model, an image-based deep-learning (DL) algorithm. Then, it is trained with the CNN algorithm and the classification ratio is evaluated using the test data. When the tissue microarray (TMA) and routine pathological slide are tested, the ML-based support-vector-machine (SVM) model produces biased results, whereas we confirm that the CNN model classifies colon cancer and noncancerous colon tissues. These results demonstrate that the CNN model using midinfrared-spectrum images is effective at classifying colon cancer tissue and noncancerous colon tissue, and not only submillimeter-sized TMA but also routine colon cancer tissue samples a few tens of millimeters in size.

• 한국광학회지
• /
• 제35권1호
• /
• pp.24-29
• /
• 2024

본 연구에서는 나노패턴된 금속(Ag)-유전체(PDMS) 다층 기반의 쌍곡선 메타구조를 제안하고 영상 소자용 적외선 차단 필터의 성능에 대해 보고한다. 사각형 모양의 Ag 나노 패턴의 크기와 Ag 나노 패턴을 둘러싼 PDMS의 두께를 최적화함으로써, 제안된 IR 차단 필터가 0.70-1.01 ㎛ 파장 대역의 빛을 99% 차단하면서도 가시광 영역에서 94% 이상의 높은 투과율을 나타냄을 보였다. 차단 파장 대역은 쌍곡선 메타구조의 epsilon-near-zero 파장보다 긴 파장 영역에서 시작하여 Ag 나노 패턴에 의한 플라즈모닉 흡수가 강한 지점에서 끝나게 된다. 근적외선 차단 대역보다 긴 파장 영역에서는 수평으로 인접한 Ag 나노패턴들 사이의 플라즈모닉 커플링 효과로 다시 투과도가 증가됨을 알 수 있다. 이러한 메타구조체는 적외선 차단 필터의 성능을 향상시킬 수 있을 뿐만 아니라 공정 단순화를 통해 초박형 제조가 가능하여, 다양한 평면 광학 및 집적광학 부품들에 적용될 수 있다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.75-83
• /
• 2003

Diode laser absorption system is advantageous of their non-invasive nature, fast response time, high sensitivity and real-time measurement capability. Furthermore, recent advances in room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications are enabling combustion diagnostics system based on diode laser absorption spectroscopy. So, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor system are now appearing for a variety of applications. The objective of this research is to take advantage of distributed feed-back diode laser and develope new gas sensing system. It experimentally found out that the wavelength, power characteristics as a function of injection current and temperature. In addition to direct absorption and wavelength modulation spectroscopy have been demonstrated in these experiments and have a bright prospect to this diode laser system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.167-167
• /
• 2010

Ge-Sb-Se계 칼코게나이드 유리의 Melting 조건변화에 따른 특성변화를 연구하였다. Glass melting 조건(homogenization-temperature, homogenization-time, annealing) 에 따라 제작된 칼코게나이드 유리 bulk를 FT-IR, XRD, SEM 등의 분석장비를 이용하여 특성을 분석하였다. Homogenization temperature가 높을수록 석영관 급냉 시 발생되는 mechanical stress와 내부응력차로 인해 칼코게나이드 유리 깨짐현상이 증가하였으며 조성비와 melting 조건에 따라 XRD분석에서 확인되지 않는 미소결정이 SEM 분석결과 관찰되었다. 본 연구를 통해 칼코게나이드 유리의 melting 조건에 따른 경향성을 확인할 수 있었다.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.67-76
• /
• 2004

Diode laser absorption sensors are advantageous because they may provide fast, sensitive, absolute, and selective measurements of species concentration. These systems are very attractive for practical applications owing to its compactness, reasonable cost, robustness, and ease of use. In addition, diode lasers we fiber-optic compatible and thus enable simultaneous measurements of multiple species along a line-of-sight. Recent advances of room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications make it possible to be applied for combustion diagnostics based on diode laser absorption spectroscopy. Therefore, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor systems are now appearing for variety of applications. The objectives of this research are to develop new gas sensing system and to verify feasibility of this system. Wavelength modulation spectroscopy has been demonstrated in these experiments and has a bright prospect to this diode laser system.