• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1519-1522
• /
• 2009

We describe a 32" liquid-crystal display (LCD) with multi-touch sensing capability by integrating IR detector arrays onto the LED backlight plate. A transparent light guide is placed in front of the display screen, with IR LEDs disposed at its edges and emitting IR light into the light guide, the light is trapped by total internal reflection within the light guide to be as touch-sensing light. A physical contact with the acrylic plate surface will stimulate some trapped light to be escaped from the light guide and pass through LCD panel to be detected by the IR detectors. The touch-sensing LCD with this configuration can locate simultaneous multiple touche points on the touchable surface.

• 한국통신학회논문지
• /
• 제37C권9호
• /
• pp.784-790
• /
• 2012

본 논문에서는 가시광 통신(visible light communication: VLC) 상향 전송에서 전송거리 확대를 위한 전송방식을 제안하였다. 이를 위해 집광된 infrared(IR)-light emitting diode(LED)의 출력을 이용하여 조명에 위치한 광수신부에 전송하였다. 이러한 집광을 하는 경우 지향성이 너무 커서 IR-LED를 조명부 수신모듈에 정확히 향하지 않는다면 전송이 어렵게 되는 문제점이 있는데, 이를 해결하기 위해 여러 개의 IR-LED를 조금씩 다른 방향을 향하도록 배치하고, 수신부와 통신을 통해 이 중 최고의 전송성능을 보이는 IR-LED를 선택하는 방법을 제안하였다. 통신 성능을 주기적으로 감시하고, 성능이 저하되면 LED 재검색 과정을 통해 새롭게 최상의 성능을 보이는 LED로 통신을 교체하도록 한다.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.767-773
• /
• 2008

This paper presents a localization system based on the use of electric compass and tracking IR light source. Digital RGB(Red, Green, Blue)signal of digital CMOS Camera is sent to CPLD which converts the color image to binary image at 30 frames per second. CMOS camera has IR filter and UV filter in front of CMOS cell. The filters cut off above 720nm light source. Binary output data of CPLD is sent to DSP that rapidly tracks the IR light source by moving Camera tilt DC motor. At a robot toward north, electric compass signals and IR light source angles which are used for calculating the data of the location system. Because geomagnetic field is linear in local position, this location system is possible. Finally, it is shown that position error is within ${\pm}1.3cm$ in this system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.214-217
• /
• 2002

The internal quantum efficiency of organic light emitting devices(OLEDs) using fluorescent organic materials is limited within 25% because of the triplet excitons which can hardly emit light. So there has been considerable interest in finding ways to obtain light emission from triplet excitons. One approach has been to add phosphorescent compounds to one of the layers in OLEDs. Then triplet excitons can transfer to these phosphorescent molecules and emit light. In this study, multilayer OLEDs with phosphorescent emitter, Iridium complexes were prepared. The devices with a structure of ITO/TPD/Ir complex doped in the host material/Alq3/Li:Al/Al were fabricated, and its electrical and optical characteristics were studied. Using various Ir complexes and the host materials, we fabricated several devices and investigated the device characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.648-650
• /
• 2007

We demonstrate highly efficient White Polymer Electrophosphorescent Light-emitting Diode using newly developed green and red light emitting heteroleptic iridium complex, Ir-(pq)2tpy, and blue light emitting fluorescent dopant, BczVBi. The best luminous efficiency reached 28cd/A with maximum luminance of 87000cd/m2. The scheme for determining optimum device architecture and dopant concentrations were constructed.

• 마이크로전자및패키징학회지
• /
• 제18권4호
• /
• pp.79-83
• /
• 2011

White phosphorescence polymer light emitting diodes (WPhPLEDs) with a glass/ITO/PEDOT:PSS/PFO:$Ir(ppy)_3$:MDMO-PPV/TPBI/LiF/Al structure were fabricated to investigate the effects of $Ir(ppy)_3$ doping concentrations on the optical and electrical properties of the devices. PFO, $Ir(ppy)_3$ and MDMO-PPV conjugated polymers as host and guest materials in the emission layer were spin coated at various concentrations of $Ir(ppy)_3$ ranging from 0.0 to 20.0 vol.%. As the concentration of $Ir(ppy)_3$ increased from 5.0 to 20.0 vol.%, the luminance and current efficiency values of the devices decreased clearly, which are attributable to the quenching effect at a high doping concentration. The maximum luminance and current density were 2850 $cd/m^2$ and 741 $mA/cm^2$, respectively for a WPhPLED with an $Ir(ppy)_3$ concentration of 5.0 vol.%. The CIE color coordinates were about x=0.33 and y=0.34 at 11V, showing a good white color.

• 한국콘텐츠학회논문지
• /
• 제16권11호
• /
• pp.693-698
• /
• 2016

학대나 폭력을 입증할 수 있는 증거 중 하나인 멍은 크게 외력에 의한 것과 음압에 의한 것으로 나뉜다. 외력에 의해 생성된 멍에 관한 연구는 많지만, 음압에 의해 생성된 멍에 관한 연구는 적다. 적외선 광원으로 멍을 촬영한 선행연구들을 살펴보면 하나의 적외선 광원과 필터만을 사용하여 실험했다는 문제점이 있다. 본 실험의 연구자들은 적외선 광원과 필터의 조합에 따라 멍의 촬영 결과물이 다른 양상을 보일 것으로 생각하였다. 따라서 세 종류의 적외선 광원과 다섯 종류의 적외선 필터를 사용하여 음압에 의해 생성된 멍을 촬영하는데 최적의 조합을 찾고자 하였다. 그 결과 750 nm 영역을 포함하는 텅스텐과 이 영역을 투과시키는 필터인 Kodak Wratten #18A를 사용했을 때 가장 좋은 결과를 얻을 수 있었다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.249-251
• /
• 2002

The avian pineal as well as the retina has been known to contain several types of photoreceptors with different visual pigments such as rhodopsin, iodopsin and the pineal specific opsin, pinopsin. These organs are also known to have circadian clock to regulate melatonin production. Exposure of animals to light causes a decline of the melatonin level and the phase shifts of melatonin rhythms in the pineal and retina. Therefore, the circadian clock system of these organs seem to consist of three elements, i.e., light input, oscillator and melatonin output systems. In birds, it was suggested that rhodopsin might be involved in the entrainment of pineal melatonin rhythms from the action spectrum experiment for controlling NAT activity rhythms. However, there are much more pinopsin-immunoreactive (Pino-IR) cells than rhodopsin (Rho-IR) and iodopsin (Iodo-IR) cells in the avian pineal. We found that Pino-IR cells appeared earlier embryonic stages than Rho-IR and Iodo-IR cells. So, we tried to identify the visual pigments involved in the circadian melatonin rhythms in the pineal and retina. Organ cultured pineals were exposed to monochromatic light to find out which opsin participates in regulation of melatonin rhythms. The action spectra showed a peak at 475nm, suggesting that pinopsin is the major photopigment to regulate melatonin production in birds.

• Transactions on Electrical and Electronic Materials
• /
• 제12권2호
• /
• pp.80-83
• /
• 2011

We have fabricated phosphorescent white organic light-emitting devices (WOLEDs) with a spin-coated poly(Nvinylcarbazole) [PVK] host layer. Iridium(III) bis[(4,6-difluorophenyl)-pyridinato-N,$C^{2'}$]picolinate (FIrpic), tris(2-phenylpyridine)iridium(III) [$Ir(ppy)_3$], and tris(2-phenyl-1-quinoline)iridium(III) [$Ir(phq)_3$], were used as the blue, green, and red guest materials, respectively. The PVK was mixed with FIrpic, $Ir(ppy)_3$, and $Ir(phq)_3$ molecules in a chlorobenzene solution and spin-coated in order to prepare the emission layer; 3-(4-biphenylyl)-4-phenyl-5-(4-tertbutylphenyl)-1,2,4-triazole (TAZ) was used as an electron transport material. The resultant device structure was ITO/PVK:FIrpic:$Ir(ppy)_3:Ir(phq)_3$/TAZ/LiF/Al. The electroluminescence, efficiency, and electrical conduction characteristics of the WOLEDs based on the doped PVK host layer were investigated. The maximum current efficiency of the three wavelength WOLED with the doped PVK host was 19.2 cd/A.

• 센서학회지
• /
• 제29권5호
• /
• pp.303-311
• /
• 2020

Nondispersive infrared CO₂ gas sensor was developed after the simulation of optical cavity structure and assembling the optical components: IR source, concave reflectors, Fresnel lens, a hollow disk, and IR detectors. By placing a hollow disk in front of reference IR detector, the output voltages are almost constant value, near to 70.2 mV. The absorbance of IR light, F_a, shows the second order of polynomial according to ambient temperatures at 1,500 ppm. The differential output voltages and the absorbance of IR light give a higher accuracy in estimations of CO₂ concentrations with less than ± 1.5 % errors. After implementing the parameters that are dependent upon the ambient temperatures in microcontroller unit (MCU), the measured CO₂ concentrations show high accuracies (less than ± 1.0 %) from 281 K to 308 K and the time constant of developed sensor is about 58 sec at 301 K. Even though the estimation errors are relatively high at low concentration, the developed sensor is competitive to the commercial product with a high accuracy and the stability.